Trying to RESTORE a Dirty HUGE Vintage West German 1960s GRUNDIG Bookshelf RADIO
ฝัง
- เผยแพร่เมื่อ 23 เม.ย. 2022
- Heavy old filthy vintage 1960s German radio (Grundig Type RF150) purchased faulty from eBay. Can it be restored to work again the way it did 50+ years ago. Let's find out.
Big thanks to Marc for telling me about this beautiful radio.
Merch is here!!!!! www.puddlt.com/my-mate-vince
If you would like to support these videos, please click here / mymatevince
If you have an interesting 'non returnable' item for a 'trying to fix' video then my PO box is as follows. Please only use if you are from the UK and using Royal Mail.
PO Box 2597
WATFORD
WD18 1HT
UK
Remember that this is just for entertainment and I am not an expert in these repairs. The processes in the video may not be the best way, the correct way or the safest way to fix these things. I do love fault finding and trying to fix broken things, so I hope that comes across in this 'Trying to FIX' series. Many thanks, Vince. - แนวปฏิบัติและการใช้ชีวิต
![fellow fellow - Proud [OFFICIAL MV]](http://i.ytimg.com/vi/9uZF7BlUQPE/mqdefault.jpg)
What a lovely looking radio! Good to see your workbench/studio all set up too! Great video as always, Vince 👍
Nice one Steve 👍👌
Hey StezStix Fix, looking forward to your next masterpiece..
hello dave 😍😍😍
Just a suggestion for future radios, you could use an FM transmitter; the kind you might have for a car, and then use that to play some roylaty free music to demonstrate the product, without risk of issues with copyright.
or better yet one of the pll quartz synthesized 2w ones from china that are much better than the crappy car ones and have more better range. Like the kind youd use for a drive-in church or movie
They go from 88mhz all the way up to 110mhz and have dual low and high power settings so much more handy too for testing and they run off 12v dc
I have one of those transmitters for my AM radio in my 1965 Cadillac so I can use my I-Pod to play through the original car radio.
Difficult not to distract from the originality but I’d instal a Buck converter to drop the supply on those lamps and cut the diffusers off the bulbs if you want to use filaments- you might even find the diffusers are over the top of the bulb glass. Of course, leds and a dropper resistor would enhance it… Great vid, Vince.
What a gorgeous piece. After all those years I can't believe that something more vital wasn't broken like the transformer, any of the caps, fuses on the board., even an old dry trace what just wasn't making a good enough contact. Speaks for that old German quality.
many blame capacitors for pretty much any and every fault, in my experience, theyre not , especially in that sort of age equipment,
That's what I was thinking. With all the rust and corrosion it must have spent a lot of time in a humid environment, but when the electronics are well-made that doesn't matter much, apparently.
They definitely don't build them like this any more! Great video Vince, nice to see such a beautiful looking unit come to life again 😀
Thanks Phil, really is beautiful. I wish I had more space to display these type of things 👍👍👍
The particle board construction just signals the direction Grundig, along with other manufacturers were taking in trying to be cost competitive with those clever Japanese. My grandfather had one of those old tabletop units from the late 40s in a lustrous REAL blond wood cabinet. The push-buttons and 'magic eye' intrigued my 5 year old self to no end! He was a certified Westinghouse electronic repair man and so, that radio was always in tip-top running condition!
The switchset is sticky and as long as you got a range switch down the Off switch will not stay off. The "AUS" (Off) switch kills power *and* releases the frequency switches. Usually a bit run down grease on the switches release rail.
The lamp holders can be pulled up and the bulbs removed without front removal. They are just pushed onto the sheetmetal latches.
"Straight out of a Michael Caine film.... " Brilliant. I miss radios like this if I am honest. Today's stuff is mostly plastic rubbish.
OK, I agree, but for me, the sound of DAB+ is also great.
Hello there Vince and greetings from germany!
For testing FM you could get one of these simple FM Transmitters and send royalty free music on different FM frequencies. Most times these devices can be plugged into whatever free headphone jack. Its also good for testing how accurate the pointer might be... e.g. sending music via 94 MHz and tune the radio to 94 MHz and so on.
Thanks for sharing the video!
yeah like the little 2w pll ones from china that are great for testing stuff and diy and whatnot
Caution with those light bulbs. They distribute far more heat, when using that way, which may burn/melt the plastic display. Better not use it for a longer time and replace them with the matching types as soon as possible.
I know it takes away from the vintage - but I would calculate to adapt the bulbs to led - this device was built for 220V - driving it on 240 with that linear transformer… is not a good idea. A 7805 and a few warm white leds in series could take it a long way
@@cheapasstech They now make those screw in LED's in the same shape like the original ones and frosted.
@@ryan61384 I know they sell them for Christmas lights - but did not find led ones in this voltage
@@cheapasstech Not sure if they are the right voltage or not but they make LED replacement bulbs for pinball machines and other arcade games. If they are the right voltage then they might work. I have a receiver at home that I replaced the incandescent indicator bulbs with LED's that seemed to be a direct replacement based on the specs.
@@ryan61384 lots of 6V, 12V and 24V ones yes - they probably drive the 7v ones in this radio only on 6V to make them a little dimmer
This has got to be one of my favourite videos ever. The mix of repair and restoration was very satisfying to watch. More of these please.
Great video Vince, the flex needs to be changed as that is single insulated cable which is no longer compliant as it should be double insulated.
You can use a 1 Amp fuse doing the calculations from the specs on the back.
Thanks for sharing.
We remember something about how electronics shipped to the UK without a plug - the consumer being expected to buy and install one themselves. So putting a new plug won't necessarily spoil it being 'all original'...
I remember at school being taught how to fit a plug as nothing had them fitted. It was so frustrating when I got my NES having to find a plug before I could play it. Funny how now most devices that use USB to power it once again don't come with a power brick.
@@carlstokes7321 It's just a waste anyhow, all do have a spare brick laying around, and if not just buy one👏 Simple.
@@carlstokes7321 like having to look for batteries for our toys too
@@Alexander_l322 - for some reason the mis'ess keeps 'bogarting' all the C-batteries..
@@chezsnailez well if you did your job properly then she wouldn’t need to use it as much! Haha got ya
You could always wire the bulbs in series to give you that warm light it should have and some clear heat shrink or silicone tubing over the bulbs to diffuse them. Looks like its a seperate supply off the board for the lights, probably 6v so by using 7v bulbs you get that warm light and the bulbs last a lot longer.
Sweet lord that takes me back! My parents used to have one practically identical back in the day, must be almost 35 years since I've last seen it. Great job as always 👌🏻
Being a child in the late 1960s this looks very much like what I would have wished for back then for a bedroom radio.
Really looks the business from that era.
I have the exact same one, I bought it at a local scrapyard for a few Euros.
It worked right away but had several smaller (mostly mechanical) issues.
I lubricated all the movable parts, cleaned the pots, etc.
I also recapped the unit, since two caps were bad and it only has around four.
It is one of the best performing radios I have seen, it can get a whole bunch of stations that no other radio receives here.
At night, even Shortwave stations from all over the world are nice and strong, without any external antenna.
Beautiful radio! Working beautifully with all original components! Great sound quality as well! Bring more vintage stuff Vince, they were more creative back then!
sound quality .... are you sure ? I get your enthusiasm for vintage stuff, but I don't think this unit is not even close to be labeled as HiFi -> High Fidelity, just old radio
@Cushty_Crow calm your tits Watson, there would be soon great sound of silence once the analog broadcast is gone
That's awesome, I live in Netherlands and I had this radio as a kid in the 90ies, loved picking up random broadcasts from across the world with it, remember being very puzzled with number stations and even more so when I learned English hehe. Thanks for taking it apart, cool stuff!
These are great quality old sets that sound great when working.glad you bought this VInce as I so enjoy seeing radio repairs,and yours is sounding so good too,that was a benchmark for grundig.almost like ‘quality built in’ that type of thing.lights look superb too.
What a beautiful unit, thank you Vince for inspiring me to get into electronics
We had the exact same radio when I was in elementary school. Hearing the years it was produced we must have had one of the first. Great to see it again.
Where you said the meter on the left is the volume meter I think it shows the strength of the station you are listening to.
Awesome video! I love all your repairs and restorations!
Good work there! Those old Grundig table radios were great, and newer versions were made up until the 1990s. I have a couple of RF430s (1970s) that I haven't yet got around to looking at. My parents had an RF430, which I later kept until the 90s, but it finally went because the piano key mechanism was unrecoverable.
Hey Vince, to overcome copyright issues when testing any items with FM radio you could use an FM transmitter from an MP3 player playing copyright free music. That way you can show off the capability of the speakers without issues 👍🏻
Really enjoyed that Vince, very therapeutic. I LOVE old radios and used to collect Roberts, still got about 4. The sound the vintage radios give is magical.
Really enjoying your content - any change of seeing you? I like to put a face to a voice.
Looking forward to more of your really interesting videos. Regards from North Wales UK
I'm actually jealous of this one Vince, Great job!
Little tip for scratches on wood, you can get touch up felt tip pens in different shades of brown specifically for wood.
Deeper scratches can be filled with wax melt sticks, also available in various shades of brown, which you melt into the scratch. Then use a sharp blade to take off the excess. You can even mix them to achieve the desired colour.
Great video, and what a wonderful piece of equipment.
My dad and i would listen to a Grundig short wave radio at night ang get signals from half way around the world bouncing off of the atmosphere. I love Grundig radios, amazing craftsmanship.
congratulation on the workshop and a nice one , great video 👍👍👍👍👍
Love the sounds of cleaning, very relaxing it's definitely a hidden gem throughout your videos.👍
Wow!!! It works!!! Great fix Vince!!! 👏
Beautiful job - thanks for sharing 👌
What a beautiful looking radio. Especially on the sideboard! Great video & fix Vince! 🙏🏻
Welcome to another episode of Mr Vince's Lab.
I love vids like this Vince. This radio could very easily have just been thrown away, instead it has now got a new lease of life to be enjoyed again.
Really enjoyed watching this. Great work.😉
Men: ‘what a lovely looking radio, let’s put it there on display’
Wives: ‘what’s that old junk doing there? Put it back in the loft’
For the record, I love it and it’s a great repair, my only comment would be those lamps look too bright, they need to be dimmer and “warmer” because in those days there wasn’t enough coal, 3 day week, share a bath, we couldn’t afford the power for extravagances like bright radio lamps. Good video Vince.
Congratulations 🎉🎉 to you Vince. You deserve the new
Set up. I enjoy watching your videos. Keep up the great content.
What a beautiful radio Vince. I really enjoyed the cleaning. Sounds so warm. I love it. Excellent video
Thank you, Vince. Nice restoration. I spent a lot of time playing around with such old audio equipment when I was a teenager (flea market finds). Lots of fun and very often a lot of sound for the low power ratings. 5/10/15W really can suffice. You should try out something from the Luxor Dirigent series (eg a 3200) some time. Really nicely built equipment. Keep up the good work!
cool! I love you having a go at this old stuff :)
Never thought a change of fuse would end up in such an entertaining video. Great job as always 👍
Super nice Grundig! Enjoyed watching the bit of restoration on this video. The kind of finished reveal "faux pas" at the end had me chuckle a little. It would have been something I would have done, getting excited to show off a finished project and forgetting to connect something important. 🤣
🤣👍Thanks Shawn
An Easter Sunday Vincent fix video is more than I could have asked for
Of the many different makes of radio/electronic equipment that have passed through my hands I remember that Grundigs of any variety were always describable as "class". Also anything by Roberts Radio. On the question of the 13A fuse, I was advised its purpose was to protect the cable to the wall socket, not the device or the user! Of course, there's no harm in selecting a power consumption compatible fuse (e.g. 3A) but I was told there was no need. Your videos are, of course, most enjoyable, for which "thank you".
great fix. i love seeing older tech live on. built to last.
8:21 when you take the cardboard off of the new plug, it shows a 13 amp fuse on the right hand side Vince.
Great video, it came out really well
Hi Vince.
Fuses, especially ceramic cartridge types are often filled with sand or similar to quickly stop the arc that forms when a fuse blows.
When the fuse blows the wire melts and starts to separate forming an arc, the arc needs to be cooled or quenched quickly to prevent further damage to the circuit being protected.
The sand will fill the gap and often melt forming an insulator where the arc was. There is a lot of science in correct fuse design.
By the way, the BS1362 fuse ratings available for 13Amp Plug Tops in the UK are commonly 3A, 5A and 13Amp. Less common are 1A, 2A, 10A but are available !!
Beware of the extra heat that those bulbs will give off, possibly melting any near by plastic.
Awesome job, it looks amazing 😎👍
Nice one Vince, greetings from the motherland of this beauty. 😊
Great work, it looks amazing lit up.
Nice looking radio. In fact I have a radio in that period, Music Boy by Grundig, that was given to me in 1971 from my decease grandad, I still have it now although not working.
Great content, there have been a few times when I've found that the plug has been the cause of the power loss not just the fuse of coarse there can be many reasons for failures unfortunately we live in a disposable society where things are thrown away for the sake of changing a fuse or plug but it's nice when it's a simple fix.
I like the stylish look of this radio too. Tomorrow I will buy the same one here in Belgium, for 10 euros (!), also in working condition. Your video will help us to restore it. Thanks a lot for your video, you've convinced me to buy it!
Love the sound out of this - it's gorgeous!! And the clunk of the buttons! If you're keeping it running I'd probably recap it just so it lasts :)
Keep up the good work fella and, as always, stay safe.
Great video vince really enjoyed watching your videos
Great repair - lovely machine
This turned out great Vince. A really nice looking radio. 👌
I just love these old wooden and brushed aluminum Finishes. I've got an older denon from the 70's that has this finish.
I got it in a thrift store 20 years ago and it still sounds amazing.
Great video 👍 can't believe you didn't need to replace any caps.
When I restored a couple of 60s Roberts radios I use the Novus range of plastic cleaner on the tuner facia and it looked like factory new. Brought back the sparkle and removed some scratches.
Cheers for the tip Chris 👍👍
So enjoyed this video.not much fixing but plenty of cleaning
very cool, I love these vintage radios...
I grabbed a Grundig portable radio out of a skip at local tip yesterday and it works perfectly and the sound is so loud you don''t need to use more than 20 percent of the volume control. Other radios don't get anywhere near the volume of the Grundig.
Not bad for something made back in 76-78, I never really took them seriously before but would love to find more stuff they made.
I really like to see you do the radio/hifi repairs the other stuff's great aswell though.
Nice fix Vince!
Such a beautiful device. Nice joh Vince 🙂
I got the same radio. Those radios are made between 1971 to 1974 . They were Grundigs first series of domestic radis fitted with transistor instead valves. The only fault at mine were a loose dfial cord, so the pointer stucks even the knob was turned. Easy to fix.
A higher mains fuse rating is has no limitation of the electrical safety. The radio got an internal mains fuse matched to capacity of the mains transformer.
Here in germany all sockets fused with 16A and there is no fuse fitted in the plug, The mains cord is capable to handle high short circuits currents up to 3000 A ( for few milliseconds ) before the breaker in the panel trip. As long as you leave the mains cord as it is there is no danger. A replaced mains cord should not have anymore lenght as 1m and a cross section area of 0,75mm²
This radio has also plastic cabinet. But a sort of high quality ABS plastic. The schematic is free available in the internet from different sources.
I own a lot of old Grundig radios, most portables from th 60th . The boy series.
The fuses in UK plugs are ceramic and filled with fine sand to prevent arcing when they blow due to over-current.
Great video. I have a 1975 Party Boy 500 and can confirm that these 1960s/70s Grundigs are indeed fine sets. They weren't as solidly built as their Hacker and Roberts equivalents but the electronics are top-notch. Same story with ITT. This must be a late 'Made in Germany' model as they moved radio production to Portugal in the early 1970s. This later became the home of Grundig audio system manufacturing when radio production moved again to Malaysia ~1980.
15:50 So cool seeing your whole setup Vince! I love the super sturdy overhead camera mount, annoying when knocking the table and the camera jitters. Cheers!
Wow, I haven't seen such a big Grundig radio in over 30 years. My grandma had something very similar and I love spinning to see what stations I receive.
Nice work space setup 👍
What a nice radio but much to big. It indeed looks lovely and sounds great. Nice new working place you got yourself there. I'm happy you put the spider out and didn't kill it❤
Love the radio. Reminds me of my teenage years. Had one similar to that.
I thought it must have been post-1990 as it said made in Germany, as opposed to West Germany, but a quick search showed it was produced between 1967 and 1973. A very nice piece, so much more attractive than today's plastic rubbish. If we get at least a year out of something new today we're happy! I recently sold my old Pioneer component car hi-fi (separate CD player, graphic equalizer, tape player and radio 'brain'), that I bought as a teen in the late 80s. They mostly worked ok but some aspects needed attention. But to expect anything made today to still work 35 - 50 years from now is ridiculous. A lovely radio. It would be great to see more of this type of old tech being restored, rather than the newer stuff. Cheers Vince.
Aah the weird uk plugs, that brings back memories. They are robust but the fuse is obsolete now if you have RCD. Treading on one with the prongs up is something I'll never forget.
My grandparents still have a similar model in the living room it still works fine and sounds pretty amazing considering it was build so long ago.
"You're only supposed to blow the bloody dust off"
😂🤣
Built like a tank. Amazing find with The 220/110v jumper.
22:44 That was the nice thing about the "old" transformers. They had multiple terminals (at different stages of the winding) that gave multiple voltage inputs. This was also great with old pinballs and arcade games. You just had to move some jumpers or resolder some wires to get the desired voltage input. Also, these "old" transformers created less dirty electricity that the new switchers do.
They sell little diffuser caps that cover the bulbs & tint them different colors. I used them in my 1960s car. At one time the various warning & indicators in the dashboard had green, red, and blue lenses for various functions that became sun faded so they were white instead of the colors they were meant to be. Then I found the little colored caps for the bulbs. They come in many neat colors.
You could have re-wired the bulbs in series to drop the voltage that each lamp sees in half. They may be dim, but they will last much longer and you would be able to use the parts on hand. The bulbs you used will have a much shortened life.
Here in the states I use Old English furniture polish for the wood. It's black Walnut polish that fills scratches and nicks very well. I use it on Walnut gunstocks.
Great. I love the old stuff repairs
WoooW! Well done! Great old radio got a new life! :) Grundig is good brand for radios.
I'm amazed your able to keep your desk so clean. Mine is so messy and full of random bits and bobs.
good work mate !!!
I had a family member who worked at Grundig's factory in Penge who used to swipe stuff that was going to be binned and we would fix stuff up, the old bill now have the place and they do all their forensic electronic work there. BTW had an absolute brilliant week in the watches... Seiko Actus very rare fully working and absolutely accurate for... £8 woohoo ^-^
I want to work on an old radio now ! Great video. 73's Andy M6APJ.
The connector on the backside is called TA/TB connector in german TonAbnehmer/TonBand in english turntable/tape also you can plug a cassete player in, or you can make a cable with the right plug to listen to music from the phone. I have a few german tuberadios from the 60s and they have the same blown lamps it's hard to find diffused, but normal do the job great too.
Lovely piece of quality equipment. Be careful the heat from those over-voltaged bulbs doesn't melt the frequency chart or anything else, replace them asap
Yes I would recommend connecting them in series to half the voltage, save you buying new bulbs. Those 4V bulbs will run way too hot!
Incredible transformation. What a beaut it is.
I know that was more of a cleaning video but you made it a really interesting upload Vince 😊
that finished radio is gorgeous. i hope you get the right bulbs for it.
That is indeed a lovely thing . I love the style of it . Grundig did some quality stuff . I currently use a little grundig Yacht Boy radio on my boat . It has a very similar style to this
1st class video to watch thank you take care kind regards from me kenneth
**IMPORTANT**
Me M8 Vince,
Just a heads up, that there are a two types of DeOxit, One is for direct contact switches, whilst the other which is extremely important to know about as it does not destroy carbon contacted devices Eg: "potentiometers" and "carbonised" contact switches found in keyboards and portable gaming systems, if the carbon is removed from the rubber the switch will not work, and if you replace the carbon with a conductor it could damage "electrical current" sensitive components.
Anyway I want you to know I watch all your videos and drop a Like, BUT Most importantly in support allow all your adds "As long as they are under 30 seconds to run through"..
Hi Vince yea Grundig is well know brand in germany. It is one of the pioneers of the color tv and projector. Very nice radio they made in those times., Thank you for the nice video.
I really appreciate everything labelled in German. „Klangwaage“ is a really nice word :)
Great video 👍