I have a similar chair. When I go out on shorter trips during the day, I have it, a thermos with coffee and a sandwich in my backpack. Stays somewhere with a beautiful view and feel good before I roll on my Himalayan. Life is good!
Just found your channel and appreciate the content! I live in Colorado and purchased a Himalayan a few days ago. I'm new to adventure riding and super excited!
congrats on the new Himalayan! You're going to love it. I will up in Silverton in July on my bike and am excited to explore some of the Alpine Loop this year.
I am new rider and just purchased used 21' Hima w/ 2600 miles for $4,500. Just want to say I really appreciate your videos. I am loving the bike a little more each ride.
That's funny last week I literally did the same thing. Found to used Himmy with about 3000 miles on it, $4500. I saved myself about $3000 by letting somebody else break it in for me.
It was sunny and not too cold in Portland this last weekend, so I went out for a quick ride. It was only an hour or so, but it was comfortable and it felt good to get out. My bike is also a Himalayan, so thanks for the tips.
I too bought and install an iridium plug. This is cheap upgrade that makes a noticeable difference. I have a Thermarest chair which is made from a Thermarest sleeping pad and a couple of rods and some fabric. I'm sure it is not as comfortable as your chair but it is lighter and easier to pack. I used it for many years hiking and mountaineering.
I had the front end rattle issue and it was so so so annoying and frustrating because I couldn't fix it! The tape idea fixed it completely! Thankyou so much
and for OIS issue on phone... yeah I agree.. my Iphone and samsung both got trouble with my previous phone mount.. but Simtac brand mount.. is going good with it..
+1 to the QuadLock set-up with the anti-vibration add-on. So far, no issues with my iPhone 12 Pro. I recently added the weather-resistant wireless charging mount which is really nice. I want to come up with a better, more efficient solution for the EDC items I keep on the bike. The bag I'm using now takes up too much room inside the pannier. I'm thinking about adding Velcro panels inside and finding a tool roll or something that has Velcro on it that I can stick underneath the lid. Any ideas there? Thanks for the content!
Replace the two relays under your seat and get your throttle position sensor adjusted at the dealer. Since I did these two things, I've had zero stalls.
that issue with pannier bolt and metal peace missing is pretty uncommon... but yeah I faced it once.. got to know that RE doesn't sell it separately so I did visit a welder and for $2 buckes... he made the exact peace for me by cutting and polishing... also got the bolt from hardware store for $1 and cut the head... it has been a year and 15000kms since then... still no issue aftr that
Yours is the fourth instance of this happening that I've heard of and I'm not paying attention...I suspect this is a common problem and these bolts security should be regularly checked.
@@L--Z about being this issue common yet... I might disagree but yeah the bolt situation regular checkup has become my important ritual before getting on bike😂.....
Glad to hear! I was seriously thinking I was going to need to fabricate something...so was happy to see this worked out perfectly. I have the ADVRider forums to thank for the tip!
Wait what ?!? Your the guy form the Berkeley marathon !! What a legend ! Also love your bike videos I do trips with Himilayns in bolivia we have 8 of them amazing bikes !
I love your videos. Great practical tips. Question: You mount the drone controller on the gas tank, but how do you monitor the drone footage? Do you have the phone attached to the controller itself, or do you run an extension cable from the controller to your phone? Or am I missing something? It looks like a Mavic Mini controller like mine, but I have to have my phone attached to the controller. Thanks.
I just attached the entire controller w/phone to the gas tank via velcro tabs. So I have to look down to see. I suppose with a longer cable I could keep the phone up on the handlebars....but I typically never fly the drone for more than a few minutes at a time for a specific shot. I've had a quite a few issues controlling the little gen 1 mini. I suppose that's what I get for buying a used on on craigslist for $200. ¯\_(ツ)_/¯
I have the quadlock with the vibration dampener. Went on a 2000-km trip last year, and the camera on the iPhone 7 - that I (sadly) still use - is dead. No bueno.
ah man...well that's definitely a bummer. I haven't been brave enough to put my good phone on the quad lock yet. I am probably going to buy a new phone soon, so will probably downgrade my current phone to be my new travel phone. Then...even if the image stabilization does bonk out, it's not a huge deal.
@@On2Feet I rode with Quad-Lock Vibration Dampner for about 1000km, but conditions differed. I was using Pixel, not iPhone. I had it mounted (the base mount) right next to where the handlebar is mounted to the steering column (where it is bolted to the steering column). The dampener-mounted phone shook madly over rough patches of road, but the OIS of my mobile was still fine. Due to the terrain and conditions, I mostly stuck to low speed (4-4.5k rpm). I will go for longer 2000 - 3000km rides after the summer. Will keep you updated if you are interested. Please note that different devices may need different vibration frequencies or forces to show the same type of damage, so Pixel and iPhones may not be equivalent comparisons.
THANKS FOR THE GREAT TIPS! I NOTICED THAT YOU HAVE GAS TANK PADS ON TOP AND ON THE SIDES OF YOUR HIMMY. I WAS WONDERING IF IT CAME WITH THOSE PADS? AND IF NOT WHERE DID YOU BUY THEM? JOHN IN CO.
HEY- THANKS FOR THE QUICK REPLY- I JUST PUT IN AN ORDER FOR TWO SIDE PADS FROM AMAZON A FEW MINUTES AGO!! WHAT IS THE NEW IRIDIUM PLUG NUMBER, PLEASE- JOHN
If you're going to keep having bolts/screws rattle loose on the bike, consider adding a little Loctite Threadlocker Blue 242* when you re-tighten them. * NOTE * Make sure if anyone does this that you use Blue NOT Red! Blue can be cracked off again with a little effort, Red is a permanent hold.
Yeah...I try to use blue locktite on any bolt/screw that I can when it's metal/metal. For the well nuts on the windshield and other plastic or rubber connections, I usually don't.
How many weeks does Flagstaff have snow on the ground and/or sub-freezing weather? Do you ever trailer the bike down to Phoenix during that time of year?
Last year we had bad snow/ice until mid-february. Right now the roads are actually fine and temps aren't too bad, so I will probably do some riding very soon. If I want to go someplace warmer, Sedona is the easiest. It's only about 40 minutes away and is always 10-15 degrees warmer.
Yeah...There is a ethanol-free gas station in Flagstaff, but it's about 20 miles away. I do try to fill up there when I can though (It's also REALLY expensive here).
Most of your advices are perfect of any motorcycle rider. Thank you!
I have a similar chair. When I go out on shorter trips during the day, I have it, a thermos with coffee and a sandwich in my backpack. Stays somewhere with a beautiful view and feel good before I roll on my Himalayan. Life is good!
Just found your channel and appreciate the content! I live in Colorado and purchased a Himalayan a few days ago. I'm new to adventure riding and super excited!
congrats on the new Himalayan! You're going to love it. I will up in Silverton in July on my bike and am excited to explore some of the Alpine Loop this year.
I am new rider and just purchased used 21' Hima w/ 2600 miles for $4,500. Just want to say I really appreciate your videos. I am loving the bike a little more each ride.
Awesome! That's a great deal on the bike and I'm sure you're going to really enjoy it. I've had a blast on my himmie.
That's funny last week I literally did the same thing. Found to used Himmy with about 3000 miles on it, $4500. I saved myself about $3000 by letting somebody else break it in for me.
@@LordHolley 🤙nICE !
Looks stunning! An Owner of RE Himalayan 2020 BS-6 in India 🇮🇳
It was sunny and not too cold in Portland this last weekend, so I went out for a quick ride. It was only an hour or so, but it was comfortable and it felt good to get out. My bike is also a Himalayan, so thanks for the tips.
I too bought and install an iridium plug. This is cheap upgrade that makes a noticeable difference. I have a Thermarest chair which is made from a Thermarest sleeping pad and a couple of rods and some fabric. I'm sure it is not as comfortable as your chair but it is lighter and easier to pack. I used it for many years hiking and mountaineering.
I had the front end rattle issue and it was so so so annoying and frustrating because I couldn't fix it! The tape idea fixed it completely! Thankyou so much
Where did you source the tool tubes?
That is a very nice looking color scheme on your bike.
Great video as usual! I’ll be set when I get my Himalayan!
and for OIS issue on phone... yeah I agree.. my Iphone and samsung both got trouble with my previous phone mount.. but Simtac brand mount.. is going good with it..
Thanks for this video. You are a huge help to us
Perhaps using epoxy or duct tape on those pannier pannier fittings would keep them in place if the wheel came off again?
Excellent video. Thank you!
+1 to the QuadLock set-up with the anti-vibration add-on. So far, no issues with my iPhone 12 Pro. I recently added the weather-resistant wireless charging mount which is really nice. I want to come up with a better, more efficient solution for the EDC items I keep on the bike. The bag I'm using now takes up too much room inside the pannier. I'm thinking about adding Velcro panels inside and finding a tool roll or something that has Velcro on it that I can stick underneath the lid. Any ideas there? Thanks for the content!
Check if the wireless charger is legal to use? Somewhere in YT I saw it was illegal
Love the velcro idea for the drone controller! If you want to remove the velcro peace that's attached to the bike, will that damage the bike?
I don't think it will damage. I will probably leave some sticky residue that can come off easily with WD40
I just changed to the iridium plug to try to fix my cold-stalling issues. It didn't help that, but the bike does run noticeably better.
Replace the two relays under your seat and get your throttle position sensor adjusted at the dealer. Since I did these two things, I've had zero stalls.
Great video. However, I would say that changing your spark plug every year is completely overkill. Those iridium tips are designed for 100,000 miles.
that issue with pannier bolt and metal peace missing is pretty uncommon... but yeah I faced it once.. got to know that RE doesn't sell it separately so I did visit a welder and for $2 buckes... he made the exact peace for me by cutting and polishing... also got the bolt from hardware store for $1 and cut the head... it has been a year and 15000kms since then... still no issue aftr that
Yours is the fourth instance of this happening that I've heard of and I'm not paying attention...I suspect this is a common problem and these bolts security should be regularly checked.
@@L--Z about being this issue common yet... I might disagree but yeah the bolt situation regular checkup has become my important ritual before getting on bike😂.....
Get a machine shop to make you a new pannier part
Touratech Pannier hardware tip is priceless.
Glad to hear! I was seriously thinking I was going to need to fabricate something...so was happy to see this worked out perfectly. I have the ADVRider forums to thank for the tip!
Wait what ?!? Your the guy form the Berkeley marathon !! What a legend ! Also love your bike videos I do trips with Himilayns in bolivia we have 8 of them amazing bikes !
I cannot believe you could hear your headlight shroud rattling. Well done and enjoy your videos my fellow Himalayan friend.
The headlight shroud vibration is a well documented issue.
Nice job. Thanks
Hey! Thanks for the video. Nice tips. Cheers!
No problem!
Has your front end broke off yet?
Great tips!
Subscribed!
Where can i find those fuel tubes?
I love your videos. Great practical tips. Question: You mount the drone controller on the gas tank, but how do you monitor the drone footage? Do you have the phone attached to the controller itself, or do you run an extension cable from the controller to your phone? Or am I missing something? It looks like a Mavic Mini controller like mine, but I have to have my phone attached to the controller. Thanks.
I just attached the entire controller w/phone to the gas tank via velcro tabs. So I have to look down to see. I suppose with a longer cable I could keep the phone up on the handlebars....but I typically never fly the drone for more than a few minutes at a time for a specific shot. I've had a quite a few issues controlling the little gen 1 mini. I suppose that's what I get for buying a used on on craigslist for $200. ¯\_(ツ)_/¯
Hey what have you used on your fuel tank
I am really interested to know, if possible please do send an amazon link
I used these:
Tank Pad (Top): amzn.to/3zmVjI3
Tank Pads (Side): www.desertcart.ae/products/157859770-autologue-design-re-himalayan-tank-pads
thank you sir.
where to buy those two tubes ?
thetooltube.com
I have the quadlock with the vibration dampener. Went on a 2000-km trip last year, and the camera on the iPhone 7 - that I (sadly) still use - is dead. No bueno.
ah man...well that's definitely a bummer. I haven't been brave enough to put my good phone on the quad lock yet. I am probably going to buy a new phone soon, so will probably downgrade my current phone to be my new travel phone. Then...even if the image stabilization does bonk out, it's not a huge deal.
@@On2Feet yea I think that's my plan as well. I'm getting a new phone soon and the iphone 7 stays on the quadlock ahaha
@@On2Feet I rode with Quad-Lock Vibration Dampner for about 1000km, but conditions differed. I was using Pixel, not iPhone. I had it mounted (the base mount) right next to where the handlebar is mounted to the steering column (where it is bolted to the steering column). The dampener-mounted phone shook madly over rough patches of road, but the OIS of my mobile was still fine. Due to the terrain and conditions, I mostly stuck to low speed (4-4.5k rpm). I will go for longer 2000 - 3000km rides after the summer. Will keep you updated if you are interested. Please note that different devices may need different vibration frequencies or forces to show the same type of damage, so Pixel and iPhones may not be equivalent comparisons.
Hi, and thank you for your video. Where have you bough those round toolbox? Looks great 🤗
just bought them from tooltube website. www.thetooltube.com/ToolTube.html
THANKS FOR THE GREAT TIPS! I NOTICED THAT YOU HAVE GAS TANK PADS ON TOP AND ON THE SIDES OF YOUR HIMMY. I WAS WONDERING IF IT CAME WITH THOSE PADS? AND IF NOT WHERE DID YOU BUY THEM? JOHN IN CO.
The tank pads were purchased separately. I think I put the links in for where I got them in Part 1 of my Hacks video. I think I got them on amazon
HEY- THANKS FOR THE QUICK REPLY- I JUST PUT IN AN ORDER FOR TWO SIDE PADS FROM AMAZON A FEW MINUTES AGO!! WHAT IS THE NEW IRIDIUM PLUG NUMBER, PLEASE- JOHN
If you're going to keep having bolts/screws rattle loose on the bike, consider adding a little Loctite Threadlocker Blue 242* when you re-tighten them.
* NOTE * Make sure if anyone does this that you use Blue NOT Red! Blue can be cracked off again with a little effort, Red is a permanent hold.
Yeah...I try to use blue locktite on any bolt/screw that I can when it's metal/metal. For the well nuts on the windshield and other plastic or rubber connections, I usually don't.
How many weeks does Flagstaff have snow on the ground and/or sub-freezing weather? Do you ever trailer the bike down to Phoenix during that time of year?
Last year we had bad snow/ice until mid-february. Right now the roads are actually fine and temps aren't too bad, so I will probably do some riding very soon. If I want to go someplace warmer, Sedona is the easiest. It's only about 40 minutes away and is always 10-15 degrees warmer.
Did you use the standard size Tool Tube? Or the Mega? Would the Mega fit (1" bigger in diameter)?
I used the regular, but I suspect the mega would also fit just fine. It's the same length right?
@@On2Feet Same length, just wider diameter.
Stabilizer the modern day snakeoil.
It might work better with non ethanol fuel?
Non-ethanol fuel has no need for stabilizers. Ethanol attracts water and causes rust which is why "stabilizers" became a thing
Yeah...There is a ethanol-free gas station in Flagstaff, but it's about 20 miles away. I do try to fill up there when I can though (It's also REALLY expensive here).
🤩👍
👍 👍 👍