I thought mine was fine until I noticed the stiff joint moving backwards and that the hip wobbled alot like it may break off. Looked up your vid and fixed it. Seems fine now. Thank you you saved my bonecrusher !
You sir, deserve a medal for this video! I had the exact same problem with the SS Overload 3 years ago where the ratchet joint broke due to the high pressure of the articulation. Sadly, there was no solution. Even replacing the broken piece with a resin polymer was fruitless because the pressure of the screwed plate was so tight that broke any replacement piece that I put inside. However, what you did with your video is very useful not only for the MPM Bonecrusher, but also for all the others Transformers figures with tight ratchet joints. Thank you!
@@alfonsonationIt definitely will! I don’t wanna bust mine up right after I get it out of the box, so this is seriously a life-saver of a video. Thanks Alfonso you’re the best! ❄️🩵
I’ve gotta get me one of these. Also Alfonso what was that prime you were posing with bonecrusher in the beginning of the video? I don’t recognize the figure but it looks really good.
The issue is apparently widespread, but not every Bonecrusher may have tolerance issues. But this fix could be attempted on all copies. Same joints, same parts. Best of luck!
@@alfonsonationwhy in your country have so many complaints about those ratchet joint..? Here in Asia there are no complaints at all. All of our mpm are fine and perfect.
@@reginaorial7537 UK here. I'm not sure about any reports with Bonecrusher here, but mine does have a stiff ratchet joint so I'm going to open him up anyways. Also don't forget, Asia is where this mould was made, Takaratomy. Shipping will mess some things up
WHOA!!! Such a minor change can make a HUGE difference.
Thanks for watching!
@@alfonsonationJust found mine, and I went back to this tutorial immediately. Turns out mine came with both uncentered.
Dang
This should have more comments and likes
I will like
I thought mine was fine until I noticed the stiff joint moving backwards and that the hip wobbled alot like it may break off. Looked up your vid and fixed it. Seems fine now. Thank you you saved my bonecrusher !
Thanks for the lifesaver, been scared to transform him since I saw the news but after seeing this there’s hope, thank you
You sir, deserve a medal for this video! I had the exact same problem with the SS Overload 3 years ago where the ratchet joint broke due to the high pressure of the articulation. Sadly, there was no solution. Even replacing the broken piece with a resin polymer was fruitless because the pressure of the screwed plate was so tight that broke any replacement piece that I put inside. However, what you did with your video is very useful not only for the MPM Bonecrusher, but also for all the others Transformers figures with tight ratchet joints. Thank you!
I’m getting this for Christmas and I’m really hyped looks great
I’m so glad that you posted a tutorial of how to fix him; like I said before I’m getting mine soon, so I’m immediately going to do this lol! ☃️❄️
Hope it helps! Thanks for watching!
@@alfonsonationIt definitely will! I don’t wanna bust mine up right after I get it out of the box, so this is seriously a life-saver of a video. Thanks Alfonso you’re the best! ❄️🩵
A double Bonecrusher upload from Alfonso? Let’s freaking goooooooo!!!!!
THANK YOU! Mine's still a little iffy afterwards, but the clicks feel a lot more firm and stable. You're a toysaver!
thank god this popped into my recommended the day before my copy is delievered
He just saved our lives and our money
Just got my figure and this was the first thing I did, thank you very much!
Doing God's work Alfonso
Not gonna lie ive never heard you be this quiet or seen you be this careful. ❤❤😊
Looks like I’ll fixed bonecrusher so he can pose well thanks Alfonso
Thanks for taking the time to make this instructional video!👍🏻
Thank you for the helpful tip, Alfonso. I've ordered a bonecrusher, but it won't arrive til the 11th of this month.
Thank you for this.. it seem simple to do and will do. Thank you again, it's much appreciated
2 videos in 25 minutes? LETS GOOO
This might sound like a stupid question but what’s the size of the screw so I don’t accidentally dull out the screw while fixing my MPM Bonecrusher?
I’ve gotta get me one of these. Also Alfonso what was that prime you were posing with bonecrusher in the beginning of the video? I don’t recognize the figure but it looks really good.
Thank you for this tutorial. Can he hold his legs up now with this fix?
Thanks Alphonso!! Your a good man!!
On my copy they have a bit of play. I definitely open him up today and check the ratchets.
was there a problem?
@@muxaullo no, problem. It was just a little play in the ratchet.
@@wangeroogerque i fixed and still have a quiet huge play in ratchets😔
Idk I did it and they still have a bit of looseness to them. Probably gotta realign them again (and add more Kiki’s)
Can you do this fix while its still in vehicle mode?
I got mine, and the ratchet is broken. Is there any replacement or fix to this?
What screwdriver is it? None of mine fit.
I got this, and mine is missing a singular claw.
[IF] i get this toy is this like a need-to-do thing?
Anyone know what primer I should use when repainting a studio series?
Does this apply to all bonecrushers?
Not all MPM bonecrushers have this issue I assume but I suggest you open yours up and check just encase
The issue is apparently widespread, but not every Bonecrusher may have tolerance issues. But this fix could be attempted on all copies. Same joints, same parts. Best of luck!
@@alfonsonationwhy in your country have so many complaints about those ratchet joint..? Here in Asia there are no complaints at all. All of our mpm are fine and perfect.
@@reginaorial7537 UK here. I'm not sure about any reports with Bonecrusher here, but mine does have a stiff ratchet joint so I'm going to open him up anyways. Also don't forget, Asia is where this mould was made, Takaratomy. Shipping will mess some things up
@@thevoyagerv4499 the issue is a scam.
I love you video
5th
Dos!
First
I need this
All who think Alfonso should be a part of black history
👇
Good shit dude I was so scared of this issues but that’s so helpful thank you Alfonso !! 🤌🏽🤌🏽