I used to work in the QC and safety lab for one of the largest canners in the world (Del Monte). If you would like I can share my knowledge with you about how to inspect, test and verify your canning seals and explain what the USDA and FDA wants to see in a seal. I can tell you about how to cut and inspect the seals. Uniformity is very key.
Speed controllers that are suggested below may work, although while I was watching this I was wondering why the motor was spinning so fast. The motor does not need to spin fast. What needs to happen is that motor get geared down for torque and spin at a moderate speed maybe 30-60 rpm. It's like they tried to compensate for not having torque by making it go really fast so when you hit it with the stationary dies it doesn't slow it down too much.
Prepping for a scenario in which electricity is available, in some form. If the prep is for THEOTWAWKI I think non-electric is preferable. 'Course there is the issue of running out of cans...
Isn’t it strange that China makes canners, yet average Chinese families don’t know anything about canning food at home? When Chinese talking about “canning,” it’s whipping a cane on someone’s bare ass.
I may be late to the comments, however, noticing you are doing this on a trestle table. Do you always can your goods on a trestle table? That slight rocking when you engage the rollers may be causing the liquid inside the can to shift up and out of the can whilst it spins? Just a thought.. Might be worthwhile trying on a solid work bench or something? :) Good work nonetheless.
thanks for video man as i saw one fer sale ....An old boy with a lathe can make wheels fer it or buy an old or bench top lathe fer the tool shed n do it your self if needed. that thing needs motor mounted on the side and a 2:1 or 3:1 belt / gear reduction i mean look at speed and torque of induction motors are terrible on startup if using lower parts count direct drive a brushed motor be better i think .may be hack apart the 50 dollar harbor freight drill press fer parts and use to mod if i buy one ;}
icepipay Dimatera we’ll jar pressure canning is my Preference don’t be discouraged if you’ve never caned buy this video. I’ve never seen anything like it in my life it’s way more work than just canning with jars and safer I believe. I don’t know any canning that last 10 years other than MRE Linda’s pantry is my go to canning info👍🏼
Great video and advice, thanks!
I used to work in the QC and safety lab for one of the largest canners in the world (Del Monte). If you would like I can share my knowledge with you about how to inspect, test and verify your canning seals and explain what the USDA and FDA wants to see in a seal. I can tell you about how to cut and inspect the seals. Uniformity is very key.
this would be good info to have. can you make a video?
Excuse me sir where do you buy your cans thank you
May I suggest an AC motor speed controller? AKA router speed controller. Variations are priced from $10 to $200. Ebay, Amazon, etc.
Speed controllers that are suggested below may work, although while I was watching this I was wondering why the motor was spinning so fast. The motor does not need to spin fast. What needs to happen is that motor get geared down for torque and spin at a moderate speed maybe 30-60 rpm.
It's like they tried to compensate for not having torque by making it go really fast so when you hit it with the stationary dies it doesn't slow it down too much.
where do u get food grade cans?
Where do you buy your cans at?
Prepping for a scenario in which electricity is available, in some form. If the prep is for THEOTWAWKI I think non-electric is preferable. 'Course there is the issue of running out of cans...
Isn’t it strange that China makes canners, yet average Chinese families don’t know anything about canning food at home?
When Chinese talking about “canning,” it’s whipping a cane on someone’s bare ass.
lol good one
How can i tell if a semi auto canner is certified?
For a little over $100 you can buy a variable frequency drive that will allow you to control the speed of the motor without damaging it.
Link?
Right need a link?
can you use any smaller cans at all or is it one size per rmachine
The start current on motors can be 7 times normal run current. Need inverter that can take the start current.
ppl talk too much in videos now a days
get straight to the point dude
Huge problem in youtube. Tired of these 10+ minute videos with 99% talk and 1% showing
Where do you buy the materials?
do you know where i can buy a american made can sealer? not sure what sites online sell them, cant find any, to my surprise.
Do you sell anything that you can? Do you know of any home canners that do?
I may be late to the comments, however, noticing you are doing this on a trestle table. Do you always can your goods on a trestle table? That slight rocking when you engage the rollers may be causing the liquid inside the can to shift up and out of the can whilst it spins? Just a thought.. Might be worthwhile trying on a solid work bench or something? :) Good work nonetheless.
NICE VIDEO
COVER YOUR FOOD SO THE METAL WONT FLY INTO IT , LOL
Excellent 👍👍👍👍 lots of things to learn...
I think after watching you flounder, I'll be leaving that task to the professionals.
Just out of curiosity, what were you canning?
Salmon
Where can I buy those cans?
th-cam.com/video/yx7ezXrf7GI/w-d-xo.html
Link to buy it?
+Jason Jobe There is a link to the article in the note, and the bubble in the video.
th-cam.com/video/yx7ezXrf7GI/w-d-xo.html
I think this video is about what you CAN or CAN't do!
Martin Gudmundsen Bahahahahahah😂😂😂😂
thanks for video man as i saw one fer sale ....An old boy with a lathe can make wheels fer it or buy an old or bench top lathe fer the tool shed n do it your self if needed. that thing needs motor mounted on the side and a 2:1 or 3:1 belt / gear reduction i mean look at speed and torque of induction motors are terrible on startup if using lower parts count direct drive a brushed motor be better i think .may be hack apart the 50 dollar harbor freight drill press fer parts and use to mod if i buy one ;}
how much price your Can Sealers machine?
th-cam.com/video/yx7ezXrf7GI/w-d-xo.html
Am I buy this cans online?
amazon ebay
Good video
i think id go for freeze drying than canning after watching this.
icepipay Dimatera we’ll jar pressure canning is my Preference don’t be discouraged if you’ve never caned buy this video. I’ve never seen anything like it in my life it’s way more work than just canning with jars and safer I believe. I don’t know any canning that last 10 years other than MRE Linda’s pantry is my go to canning info👍🏼
Looks like you will get it , best of luck .
Guess it's time to buy Made in USA products. Lol
cool
USA 110 V, China 230 V ? Hahahahaha
Put less in the can😀
I might be wrong but i believe you want as much food in them as possibel. To keep from air filling the void