What are you all building today? Would love to hear if you made this or similar project! Here is the previous episode where we added a button to the OLED th-cam.com/video/ntRthoCrD6U/w-d-xo.html
Outstanding Eric thank you thank you thank you. I had been looking for some practical reason to get started with Arduino. Definitely using your project in one of my upcoming LiFePO4 Battery builds 👍👍👍.
Hey, Eric! I would like to build a small Oled infotainment for my project bike but electronic skills are extremely low. I would like to include volt meter (these older bikes had issues with stators so would like to keep my eye on it), time, temperature and compass. You seem to be very knowledgeable and I would really appreciate your help! Thank you!
Hi, I’ve really enjoyed watching these and learned a lot “I think”. I bought a 20 x 4 LCD Display with an I2C adapter on the back a couple of years ago and never really got it to do anything. Would it get hooked up basically the same way that you connected this display?
Off topic question: What cockpit are you building? About 10 years ago I started building a 737NG cockpit. I had to move and stopped. Still have some parts of it though :)
It was a Lear 45 until I needed the room for studio stuff and took it all apart. Now its just an insanely expensive backdrop. Whole playlist of videos on my channel.
Hi dear i wanted to build it for my motor bike for battery voltage readings but i am confused about its range because arduino uno or nano boards inputs voltage range is might be 12v and bike dynamo voltages could reach up to plus 15v d.c which could burn the micro controller so plz define measuring range of this circuit.
how can i build a system and connect 15 samples of MFC (microbial fuel cell)(it is almost like a battery, they produce electric) in same time for measuring current (low between 0mA to 3A) and voltage (between 0mV to 800 mV) continuously? I have an oscilloscope, if the system help me to get the reading continuously from the oscilloscope or independently measure them, both way is good for me. Please someone help me.
Voltage readings are accurate on 1s-3s batteries but when I try 4s, the reading is incorrect. Did I do something wrong? Even in your video 10.1v seems to be the maximum reading.
What are you all building today? Would love to hear if you made this or similar project! Here is the previous episode where we added a button to the OLED th-cam.com/video/ntRthoCrD6U/w-d-xo.html
I would like to meter and display voltage of 4 devices at once. Possible? Thanks.
Outstanding Eric thank you thank you thank you. I had been looking for some practical reason to get started with Arduino. Definitely using your project in one of my upcoming LiFePO4 Battery builds 👍👍👍.
Hey, Eric! I would like to build a small Oled infotainment for my project bike but electronic skills are extremely low. I would like to include volt meter (these older bikes had issues with stators so would like to keep my eye on it), time, temperature and compass. You seem to be very knowledgeable and I would really appreciate your help! Thank you!
Hi, I’ve really enjoyed watching these and learned a lot “I think”. I bought a 20 x 4 LCD Display with an I2C adapter on the back a couple of years ago and never really got it to do anything. Would it get hooked up basically the same way that you connected this display?
Same wiring, different library/code. Cheers
Off topic question: What cockpit are you building? About 10 years ago I started building a 737NG cockpit. I had to move and stopped. Still have some parts of it though :)
It was a Lear 45 until I needed the room for studio stuff and took it all apart. Now its just an insanely expensive backdrop. Whole playlist of videos on my channel.
I found it ;) Did you ever fly on VATSIM?
I did
Dear sir.,
I have 48 v ,960 amp battery,how to calculate voltage divider for sensing
Hi dear i wanted to build it for my motor bike for battery voltage readings but i am confused about its range because arduino uno or nano boards inputs voltage range is might be 12v and bike dynamo voltages could reach up to plus 15v d.c which could burn the micro controller so plz define measuring range of this circuit.
Cool, got my sub
how can i build a system and connect 15 samples of MFC (microbial fuel cell)(it is almost like a battery, they produce electric) in same time for measuring current (low between 0mA to 3A) and voltage (between 0mV to 800 mV) continuously? I have an oscilloscope, if the system help me to get the reading continuously from the oscilloscope or independently measure them, both way is good for me. Please someone help me.
Voltage readings are accurate on 1s-3s batteries but when I try 4s, the reading is incorrect. Did I do something wrong? Even in your video 10.1v seems to be the maximum reading.
same happened to me. do you have a solution?
Can I program it to read watts?
Sir, what is the voltage range? Thanks!
Box of bits a soldering iron and a breadboard.
Perfect night in...
You're the real "Happy"
Can it shows 18v
Where can i find the code??
In the description where it says "Full code found here:"
@@MkmeOrg oh thanks 😁 😂
Using code that went to Spaaaace¡
Oh my God I thought the beginning of this with the music was going to be another one of them videos where the people can't talk thank God it isn't
My ESP32 is getting panic, if im uploading this....
No ESP's in this video...
Nothing to it...lol... apart from years of coding experience