More than helpful , i was about to go and buy glue sticks . Thanks a lot for the tips, now I can go and unlock my bicycle . If I still find it there , lol .
As a professional locksmith, I can tell you that what we are seeing done to these locks runs the risk of destroying the lock. I have never had to resort to anything more than extraction tools made for the job or a pair of tweezers. I see a lot of income potential in the things we were shown in this video.
I found out the best tool for a broken key problem. Fingernail Clippers. It's able to grab the broken key. I tried everything from pushing the key out the other side to needle nose pliers. Spent 3hrs trying to figure this dilemma out. Tried fingernail clippers and within like secs it was out.
@@vaiciciaku You're welcome. I was frantic. I was at that point of either replacing the lock or calling a locksmith. I decided to take the innards and pick up random things just to see maybe I'd get lucky. I saw the fingernail Clippers I said couldn't hurt. I was shocked that an everyday household item that's pretty much in everyone's house worked flawlessly.
@@theknockwhoones8740 you're welcome. Ik I was frantic thinking great how the heck I was going to get the broken key out. I tried doing what others had done. I was about to give up and just replace the whole lock when I looked in a cabinet and I saw the Clippers and thought might as well I've tried everything else. After the quick removal of the key I was shocked it worked so well. I now have the Clippers in my tool box just in case it happens again. Lol.
Thank you! Key broke off then I used top broken half to try spin lock round and it pushed it even further in. Anyways I aligned the lock with a knife then used a super thin allen key from other side and it pushed the key out just enough to use a scalpel to prize the last bit then used fingers. Took me all of 90 seconds...so happy!!!
@craftroom your methods are the best that I have seen. I went to try the drill and screw method and accidentally discovered another way 😁 I put some machine oil before so I could drill and said let me try to tap it, and by tapping he bottom enough to release the broken half of the key for pulling it out 🤗 ( key drum was for a machine not a door lock )
Thank you looked and tried a few things from other videos then saw this and perfect pop with the knife first try. It’s all about the angle I guess going from the top. Thanks so much. 💪🏼👍🏼🏆
This should be titled "how to remove a brand new key from a brand new Euro lock", because removing an old key from a weather worn padlock is nowhere near as easy as any of these methods. In fact, it's close to impossible.
Those are easy compared to trying to remove one with the slide over cover that is spring loaded! Have hold it out of the way while still trying all these tricks. Would like to see a tutorial on that problem.
I’ve never seen a lock made in the last 50 years in which you can push the key out from the other end. The hot glue method will work if you use it to stick an appropriately shaped piece of wood or metal to the key end, assuming the key can be removed easily. Individual results depend on the situation. It requires a little thought and preparation. The most important thing in this video is the importance of lining the key stub properly before attempting to remove it. Your results may vary.
It's a profile cylinder lock, they are mainly used in Europe or those double windowed back doors in the US. ("French doors"). As for key extraction, usually any small metal pointed object can be used if the keyway is aligned right. Kinda how he used the razor blade by "inching" it forward.
These are for hotels and caretake, in case something happens to the client or customer, and the left their key into the lock from the inside. You cannot buy this in diy, but need to visit the pro's or know where to search for in internet.
Well I'm in the UK and I just pushed my deep broken key out from the other end with my smallest thinnest Allen key and damn am I happy about it. Sure needed a scalpel to prize it a little but without the thin Allen key from other side I would be screwed it was too far in.
Most of those are completly impractical or destructive.. Put a drop of super glue on the broken off part thats in your hand.. carefully rejoin the two parts before super glue sets and hold for 2 and half minutes.. carefully pull it out and get a key cut mediately.. works with the cheapest nastiest super glue because the metal break is fresh and clean so it grabs strong enough for removal.. Ive done this befor, fast.. no fuss.. no damage..
as soon as you put a drill anywhere near the lock then you may as well just drill out the whole thing anyway as the lock is not longer fit for purpose and will need to be replaced.
I used glue stick a minute ago and it worked, I got my key out.. the trick is thicker glue stick and letting it dry for 5 mins before you pull it out. It worked for mw
But what if the lock is in a door and the key has been turned against the mechanism pressure and snapped, the barrel doesn’t turn anywhere near as easily as shown 😳 in fact sometimes not at all.
All methods here assumes the key blade can be taken out. I happened to have a plastic key broken in half way down the cylinder and it is a car with no the other end. And I had to turn the key to acc. position before the pin on the side of the cylinder can be pressed to release the cylinder. I think one or more tumbler keys is broken and therefore the key got stuck.
Diferente manera para sacar una llave kebradas de alguna manera a qué sacarla el cerrajero cobra más que comprarse una puerta con chapa agalo usted mismo
На стенде красава! А сломал я снаружи?.. У меня в барсетке обязательно есть дрель с набором,разметочный циркуль,пистолет для "горячих соплей",бумажный скотч.......И,С ДРУГОЙ СТОРОНЫ СЕКРЕТА Я ВЫТАЛКИВАЮ ОБЛОМЫШ(как открыл дверь не помню)😁😁☝️✋
Thanks for your time! Hope it was helpful!
ㅇㄴㅇ
So helpful today my door key broke and I do 00.52 second video clip from thus video
The best way - no broke key
Glue gun has worked for me🤷🏻♂️
More than helpful , i was about to go and buy glue sticks . Thanks a lot for the tips, now I can go and unlock my bicycle . If I still find it there , lol .
As a locksmith. I approve of all the methods using baking soda, glue and drills. The more locks you potentially damage the more money I make.
Locksmit here:) i make cilinders.
What you say is true.
hahaa. im just wondering who carries a soldering iron with them lol
@@MoroccanAnwar I do, it's in my "never know" box of tricks that i carry around 😁
@@MoroccanAnwar you would be surprised. As a freestyle drone pilot I have a portable one in my drone bag that can run off of a LiPo pack.
Yes at escalated call-out charges now we know how to do it we won’t need u !
As a professional locksmith, I can tell you that what we are seeing done to these locks runs the risk of destroying the lock. I have never had to resort to anything more than extraction tools made for the job or a pair of tweezers. I see a lot of income potential in the things we were shown in this video.
Twist: the author is a professional locksmith who also benefits from people damaging their locks
The only videopoints that I have seen which points out the impotrance of the opening position. Worth it just for that!
I found out the best tool for a broken key problem. Fingernail Clippers. It's able to grab the broken key. I tried everything from pushing the key out the other side to needle nose pliers. Spent 3hrs trying to figure this dilemma out. Tried fingernail clippers and within like secs it was out.
Thank you for commenting this! This is what worked for me! Big thanks!
@@vaiciciaku You're welcome. I was frantic. I was at that point of either replacing the lock or calling a locksmith. I decided to take the innards and pick up random things just to see maybe I'd get lucky. I saw the fingernail Clippers I said couldn't hurt. I was shocked that an everyday household item that's pretty much in everyone's house worked flawlessly.
Took me all of 5 seconds, thought it would be too big, worked perfectly. Thank you kind internet stranger for your wisdow saved me much time
@@theknockwhoones8740 you're welcome. Ik I was frantic thinking great how the heck I was going to get the broken key out. I tried doing what others had done. I was about to give up and just replace the whole lock when I looked in a cabinet and I saw the Clippers and thought might as well I've tried everything else. After the quick removal of the key I was shocked it worked so well. I now have the Clippers in my tool box just in case it happens again. Lol.
Bro you saved my ass thanks
You just saved me around 100-150$. Thank you!!!
I used the fourth method and it was successful, Thanks for the video
Thanks man.. it s been two years i did'nt took off the brocken key. Now it works... ♥️♥️♥️
Awesome ! really worth the watch, never again will I not get the broken key out, Thank you so much
Thank you! Key broke off then I used top broken half to try spin lock round and it pushed it even further in. Anyways I aligned the lock with a knife then used a super thin allen key from other side and it pushed the key out just enough to use a scalpel to prize the last bit then used fingers. Took me all of 90 seconds...so happy!!!
@craftroom your methods are the best that I have seen. I went to try the drill and screw method and accidentally discovered another way 😁 I put some machine oil before so I could drill and said let me try to tap it, and by tapping he bottom enough to release the broken half of the key for pulling it out 🤗 ( key drum was for a machine not a door lock )
Praying out the broken key with a flat small screwdriver worked very well, thank you very much.
Thank you looked and tried a few things from other videos then saw this and perfect pop with the knife first try. It’s all about the angle I guess going from the top. Thanks so much. 💪🏼👍🏼🏆
Spare key trick worked for me , pushed it out just enough to extract the small broken bit . Thanks again pal
Thanks so much for these hacks!! I was able to remove my broken key!! Saved me loads of money!!! ❤️❤️❤️❤️😍😍😍Bless you!
Which method worked? What kind of a lock was it?
Thank you. Helped solve my issue with key broken in the lock
How you do get inside your house to push the other key inside the lock if in the very first place you are blocked outside..?.😅
It's so easy..!
You order a pro-burglar to manage the problem...
I hope it was helpful.. 😉
This should be titled "how to remove a brand new key from a brand new Euro lock", because removing an old key from a weather worn padlock is nowhere near as easy as any of these methods. In fact, it's close to impossible.
It's called spraying some wd40 on one of those old ass keys you're talking about.
그러니 공자가 세계3대 성인이제
Wd40
😂😂😂😂
Thank you for the tips.
Thank you. The first solution worked for me :)
Nice but what about if you break it in car door or a padlock where you don't have a double ended lock or
The scalpel/craft knife worked for me; admittedly I did think the glue stick thing worked and tried it first 😅
You saved me £120 thank you.
The oil helped me , thank you
hi, I had a broken lock thank you IOU ONE it took me 2 hours to try the glue stick method ❤❤❤❤❤❤
Awesome it's really working thanks for this
I used the Yedi power, it WORKED!!!!! THX
Very helpful video,, thank you vaiii
Thank you so much
Just now was happened to me 😄👌♥️
Try getting a broken key out of a shipping container housing lock. No room for any tool to go in. 🤷♂️
Well it has a ball and a bat in it, so 3 strikes and I'm out. 🤔
Thank you so much,this hack really useful to me
Wow am truly thankful . Thanks very much
I tried the Jedi power and it works!
Thanks alot this video just helped me
Use a fish hook straitened out push the barb side in on the key cut side and pull it out with the barb
Very good information
Great ideas, thanks a lot.
Those are easy compared to trying to remove one with the slide over cover that is spring loaded! Have hold it out of the way while still trying all these tricks. Would like to see a tutorial on that problem.
Thanks! It worked
I’ve never seen a lock made in the last 50 years in which you can push the key out from the other end.
The hot glue method will work if you use it to stick an appropriately shaped piece of wood or metal to the key end, assuming the key can be removed easily.
Individual results depend on the situation. It requires a little thought and preparation. The most important thing in this video is the importance of lining the key stub properly before attempting to remove it. Your results may vary.
It's a profile cylinder lock, they are mainly used in Europe or those double windowed back doors in the US. ("French doors").
As for key extraction, usually any small metal pointed object can be used if the keyway is aligned right. Kinda how he used the razor blade by "inching" it forward.
Shocking
These are for hotels and caretake, in case something happens to the client or customer, and the left their key into the lock from the inside.
You cannot buy this in diy, but need to visit the pro's or know where to search for in internet.
Well I'm in the UK and I just pushed my deep broken key out from the other end with my smallest thinnest Allen key and damn am I happy about it. Sure needed a scalpel to prize it a little but without the thin Allen key from other side I would be screwed it was too far in.
Gracias hermano ya voy a poner a prueba tu consejo. Saludos de Ecuador mitad del mundo
Lock Picking Lawyer videos also 👍
Ty you help came just in time.
Thanks! It was super helpful!
Thanks it was helpful
Most of those are completly impractical or destructive.. Put a drop of super glue on the broken off part thats in your hand.. carefully rejoin the two parts before super glue sets and hold for 2 and half minutes.. carefully pull it out and get a key cut mediately.. works with the cheapest nastiest super glue because the metal break is fresh and clean so it grabs strong enough for removal.. Ive done this befor, fast.. no fuss.. no damage..
Thank you ❤
Removing the key with divider is possible and very useful to me. But others were not so practical. Thanks for this helpful vedio
Nice and easy when the lock isn't in a door
Thank you!!! 😁
Merci vos astuces m'ont bien aidé
Thank you !
thanks thanks thanks so much 👍👍👍👍❤❤❤❤
Well I cut trees for a side business so you know what tool I would use👍
Very helpful 👌🏽
The tool at 1:20 in video helped me
I use a fish hook to pull broken keys out every time. A brass crappie hook straightened like a needle. The barbed end will grab a key easily.
Thank you took it out with the hex key
You could always be like me take the hemostats that I used to smoke joints with and use those. It works.
Thanks a million.
I love you.
Thank you
Very good!
Any tips for a barrel that intermittently spins and doesn't engage?
Some trick about realigning with a key in both sides .......??
Thanks so much .
Cách lấy chìa khóa bị gãy trong ổ khóa hay quá
What kind lock is that I have one but don’t know what is used for?
European profile cylinder lock. They tend to be on what are refered to as French doors in the US.
Parabens nota mil valeu!
Thank you . ❤️
This is really informative and useful. Thank you for this amazing video./-strong/-heart:>:o:-((:-h
Muy buenas ideas! Gracias!
Poder Jedi 😁😁
Огонь👍. Я ведь всегда с собой тоскаю дрель, фен, пилы пинцеты и всякую херню.
Круто, а зачем? Я никогда не открываю сам замок - всегда вызываю мастера. Советую то же так делать.
@@craftroom зачем тогда это видео нужно?
Agar key hole ke andar kisine badmasise steel powder bardiyato kyakare pls bataho
*افكار جميله جدا يا عزيزي*
as soon as you put a drill anywhere near the lock then you may as well just drill out the whole thing anyway as the lock is not longer fit for purpose and will need to be replaced.
Nicely done
What if only only side has lock and other has thumb turn.. ?? What then?
Muy bueno. Very good
Really worked. I got safe from scolding
Thank you : )
Ye Jo ankal kry ha na inki chabi ziyada under nai tooti..mery lock ki adhe chabi under roti ha wo nai Nikal Rahe
super! 👍👍👍
Bending the life out of that drill bit .lol
Hyviä ideoita, valinnanvaraa on.
What if the key after it broken is pushed into the lock, feels like impossible for me to get it out 😅
Finally I took out my room key 🗝️ , 😂
Thank you
I used glue stick a minute ago and it worked, I got my key out.. the trick is thicker glue stick and letting it dry for 5 mins before you pull it out. It worked for mw
Try open still attached on the door..
The other side key side insertion work for me in less than a min
В двери обломай ключ, а потом покажи как вытащил
I bent the tip of a needle and pulled out the broken key
Слухай ...а як потрапити у приміщення як показано у першому випадку... шоб вставити інший ключ ????)
Thanks
Hilfreich - Top 👍
But what if the lock is in a door and the key has been turned against the mechanism pressure and snapped, the barrel doesn’t turn anywhere near as easily as shown 😳 in fact sometimes not at all.
All methods here assumes the key blade can be taken out. I happened to have a plastic key broken in half way down the cylinder and it is a car with no the other end. And I had to turn the key to acc. position before the pin on the side of the cylinder can be pressed to release the cylinder.
I think one or more tumbler keys is broken and therefore the key got stuck.
A metal bobbie pin fixed right will also work ...
Muito bom! Excelentes dicas! Soluções simples e eficazes pra resolver um problema grave. Parabéns pelo vídeo! Um grande abraço!!👏👏🇧🇷
Buenos tardes Raymundo. Arriba Arriba!!! Upside down question mark. Illegal immigration to US.
Diferente manera para sacar una llave kebradas de alguna manera a qué sacarla el cerrajero cobra más que comprarse una puerta con chapa agalo usted mismo
tankyou.
My key is broken inside deeper than that 😢
На стенде красава! А сломал я снаружи?.. У меня в барсетке обязательно есть дрель с набором,разметочный циркуль,пистолет для "горячих соплей",бумажный скотч.......И,С ДРУГОЙ СТОРОНЫ СЕКРЕТА Я ВЫТАЛКИВАЮ ОБЛОМЫШ(как открыл дверь не помню)😁😁☝️✋
A Stanley knife the best