Good day! When assembling the model, I did not like the fit of the parts! But painting and weathering hid all the defects! The model turned out to be very excellent! Excellent channel! I like the approach to finishing and painting the model, as well as weathering without using oil dots! Thank you!
As for the oil dots, I don't think they're a very effective technique. Well, however, it's not a big deal as it's just a matter of people's likes and dislikes. I'm glad you enjoyed the video. Thanks for the comments.🍺🍺🍺
Good evening my friend, that was a absolutely outstanding build and westhering finish, congratulations on a job very well done, bext regards from Australia, Les
I didn't do anything special. There will always be brush marks, but if you paint 2-3 times, the marks will disappear. Also, it seems that some colors are less likely to have brush marks. Either way, it's not a big deal considering the hard work that goes into masking. Thank you for your comment.🍺🍺🍺
Hi, Your videos are very well edited and very entertaining to watch. A couple of questions: 1. What kind of thread do you use to fasten stowage? Is it flexible or not? What type is it? 2. How do you hang bags, water canteens etc. on the wires? On the back side of bags, water canteens etc. you simply put a hook shaped thin metal foil? Thank you Looking forward to the next videos. :)
In Japan, there is a tool for marking architecture called a charcoal pot, and the thread used in that is used in the thread. You can see it at the link below. www.amazon.co.jp/TJM-Design-PS-ITOSS-Tajima-Perfect-Inkpot-Ultra-Fine-Thread-30m/dp/B00LWIF22A?pd_rd_w=oaUnn&content-id=amzn1.sym.f6581591-7b04-4020-b58d-ea57e9183649&pf_rd_p=f6581591-7b04-4020-b58d-ea57e918 3649&pf_rd_r=DB16RHHHZZS56Y63JYSN&pd_rd_wg=xZfhN&pd_rd_r=04d6741b-efe8-4e36-918a-412e406da0a9&pd_rd_i=B00LWIF22A&psc=1&ref_=pd_bap_d_grid_ rp_0_1_ec_pr_pd_yo_rr_rp_d_sccl_1_6_i&language=en_US
Bags and other items are hung by attaching a hook to the back of the bag using a 0.1mm copper plate. It's just as explained in the video. Did you understand? Thank you for your comment.🍺🍺🍺
Wow - if this the quality of modelling on your second channel, what must it be like on Scale Model Club 1 ??? 😊😊😊 Seriously, lovely work - some great textures here. You spray very close - what is your PSI and thinner ratios?
The Scale Model Club 1 is explained in the description section of the linked page below. Please take a look. th-cam.com/video/U9dNNsIYfPo/w-d-xo.html Are you referring to the air pressure of the airbrush? I use a range of 0.2 to 0.1Mpa. The dilution rate also changes depending on the season. I spray it each time and adjust it to my preferred concentration while observing the results.🍺🍺🍺
Hello, I am very impressed by your excellent work ! I would have a few questions, when you paint with brushes for the basic painting, you use tamiya paint, with what do you dilute it and at what percentage ? Also with the airbrush, with what do you dilute it and at what percentage ? Thank you very much, full of strength from France !
I use Tamiya's acrylic paint solvent X-20A. I adjust the dilution ratio to find the best concentration each time I paint with a brush or airbrush. Because it changes depending on the season. I haven't determined the exact percentage.🥝🫐🍎🍋
I dilute the oil painting considerably with enamel solvent and pinwash it. I apply a thin layer of enamel solvent to the area I'm going to pin wash first. This makes the oil paint flow very well all the way to the edges. It is difficult to adjust the dilution concentration, etc., but trial and error is essential. Give it a try.🍔🍟🥤
also...in terms of illogic feature..but 'looks cool': Too many hatches are OPEN....sure, nice for a desert breeze, catching some rays ...BUT if you are expecting a surprise assault from the enemy ANY moment, then jumping in the tank and firing off...AFTER you have to shut all those hatches = loosing time = loosing life.
![SOVIET MEDIUM TANK T-28 - Part 2 - 1/35 ZVEZDA - [ Painting - weathering ]](http://i.ytimg.com/vi/WwNA3v6ZEzM/mqdefault.jpg)
![SOVIET MEDIUM TANK T-28 - Part 2 - 1/35 ZVEZDA - [ Painting - weathering ]](/img/tr.png)
![PANZER IV fighting in winter - Part 2 - 1/35 TAMIYA - Tank Model - [ Painting weathering ]](http://i.ytimg.com/vi/HAxj2OsAiH8/mqdefault.jpg)
![Sd.Kfz.232 AFRICA-CORPS - Part 2 - 1/35 TAMIYA - Tank Model - [ Painting weathering ]](http://i.ytimg.com/vi/IDRKHh3mAuE/mqdefault.jpg)
![ร้อยพ่อพันแม่ - WanMai [Official MV]](http://i.ytimg.com/vi/XY2pNYASEbg/mqdefault.jpg)
![M4A3 Sherman fighting in the Pacific front. - Part 2 - 1/35 Tamiya - Tank Model - [ weathering ]](/img/n.gif)
The fact that you hand-painted the camouflage really adds to the authenticity.
I'm glad if you think that way. Thank you for your comment.🍺🍺🍺
Maestro, exelente segunda parte,un modelo sencillo lo haces ver espectacular, gran trabajo felicitaciones, saludos como siempre desde México 🎉🎉🎉🎉
Me alegro que lo hayas disfrutado. Gracias por tu comentario.🍺🍺🍺
Beautiful work, as usual.
Thank you.🍰🧁🫖☕
Love the painting process! But I wasn't expecting it was going to be extra detail 😅
Great job my friend!
I'm glad you enjoyed it. Thank you for your comment.🍦🍦🍦
Beautifully implemented. The effort was worth it 👍
I hope you enjoy it and thanks for your comments.🍦🍦🍦
Beautiful work yet again, I like all the layers of mud built up on this project, it gives it a lot of character.
I'm glad you liked it. Thank you for your comment.🍦🍦🍦
Impressive as ever! Well done and have a great weekend!
It's been a while. Thank you for your comment.🥝🍊🫐🍎
Nice work. I really like the color.
Thank you.🍺🍺🍺
Outstanding work. Keep 'em coming.
Thank you.🍰🥧🍪🧁🫖☕☕
Good day! When assembling the model, I did not like the fit of the parts! But painting and weathering hid all the defects! The model turned out to be very excellent! Excellent channel! I like the approach to finishing and painting the model, as well as weathering without using oil dots! Thank you!
As for the oil dots, I don't think they're a very effective technique. Well, however, it's not a big deal as it's just a matter of people's likes and dislikes. I'm glad you enjoyed the video. Thanks for the comments.🍺🍺🍺
Really cool weathering. 🖌
Thank you.🍫🍬🍭
What an amazing built💯
Thank you.🍷🍷🍷
Як завжди прекрасна робота,просто супер!
дякую.🍎🍏🍎
とにかく楽しそうです♪
私筆塗りしかやったことがないので、スプレー塗装に憧れます。
この動画はレベルが高すぎて全てが勉強になります。
それこそ塗装教室を開いて欲しいと思いました。
世の中には達人がいるものですね。
達人などと呼ばれるのはまだまだ10年早いと思いますよ。でもプラモ作りは楽しいですし、奥が深いです。
教室は開けませんがこのチャンネんるが少しでもお役に立てるなら幸いです。コメントありがとう。🍦🍦🍦
Amazing, I want to be that good.
Always enjoy your builds.
I hope you enjoy it and thanks for your comments.🥝🫐🍎🍊🍈
Amazing work!!!
Thank you.🍺🍺🍺
This work is you are best! I liked it most of all! Gordges work.
Thank you.🍺🍺🍺
Good evening my friend, that was a absolutely outstanding build and westhering finish, congratulations on a job very well done, bext regards from Australia, Les
Thanks for commenting from Australia, I'm glad you enjoyed it.🍎🍎🍏
🍎🍏🍎
You are an artist!
Thank you.👍🍪🍰🧁🫖☕☕
お疲れ様でした。リベットまみれの車両、情報量多くて良いですね～。ドライブラシのやり甲斐ありそうです。丁度下を派手目に汚そうと思ってましたので、参考になりました。
ドライブラシは本当に優れたテクニックです。最初に思いついた人は本当に天才だと思ったりします。パステルパウダーでの汚し、参考になったでしょうか。市販のピグメントは量に対して異様に値段が高いです。ですが自家製パステルパウダーだと100円均一物のパステルで事足ります。しかし欠点はどうしても市販のピグメントと比べると粒子が荒くなってしまいます。その欠点を逆手に取ったテクニックです。いつもコメントありがとうございます。🍍🍍🍍
当時だと日本ではシェパード・ペイン氏あたりがドライブラシテクニック紹介の嚆矢ですかね。バーリンデンとかも凄かったですし、流行りましたよね～。
古いテクニックという方がおられますが、古くても良いものは良いですね。簡単だし（笑）。
ちなみに手前味噌ですが、私はアクリル塗料とベビーパウダーでピグメント自作してます。簡単ですし、色を朝食すれば無限にできるので重宝してます。
制作方法は動画にしてありますので、ご参考にでもなれば幸いです。
@@panzer-meister ありがとうございます。参考にさせていただきます。🍺🍺🍺
Awesome as usual
Thank you.🍰🧁🥧☕🫖
How awesome 👍👍
Thank you.🍎🍏🍎
Eccellente!!!😮😊
Grazie.🍝🍷🍷🍷
Veramente bello 😮
Grazie.👍🍝🍝🍷
first
also a very impressive model
First commenter. Thank you for your quick response.🍺🍺🍺
Again fantastic work! I would love to know how you thin down those tamiya acrylics for hand painting the camo. Keep it going!!
I didn't do anything special. There will always be brush marks, but if you paint 2-3 times, the marks will disappear. Also, it seems that some colors are less likely to have brush marks. Either way, it's not a big deal considering the hard work that goes into masking. Thank you for your comment.🍺🍺🍺
Hi,
Your videos are very well edited and very entertaining to watch.
A couple of questions:
1. What kind of thread do you use to fasten stowage? Is it flexible or not? What type is it?
2. How do you hang bags, water canteens etc. on the wires? On the back side of bags, water canteens etc. you simply put a hook shaped thin metal foil?
Thank you
Looking forward to the next videos. :)
In Japan, there is a tool for marking architecture called a charcoal pot, and the thread used in that is used in the thread. You can see it at the link below.
www.amazon.co.jp/TJM-Design-PS-ITOSS-Tajima-Perfect-Inkpot-Ultra-Fine-Thread-30m/dp/B00LWIF22A?pd_rd_w=oaUnn&content-id=amzn1.sym.f6581591-7b04-4020-b58d-ea57e9183649&pf_rd_p=f6581591-7b04-4020-b58d-ea57e918 3649&pf_rd_r=DB16RHHHZZS56Y63JYSN&pd_rd_wg=xZfhN&pd_rd_r=04d6741b-efe8-4e36-918a-412e406da0a9&pd_rd_i=B00LWIF22A&psc=1&ref_=pd_bap_d_grid_ rp_0_1_ec_pr_pd_yo_rr_rp_d_sccl_1_6_i&language=en_US
Bags and other items are hung by attaching a hook to the back of the bag using a 0.1mm copper plate. It's just as explained in the video. Did you understand? Thank you for your comment.🍺🍺🍺
Thank you for the answers and the link to the product as well. ;)
Wow - if this the quality of modelling on your second channel, what must it be like on Scale Model Club 1 ??? 😊😊😊
Seriously, lovely work - some great textures here. You spray very close - what is your PSI and thinner ratios?
The Scale Model Club 1 is explained in the description section of the linked page below. Please take a look.
th-cam.com/video/U9dNNsIYfPo/w-d-xo.html
Are you referring to the air pressure of the airbrush? I use a range of 0.2 to 0.1Mpa.
The dilution rate also changes depending on the season. I spray it each time and adjust it to my preferred concentration while observing the results.🍺🍺🍺
Hello, I am very impressed by your excellent work !
I would have a few questions, when you paint with brushes for the basic painting, you use tamiya paint, with what do you dilute it and at what percentage ?
Also with the airbrush, with what do you dilute it and at what percentage ?
Thank you very much, full of strength from France !
I use Tamiya's acrylic paint solvent X-20A. I adjust the dilution ratio to find the best concentration each time I paint with a brush or airbrush. Because it changes depending on the season. I haven't determined the exact percentage.🥝🫐🍎🍋
C O O O L !!!!!
👍🍺🍺🍺
I might be wrong but aren't the Regt insignia upside down? Otherwise fantastic as usual.
This is stated in the video description section. Please take a look....🍍🍍🍍
Hi smc2 love your work absolutely beautiful do u have a new model in mind all ready and what will it be can't wait 🎉
The next thing I will post is the autumn version of TAMIYA 1/35 JAGDPANZER IV / 70 (V) LANG. Stay tuned. Thanks for your comments.🍫🍬🍭
ARIGATO GOZAIMASU, Thanks 😊❤😊🎉😊😊
Thank you for your comment in Japanese.🍺🍺🍺
Support👍👍👍💪
Thank you.👍🍰🍩🥧☕🫖
@@smc-2May I ask will you shoot some videos about figure painting ?
@@ringo123rrr Sorry, there are no plans at the moment.🍦🍦🍦
cool:)
Thank you.👍🍺🍺🍺
Another great one. How do you get the pin wash to flow so freely? I can't get the same consistency when I try - just doesn't flow properly.
I dilute the oil painting considerably with enamel solvent and pinwash it. I apply a thin layer of enamel solvent to the area I'm going to pin wash first. This makes the oil paint flow very well all the way to the edges. It is difficult to adjust the dilution concentration, etc., but trial and error is essential. Give it a try.🍔🍟🥤
Do you have any plans to do japanese tanks, like Chi-ha or maybe even modern type 74?
I'm sorry but there are no such plans at the moment.🍺🍺🍺
🤩🤩
👍🍫🍬🍭
Отличная работа!Только,как мне кажется,номер части должен быть 86,а не 98
Это объясняется на английском языке в разделе описания видео. Как вы заметили, я допустил две ошибки в декали. Спасибо за ваш комментарий.🍺🍺🍺
@@smc-2 Не посмотрел описание.Прошу прощения за мой недосмотр.Пойду искать 2-ю ошибку)
Как всегда, отличная работа 👍
Спасибо.🍎🍏🍎
Great, but stowage and towing cable are blocking side hatches.
That's a big problem. I'm in trouble. What should I do?🍄🍄🍄
@@smc-2 Just give the model to me, and you're safe.
@@janik1691 Okay. Then, if you'd like, please come to Japan to pick it up. I'll give it to you for free. You're lucky.🍬🍭🍬
also...in terms of illogic feature..but 'looks cool': Too many hatches are OPEN....sure, nice for a desert breeze, catching some rays ...BUT if you are expecting a surprise assault from the enemy ANY moment, then jumping in the tank and firing off...AFTER you have to shut all those hatches = loosing time = loosing life.
👍
🍖🥩🥗🍷🍷🍷
@@smc-2 ?
@@Рекидз12-ъ7н 👍🍺🍺🍺
@@smc-2 🤨
06:30 86 not 98, DAMN!
It's explained in the video description. Please see.🍬🍬🍬
🤝🎥🛠️👍
👍🍰🧁🍪🫖☕
nice work, but one of your brigade markings is upside down
The mistake in the decal is explained in the video description. Please take a look. Thank you for your comment.🍎🍏🍎
@@smc-2 ..just ripp it off and get some other desert rats decal from another kit.
5 minutes work...eternal bliss.
amazing until the dry brushing, dry brushing for me takes away the realism it looks like frost.
Thank you for your comment.🍎🍏🍎
水性アクリルの方が実車に近い
実車をご存知なんですか？すごいですね！！！コメントありがとう。🍦🍦🍦
Not bad , a few minor boo boos but all n all a good job .
Thank you for your comment.🍦🍦🍦
Wrong color, you confused olive green with black
Thank you for your comment.🍌🍌🍌