How to Stop Blowing RZR Belts
ฝัง
- เผยแพร่เมื่อ 29 ก.ค. 2024
- hunterworks.com/lower_belt_temps
Link to our Polaris Belts
www.hunterworks.com/hunterwor...
This video is about how to install another blue washer in the primary clutch of a RZR XP 1000 and how to stop blowing belts. Click that link for the tech article on it. - ยานยนต์และพาหนะ
![บุษบา - เมนทอล [Official MV]](http://i.ytimg.com/vi/IGnWPokSEis/mqdefault.jpg)
Great set of new videos Todd! I could never figure out why i kept ripping teeth of those Gates belts. I've learned so much about my Xp from your site and channel..
Appreciate that!!
You missed your calling in life and should have been a teacher. LOL. Great video and I appreciate you taking the time to show what you have learned. I didn't know what the blue washer was for and had removed mine. Going to put it back in. Cheers
Talked to you and fixed my 2017 XP 1000 with 32s at the end of last summer. Right after I added the washer and your belt, I snapped my reverse chain. After getting the transmission back in I've done 200 miles with tons of 60+ all the way up to top speed for extended time with no issues. Totally stopped my RZR from ripping off bottom teeth and no other belt issues either.
Dude! My RZR ripped off bottom belt teeth too! What causes that?
I have that same impact gun and it has served for years with no problems. Milwaukee power.
fantastic info, I'm learning a lot about rzr, I'm going to try your belts, thanks
Clint Buccola I feel like like people repairing there Polaris so much there learning about them I don't know of that's a good thing or a bad thing
Great information Todd, thanks
I appreciate the videos. Good information.
Great tips! Thanks for sharing.
Over 2000 miles with a Gates belt and then one afternoon of near wide-open going ten miles down a road chasing rally cars to the next check point and my belt blew teeth. Now I know why. Two blue washers on order. Thank you.
MinnesotaEric could have just got our white. But it may not be enough for the gates to run wide open.
@@Hunterworks Wait. Stop. You didn't say anything about a thinker washer than the stock blue. LOL Are you suggesting an 1/8" shim is best? If I need to, I'll cut another washer out of plastic sheet stock.
MinnesotaEric this video is older than our washer is. We have videos on it too. Also have a updated version of this video
@@Hunterworks Add a card right at the beginning of your video that points to your new white washer video, or delete this old video since you seemingly have not monetized these videos. Anyway, I ordered your new white washer, and for twice as much money, I ordered two old blue washers. Sigh. LOL
They are monetized and if you had two blue you didn't need to buy our white. But with the gates you might need three blue or our white and one blue to stop it from blowing at high speeds or just buy our belt
Well done Todd
I own an 2020 Arctic Cat XX and because of these videos I somehow managed to get 5,000+ miles and never blown a single belt I replace them(@1,500) out of fear but still have them all?? Today 10/10/22 I finally got/needed a brand new clutch and hope to get another 5,000+ miles wishing he had belts for my machine but anyways his "Knowledge" is the Secret to extended belt life no doubt!!!!
Thanks for your comments
"Just know when to quit. "
works in so many aspects of life ! 😁
What does this mean?
@@Hunterworks know when to quit the cordless impact wrench, know when to quit the drinking, know when to quit smoking, etc.
Yaknowhatimsayin?
Can't believe you are using that impact ;) :) LOL....sorry...I had to. Really good video!
Wow great content I got a 500cc scooter with the CVT transmission and we put a washer on our variator is called the fuzzy washer basically that's the same thing you but mine's not blue I like the blue washer
Thanks for getting back is there anything I need to do to it it's for my daughter and she easy on the machine and this is our first time owning a side by side.
Liked & Shared On My Facebook Page. Always Appreciate You Sharing Your Knowledge Todd! Thanks!
Thanks
Sorry to say but Gates Belts have been garbage for years.. Thanks for the clutch adjustment tips.. Blue washer going in!!
I’m gonna order the blue washer and a belt for a spare. I got a 2018 xp, you stated that Polaris doesn’t even have the 1 washer. So should I order 2 washers to be on the safe side? Thanks so much for the helpful videos.
Great job
I use a silver washer and it works even better. Going to try a magenta washer soon
2016 xp 4 1000 getting misfired codes and they said i burnt a belt. 2016 highlifter i was with did same thing but blew belt into pieces. confirming a second blue washer on the primary with help not burn up new belts on? also great video (ironically i cant wait to get to try one of your belts, hopefully its not a blow out though)
Love your videos! Very informative,I'm going to subscribe! I have 2016 Ace 900 SP ,would it need the blue washer? Thanks
I don't know without looking that one up, if just one blue then yes if you are a high speed rider
Interesting design for a cogged belt. You would think that would be more of a v belt design.
I use a torque stick of 100 ft lbs on my impact and it just makes me feel better maybe wrong way to do it but like you said it’s hard to hold the primary clutch
That’s a good idea
I have a 18 general 4 I recently bought but am upgrading the clutch because of 32” tires. Are the generals common for needing the blue washer as well? Also looking to invest in the blower and temp sensor
You could check the travel and see but have not heard of them being an issue
Will it work on a 2012 Rzr 900 xp4. I keep blowing belts. So I just added the Blow Hole Fan but haven't tried it out. Is there anything else I can do to stop busting belts ?
I would need more info, email at todd@hunterworks.com
I have a 2019 highlifter razor, i know it has a thicker or bigger belt, do i need to check for 2 blue washers?
For sure check
I was just looking at your belts and I have. 2014 1000 and do you recommend the standard or thick?
Depends on riding style, fast std, slow thick
Will this blue washer trick work for 2018 Polaris sportsman 1000. It just destroyed the stock belt with 150 miles on it run 30 inch tires
To be honest I do not know, we only do UTV clutching so without a vehicle here to test. I can't say
Will this be a good idea to add on my 2019 sportmans xp 1000 both washer and belt?
DemBallBoys we don’t offer a belt for it and never checked over travel on one. Sorry
Will that washer in the Primary clutch work with a 2007 Polaris Ranger 700 6x6 EFI?
Maybe but it does not need it
So will the blue washers fit a 2016 xp 41000 or the white ones? one more thing i bought a set of 32" Tensor Regulator tires and wanting to put them on,on my factory wheels which r 29x9x14" fronts < Rear r 29x11x14" and i havent installed aftermarket clutches it still running on stock clutches my question is will i run into problems if i use them big tires on stock clutches? And i dont do crazy stuff on my rzr or race;sometimes i jump but not rarely just regularly driving on sand and mud no rock climbing yet,and im gonna replace my square pucks to round ones what do u recommend ? thanks, love your videos Mr.Todd
black panther3045 hernandez Thank you for your comments and shoot me this in the mail Todd@Hunterworks.com
Todd I have a 2020 Xp 1000. Do you still recommend the BlowHole fan? If so is there one that would fit mine and plug in
yes still a good idea, same one fit them all, plugs into the tail light
Purchased 2016 900s new only 226 miles very few hrs and is stock no riding till spring I will then change all fluids,oils etc.should I add the extra washer?I do need a spare belt will purchase yours what one would you recommend will keep Oem for spare also should I change to round rollers or the pucks I’ve heard about. I can wrench just haven’t tore a clutch apart new to the RZR nuby thank for any info
You should do the rollers but you probably ok without the washer, have not heard of 900 doing this.
Does limiting that throw with the blue washer limit top end speed?
professional motion not sure what you’re asking but adding a second blue washer or now our std white washer in their place does not affect top speed. Seems like in video I mention I ran 85 with them in there
Will this make a difference on 570rzr or just the bigger ones
Jevon Thomas does not affect the 570.
2019 turbo s rzr xp4. Can I use the Blue washer?
No we have a black one and whole another video on it.
What couses a 2007 danger at belt to have to be at higher RPM to engage an it also jurcks when it does engage please help.
Worn out primary probably
I have a 2018 rzr 4 900 would I need to check for washer
Probably not, mostly just the XP 1000 and other 1000 vehicles
So just to be clear, my 2017 XP 1000 should have one blue washer installed already from the factory. You are suggesting adding a second to limit the range of the primary slightly?
That is correct
Cool where can I get one?
@@AllThingsOffroad69 polaris dealer of if you call an order in, we can put one in your order for $5
Awesome! I’m going to order one of your belts. I didn’t see the washer on your website. Great videos! Thanks
What is your opinion on not using the belt cover?
jake barnier too much dirt
would that work on a 2016 RZR Turbo
No, meaning the blue washer
Is this the same on a 2017 xp4 turbo. Mine did have any blue washers on it.
Turbo is different
So do I not need to do the blue washers or should I still do it as a precaution?
I can't say at all, no idea if it needs it or this would work in a turbo
What is the best belt can-am camander
Ours
Learning a lot from your videos i have a 2015 rzr4 eps. How often you replace the blue washer, and do I install 2? Finally experienced first blowing belt. Close to 3000 miles, had a spare always, blue washer makes a lot of sense. Any info would be appreciated 🇺🇸🇺🇸
Assuming a XP 1000 you have have, we do not use the blue, we make our own washer and it is just one. However with 3000 miles, you might have more going on, you are in the average lifespan of the primary . The washers really do not wear out, they get mashed from spider nut and spider backing off though
@@Hunterworks I'm not sure if there's even a washer in it i've never Took it a part, Would you know if players makes that part for the razor 4 900 Eps
@@randy-yo8zi yes they’re supposed to be one in there too
@Hunterworks Ok, thank you for your time. I will look into it. I'll look in to it tomorrow evening. Hate to keep bothering you guys. Im new at this rzr stuff🇺🇸🇺🇸
WILL THE WASHER WORK ON A 2014 POLARIS RZR 570?
Not needed and no sir
Would this apply to RS1 as well
Not to my knowledge and it has the turbo clutch on it or turbo style
Hi todd, im not seeing a washer available on your website for the 2024 XP1000 - is it not available? or look under another model
not needed, totally different clutches
@@Hunterworks thank you!
Will your white washer help a 2020 Turbo?
Laine Kennedy no it’s not for turbos. Our black washer is. Go to our site then turbo rzr page you will see it. There is also a video here on our channel about it
Where can I order that blue washer ? I have the stock 2017 xp 1000 , the belt blew about three times now
Probably not just a washer but we sell our own STD white washer, same as two blue. Shoot me an email todd@hunterworks.com and I can help you find your issue
I just bought a 2020 rzr 900 s will this work on my new rzr ?
Typically not needed on 900 but swapping out the square pucks in the secondary for our round ones is still a no brainer
Any after market companies making a fan for belt housing?
We do, look on our site
Whats the best belt I can I am commander one thousand nineteen model
Our belt. We have just one.
will this work on a 2015 RZR 1000
Yes
Is the blue washer an issue for the pro xp??
No just non xp
Will this work for the can-am maverick x3?
I’m sure some applies
Does having the blue washer in there effect the top speed at all as it limits the primary and secondary movement?
No, too small of change, puts belt where it should be
@@Hunterworks awesome. Thanks for the reply. Just wanted to check
Do you need one or two blue washer on this replacement
Neither, our std white washer is the only one you need
If I never blown a belt. Should I add the second washer?? Have stock clutching.
You are probably not a high seed for distance guy. This is a old video, we make our own washer that is as thick as two blue
Hunterworks Inc. okay thanks. Going to be ordering the secondary rollers soon.
My transmission on my Polaris Ranger UTV is getting to hot causing my secondary clutch to blow belts and melt the buttons in the clutch
Never heard of that but get that tranny fixed
You should do some stuff for can am
True but I don't know much about them and no access to one.
Does this pertain to 900 rangers too. ?
Blue washer wize
No sir
Will this work on a 2013 ranger 900 xp?
no sir, it dos not even have a spider nut that is under the washer
Does the blue washer apply to the 2019 turbo S?
And what belt do you recommend for that unit?
Devro777 no we have a black washer for turbo and we recommend our belt
Do you have a part number for both? I’d love to order them from you
@@dieseldev7 www.hunterworks.com/polaris_turbo_rzr
hello what washer did you use? and where can i buy them?
One and us
Hunterworks Inc. i remove stock washer and use a blue one from you guys right? overall just 1 washer
@@dannyboyrides4507 This video is old, there is a newer one, we have our own washer, twice as thick as one blue. In this video we said use two blue, now one std washer from us
Hunterworks Inc. got it, i have a 2016 rzr XPT, what washer and belt would you recommend? i see you guys have 2 washers on your website
Is there a way to monitor the temp of that belt?
Edit: In real time
Yes, with a belt temp gauge we sell uses infrared beam
Will this work on 2012 rzr900
Yes, remove your washer and add this one
I have a 2012 xp4 900, I just installed the Hunterworks fabricated white washer. It has made a world of difference.
I have an 09 700 ranger. It just bucks when you put it in gear. Quits if you keep pressing gas. Any ideas?
What do you mean it bucks. Explain, you put in gear do not touch the gas and it does what?
It's like you put it in gear and give it a touch of gas, then it acts like it is stopped by a brake, then back in the gas, then on the brake again without ever touching the brakes. Takes about 10 minutes to go 25 ft
@@j.ewilkinson9294 That is a weird one but that is in the primary clutch, watch our how to troublshoot a primary clutch video
Yo have any belts for a 2018 RS1...Thanks..or Washer...
Summit dave www.hunterworks.com/inc/sdetail/96685/96896
Summit dave no washer needed on a rs1
Is that cuz there is one or just dont need it..And thanks...
Wow you did have one..I even looked at your page before asking you...lol
Where do you buy these blue washers?
Old video, we have the replacement, a STD White washer on our site, same thickness as two blue
@@Hunterworks ok thank you!
So do you recommend one or two blue washers on at the same time
Neither, I recommend our STD washer, same as two blue
@@Hunterworks does white washer in dalton kit do same thing??
@@march966 no most of their kits that’s a secondary spring.
@@Hunterworks ok tks cause i put dalton mine remember was white teflon washer but i had it installed so i wouldnt know
Does this apply to the Turbo or XP1000. Couldn't find anything on you're site. Thx
Ben Gordon this video does not but we have a video on the same thing for a turbo and black walker for them. They are on our turbo page
@@Hunterworks can't find any video on the washer that has to do with 2018 Turbo. I bought 2 blue washers because I thought you were working on a Turbo.
@@ReDNeckRoY hunterworks.com/inc/sdetail/88526/120443
There is the link to the black washer on our site for a turbo and there is a video link on that page too. Not sure how you got that this video was about a Turbo. Without watching it again myself I don't think a turbo is ever mentioned
@@Hunterworks I must be computer dumb because I can't find the video.
this fix is for rzr 1000 . do I need this on my ranger 900?
no sir, it should not have a temp issue
@@Hunterworks thanks man, hey did u just make your own use or do u sell the heat gauge?
@@BillyTpower Heat gauge? If you mean belt temp gauge we sell them, rare for a ranger owner to buy one
I have a 2018 xp1000. 40hrs. I put your secondary rollers on right when I bought it. I haven't been having an issue with belts. Should I still install an additional washer?(assuming I already have one currently in my primary)
Up to you, if you drive fast a lot I would
If not no but it can't hurt
?, I assume this fix works for the Polaris Ranger class as well??
Not really applicable to them
will it fit rzr 800s 2010
no and no need for it
@@Hunterworks 👍👍👍👍👍
👍
How do u keep belt from slipping when going through water?
Jorge Lopez keep water out is only way
@@Hunterworks lol. I'll keep that in mind. Thanks brother
I stopped blowing belts by selling the RZR and buying a Honda Pioneer. Yes, I know....low HP, but HP is nothing when you're broken down in the bush. NO belts on a Honda to blow. Shaft driven. Why doesn't Polaris put a shaft drive in their machines? It's because Honda holds the Patent on their shaft driven system. Good video though.
I have only blown one belt and it was my fault and have had a ton of Polaris and you could not give me a Honda, the transmission go bad in those all the time too. But please take no offense the videos are to help owners of the vehicles, selling it and getting nothing fixes the issue too but that is not what these videos are about.
@@Hunterworks No problem
Uh huh huh, Beavis.... He said finger control!!!!
Hey pull my finger!
Spray foam in that building.... Glad I never went that route.
Glad I did, it is amazing stuff
@@Hunterworks I did mineral wool and don't have any echo.
@@grasscutter88 oh, thought you meant for insulating, yeah there is some echo
If you need this guy to fix a machine that came from the factory as a piece of crap then you bought the wrong machine. Polaris are poorly designed. Plastic cvt cover that warps and lets water in? Wtf! Then its $2000 for a new primary lol
Having been a millwright for 35+ years … there is a reason for following torque spec’s . It drives me crazy when someone makes a comment that the know the feel of their impact tool . Sure it hasn’t happened yet … 1 year … 15 years … but it will happen, either a broken screw / bolt or worse cracked housing . Ending my subscription….. Bye 👋👋
Bye. I’ve been a clutch guy for 19 years the broken bolts were from torquing. It has its place on some but on this one no good way.
Simple question, how would you hold this primary while torqueing it?
This is why we do this, got this email today "I saw on one of your videos that it’s common to break one or more of the 6 bolts off in in the primary by using a torque wrench"
5438963 (Part number to copy and paste)
OliveAbortions we have our own washer now if that’s the part number for blue washer
hunterworks.com/inc/sdetail/56301/109223
washer and hunter belt needed for 23' Rxr XP4 1000???
Using an impact on something that requires 7lbs of torque is just bad advise- might have worked for you- but to tell people “finger control” is simply lazy nonsense. Pull out your torque wrench and do it correctly if your going to make TH-cam videos… just sayin…
Way more broke these with torque wrenches than an impact. 19 years no one has reported broken with impact. Tons with torque wrench. I’ll keep doing it this way.
Do you need the blue washer if u start running the hunterworks belt?
The washers have nothing to do with what belt is on there. Our std washer fixes the overtravel issue with the clutch
@@Hunterworks thank you.. I thought I heard somewhere in the vid that the hunterworks belt was part of solving the belt problems
@@Super-no1fx I’d have watch myself. This video is four years old. Things have changed since to some extent
@@Hunterworks ur time is appreciated.. thanks for your very informative vids.. I’m getting some heavy jerking and perhaps belt slippage in a gen xp4 1000 I picked up with 500 miles.. no where near as smooth as my razor ..off hip I gather belt check followed by checking spider nut ?
@@Super-no1fx send me an email on this one todd@hunterworks.com
this apply to a xp turbo 2017?
Kinda. We have a turbo specific video for that