Leveling sensor is called "leveling valve" baby drive shaft is called a. " jack shaft " . But we knew what you meant . Nice to see a owner/operator out there that can an will work on their truck . Few and far between these days ...
@@stormyweather9054 yeah I think I called it a sensor and valve both 😂😂😂 in hot rod world it would be a sensor since those are electric, trucks are air so yes it’s a valve 👍🏻👊🏼🙌🏼 I meant to be a driver, but the Lord had plans for me to work on this truck before I drive it again 🙏🏻🙏🏻👊🏼👍🏻 I am having a ball getting Gertrude up and running 😂👊🏼👍🏻🔧🔧🔧🔧 thanks for watching 🎥🎥🎥
When i seen David's legs between the tires a thought Gertrude turned in to Christian and was doing him in.🤣 Angie you done a fine job moving the truck and moving those drive shafts to the garage. Looking forward to more on the old girl.
@@JasonMyers-c6z been so busy fixing stuff haven’t even noticed air cleaner lid 🤣🤣 yeah my driveshaft guy is going thru each piece 🙌🏼🔧🔧🔧 thanks for watching 👍🏻🎥🎥🎥
Hello Yall !! looks like we use the exact creeper !!Thats great . i was curious, if that was the problem , always good when its something simple .I like the way Yall # the episodes too !! enjoyed it !! Take Care !!
@@jamesconn7311 thanks 👊🏼 ya like my creeper 🤣🤣 it’s a limited edition 👍🏻😂👊🏼🔧🔧🔧 yeah I figured there was going to be quite a few episodes so I thought I would number them for me and everyone else to keep track easier 🙌🏼👍🏻 thanks for watching 🙌🏼👊🏼🎥🎥🎥
When putting the drive shafts back in too, they need to be clocked with each other. Otherwise, they'll be out of balance with each other and you'll get some big time vibrations.
@@JasonMyers-c6z yes sir i painted each yoke so I know where it goes and what phase it was on 👍🏻👊🏼🙌🏼🔧🔧🔧🔧 I don’t always make the smartest decisions, but I tried to think ahead on this one 🤣🤣 👍🏻👊🏼🙌🏼🔧🔧🔧
Looks to be that the truck 99-02 has had the later model 05- newer rear suspension added to the original frame for that long frame look. Prob why it has an additional driveshaft. Nice project trk wish i had it
I was told it was a 2007 cutoff, was told it has 600,000 on the truck since modified. we will get all of this sorted out and have a really cool truck when we are done. and yes project is the right term 😂😂😂😂😂😂🔧🔧🔧🔧🔧🔧 thanks for watching
Make sure you have set the ride height properly for the suspension that you have. Usually you measure bottom of frame to middle of rear axle or top of rear axle.
I missed exactly what your mission is with the truck? I heard something about drives haft. The drive shaft must be properly aligned or you will have viberation. (All over the place) The proper height is really critical on the leveling valve. That was discussed on your last video. (Or that I have saw).
@@ronnieterry4916 well my mission is to haul cars for the shop to shows, but first I have to fix the truck 🤣🤣 yeah not sure if the leveling valve not being hooked up caused U joints or that was separate 😮😄🔧🔧 but anyway caps were spinning in yokes, needed to fix that 👊🏼🙌🏼🔧🔧🔧🔧 thanks for watching 👍🏻🎥🎥
You need a special extractor tool for those U-joints. It would make the job a lot easier. Being that I used to be a diesel mechanic, i used one almost daily.
@@JasonMyers-c6z I got all these out pretty quick, guess it’s cause they were spinning on the caps, if they were old seized U joint would have been different story 😂😂😂 I know the tool you talking about, think Tiger makes the one I’m thinking about 🔧🔧🔧 thanks for watching 🎥🎥👍🏻👊🏼 we appreciate it
actually we think it was the driveshafts, actually multiple problems going on, leveling valve came off, so truck rode with driveshafts at bad angles. then driveshafts and U joints were worn slap out to compound the problem. so after 2 weeks in driveshaft shop we just got all 4 driveshafts back. now we get to put them back in. thanks for watching
@@andhotrodshop put blocks between the fame and the axle housing that way when the air dumbs out of the suspension it will be easier to get the drive shafts in
![[LIVE] นาทีนี้ต้องพี่ทนาย | ทนายแก้ว vs ทนายไพศาล | #คุยให้เด็กมันฟัง EP.47 (02/11/67)](http://i.ytimg.com/vi/HmquaO-PL_M/mqdefault.jpg)
![⭐ฮิตในTikTok!! ( หมูเด้ง MooDeng ) Ver. แดนซ์โจ๊ะๆ ReMix BY [ ดีเจกิต รีมิกซ์ ]](http://i.ytimg.com/vi/3krsyfWUeHU/mqdefault.jpg)
Leveling sensor is called "leveling valve" baby drive shaft is called a. " jack shaft " . But we knew what you meant . Nice to see a owner/operator out there that can an will work on their truck . Few and far between these days ...
@@stormyweather9054 yeah I think I called it a sensor and valve both 😂😂😂 in hot rod world it would be a sensor since those are electric, trucks are air so yes it’s a valve 👍🏻👊🏼🙌🏼 I meant to be a driver, but the Lord had plans for me to work on this truck before I drive it again 🙏🏻🙏🏻👊🏼👍🏻 I am having a ball getting Gertrude up and running 😂👊🏼👍🏻🔧🔧🔧🔧 thanks for watching 🎥🎥🎥
We do not miss dinner either LOL can't wait to see you install the drive shafts
@@DriveTFY I did not get this big by starving 🤣🤣🤣 hopefully I get driveshafts back this week 🙌🏼👊🏼👍🏻🔧🔧🔧
When i seen David's legs between the tires a thought Gertrude turned in to Christian and was doing him in.🤣 Angie you done a fine job moving the truck and moving those drive shafts to the garage. Looking forward to more on the old girl.
@@tfjack97 at least Christine fixed herself 🤣🤣🤣🔧🔧🔧 I will tell Angie to keep going, she likes the positive comments 👍🏻👊🏼 thanks for watching 👍🏻🙌🏼🎥🎥🎥
God bless yall keep the videos comming love the truck ❤
thanks, God Bless you too. we will have plenty more videos with Gertrude the Peterbilt 😂😂😂🔧🔧🔧🔧 i keep finding things to work on. Thanks for watching.
I was waiting on Angie to take off down the driveway lol😂
@@CamshaftGarage 🤣🤣🤣 she did great for second time behind wheel 👍🏻👊🏼🙌🏼 next is backing up the trailer 👍🏻👊🏼🙌🏼
@andhotrodshop make sure you get some good video. We got some people that work with us that drives for a living and can't hardly back a trailer lol
@@CamshaftGarage I have been working with Angie for years on car trailers, now she is going to step her game up to the big leagues 😂😂😂
@andhotrodshop She's got nothing to worry about then the bigger the trailer the easier it is to back
its that long tractor and short trailer will get ya. its why people cant back a lawn mower trailer behind a crewcab, they ain't ready for it 😂😂😂
Those air cleaner tops are weird looking. I'd be changing those out. Don't forget to get new carrier bearings, too. You'll be glad you did.
@@JasonMyers-c6z been so busy fixing stuff haven’t even noticed air cleaner lid 🤣🤣 yeah my driveshaft guy is going thru each piece 🙌🏼🔧🔧🔧 thanks for watching 👍🏻🎥🎥🎥
Hello Yall !! looks like we use the exact creeper !!Thats great . i was curious, if that was the problem , always good when its something simple .I like the way Yall # the episodes too !! enjoyed it !! Take Care !!
@@jamesconn7311 thanks 👊🏼 ya like my creeper 🤣🤣 it’s a limited edition 👍🏻😂👊🏼🔧🔧🔧 yeah I figured there was going to be quite a few episodes so I thought I would number them for me and everyone else to keep track easier 🙌🏼👍🏻 thanks for watching 🙌🏼👊🏼🎥🎥🎥
@@andhotrodshop Thanks !!
When putting the drive shafts back in too, they need to be clocked with each other. Otherwise, they'll be out of balance with each other and you'll get some big time vibrations.
@@JasonMyers-c6z yes sir i painted each yoke so I know where it goes and what phase it was on 👍🏻👊🏼🙌🏼🔧🔧🔧🔧 I don’t always make the smartest decisions, but I tried to think ahead on this one 🤣🤣 👍🏻👊🏼🙌🏼🔧🔧🔧
We always called it timed, you will not believe the vibration it causes when not timed.
Looks to be that the truck 99-02 has had the later model 05- newer rear suspension added to the original frame for that long frame look. Prob why it has an additional driveshaft. Nice project trk wish i had it
I was told it was a 2007 cutoff, was told it has 600,000 on the truck since modified. we will get all of this sorted out and have a really cool truck when we are done. and yes project is the right term 😂😂😂😂😂😂🔧🔧🔧🔧🔧🔧 thanks for watching
Make sure you have set the ride height properly for the suspension that you have. Usually you measure bottom of frame to middle of rear axle or top of rear axle.
@@flatglass yeah it was just the bolt fell out of the level sensor 👍🏻 lucky the ride height rod stayed on the truck
I missed exactly what your mission is with the truck? I heard something about drives haft. The drive shaft must be properly aligned or you will have viberation. (All over the place) The proper height is really critical on the leveling valve. That was discussed on your last video. (Or that I have saw).
@@ronnieterry4916 well my mission is to haul cars for the shop to shows, but first I have to fix the truck 🤣🤣 yeah not sure if the leveling valve not being hooked up caused U joints or that was separate 😮😄🔧🔧 but anyway caps were spinning in yokes, needed to fix that 👊🏼🙌🏼🔧🔧🔧🔧 thanks for watching 👍🏻🎥🎥
You need a special extractor tool for those U-joints. It would make the job a lot easier. Being that I used to be a diesel mechanic, i used one almost daily.
@@JasonMyers-c6z I got all these out pretty quick, guess it’s cause they were spinning on the caps, if they were old seized U joint would have been different story 😂😂😂 I know the tool you talking about, think Tiger makes the one I’m thinking about 🔧🔧🔧 thanks for watching 🎥🎥👍🏻👊🏼 we appreciate it
Good video. Did you get the transmission repaired already ? Stay safe everyone. God bless you.
🙏🙏🙏🇺🇸🇺🇸
actually we think it was the driveshafts, actually multiple problems going on, leveling valve came off, so truck rode with driveshafts at bad angles. then driveshafts and U joints were worn slap out to compound the problem. so after 2 weeks in driveshaft shop we just got all 4 driveshafts back. now we get to put them back in. thanks for watching
Hope your got wheel blocks under there never trust the parking brakes or gear box
@@alanlanghorn9528 yeah it’s in front of drivers side front tandem 👍🏻🙌🏼👊🏼 don’t want to be flat 😂😂 thanks for watching 🎥🎥
Dewalt dfc 961 save yourself some trouble best cordless in the game rn.
@@6.0king might have to check that out, mine is a DCF889H 👊🏼🙌🏼🔧🔧🔧 thanks for watching 🙌🏼👊🏼🎥🎥🎥
@@andhotrodshop either way as a man were all jealous of stretched peterbuilt congrats its too sweet.
@@6.0king thanks man, I love it 👊🏼🙌🏼👍🏻 with a little spit and polish and few parts she will be awesome 🙌🏼👊🏼👍🏻🔧🔧🔧🔧🔧
you can put blocks between the 😊
@@keithsmith2952 blocks between the ???
@@andhotrodshop put blocks between the fame and the axle housing that way when the air dumbs out of the suspension it will be easier to get the drive shafts in
@@keithsmith2952 oh yeah now I get what you are saying 👊🏼👍🏻🙌🏼 yeah I ain’t going back in with it down 😂😂👍🏻🔧🔧🔧🔧 thanks for watching 👍🏻🙌🏼🎥🎥🎥