This is a short video about adding a needle valve to your Masterbuilt propane smoker. The valve can be purchased here: www.lowes.com/pd/Bayou-Classi...
You don't need the needle valve to control your flame, replace the regulator with a 0-5 PSI adjustable regulator, and NEVER use teflon tape as it will melt and cause a fire. The easy way is to unscrew the factory regulator from the factory hose and install the adjustable regulator in it's place. You will not believe the amount of flame control you will have. My factory regulator died a while back, and I swapped it out with an adjustable I already had. I wish I would have done this years ago. Good Luck!
I have a master built propane pro smoker even when the regulator dial is at the lowest setting the temperature still climbs to 380 degrees. By you changing to a 0-5 PSI adjustable regulator did you see that much better control of the flame? Thank You
Great video. Thanks for sharing! Was wondering what the lowest temperature you can get with this needle valve? I'm shooting for 150-170. Is that possible with this needle valve? Thanks!
got a what I thought was a nice one of the best smoker's. Bought it like 2 years ago. Just set it up. It would n only go. On high was like 290. Worked good for turkey day. So wanted to use it again yesterday. And could only get temp to 140 and no smoke. Anyone. Please help. How do I get temp t ok rise
As 40 year first class gas fitter. Please don’t follow any of this. It’s wrong in so many ways. From using Teflon tape on a compression fitting to changing the required 11” WC. Etc etc
![[ไฮไลต์] รอบชิงชนะเลิศ "เทนนิส พาณิภัค" ไทย vs จีน Guo Qing เทควันโดหญิง 49kg | โอลิมปิก 2024](http://i.ytimg.com/vi/xgvTIdE8j3U/mqdefault.jpg)
You don't need the needle valve to control your flame, replace the regulator with a 0-5 PSI adjustable regulator, and NEVER use teflon tape as it will melt and cause a fire. The easy way is to unscrew the factory regulator from the factory hose and install the adjustable regulator in it's place. You will not believe the amount of flame control you will have. My factory regulator died a while back, and I swapped it out with an adjustable I already had. I wish I would have done this years ago. Good Luck!
Thanks for watching!!
I have a master built propane pro smoker even when the regulator dial is at the lowest setting the temperature still climbs to 380 degrees. By you changing to a 0-5 PSI adjustable regulator did you see that much better control of the flame? Thank You
Nice tip!👍🏼
Thanks Brian!
Great video. Thanks for sharing! Was wondering what the lowest temperature you can get with this needle valve? I'm shooting for 150-170. Is that possible with this needle valve? Thanks!
Kris Waters really appreciate the comment! I no longer have this in my arsenal but I think it would go that low, yes.
Anybody know where else we can get this valve? I tried to find it at Lowe's :(
Timothy Huang looks very similar- Stanbroil 48 Inch 10 PSI High Pressure Propane Adjustable Regulator Valve Hose Assembly - QCC1 x 3/8" Flare Swivel Fitting www.amazon.com/dp/B01B5ULUX4/ref=cm_sw_r_cp_api_i_oyDnEbCTZRR3C
got a what I thought was a nice one of the best smoker's. Bought it like 2 years ago. Just set it up. It would n only go. On high was like 290. Worked good for turkey day. So wanted to use it again yesterday. And could only get temp to 140 and no smoke. Anyone. Please help. How do I get temp t ok rise
Thank you for watching! This smoker takes a lot of energy to produce heat. Cold weather and wind can have a real effect on it.
Of course this product is no longer available at Blowe’s
Amazon has mit
As 40 year first class gas fitter. Please don’t follow any of this. It’s wrong in so many ways. From using Teflon tape on a compression fitting to changing the required 11” WC. Etc etc