How to fix Nissan qashqai 1.5 dci wiper linkage
ฝัง
- เผยแพร่เมื่อ 5 ก.พ. 2021
- After the wiper stopped working I asked some car parts shops to buy a new one .
Unfortunately they all advised me that the only place you can buy is the dealer and
It was expensive about £160 pounds.
I found the Rods repair clips from eBay
Very helpful thank u.. I'm havin problems with the wipers realignment .. the easy job is the hardest lol
I have a 2010 Qashqai 2.0 4x4 . I am proud of having It. Thanks for your videos.
I’m not very proud of my 2008 it’s like a freezer in winter and a sauna in summer.
I'm going to change the wiper motor in a while, i ve never done it before, but there's no way I'm paying some dude to do such a simple job, considering I got a brand new motor for €70. Great video.
Thank you so much I now know how to tackle this tomorrow fingers crossed it all goes well
Awesome i just completed this task. £9.70 for 2 clips. 30 mins work, thanks!
You are a great youtuber
Great video. Helped me out thank you so much 👏🏽 Liked and subscribed
Saved me 200 pound on a new linkage. Thank you
200? They’re €40 on eBay
@@michaelwalsh9145 my garage quoted me 200 pound for new linkage and labour to fit
Thankss dude. Very helpful
great video many thanks for that im changing my own
Many thanks great video
Thank you great video and helpful but where you get the 2 klips from
Very good to help us
Excellent video any other video had music playing in the background and you couldn’t hear what they were saying, thanks.
Nice one !
Nice! I repaired it by drilling a 4.5mm hole through (axial) and clamped parts together with m4 bolt/nut .. cramped space however..
I did the same before but the nut came off after a two weeks
@@a-tech1815 ..I think I replaced it after all with an after-market mechanism..
Surely no original 😄
should have used a nylon threaded nut@@a-tech1815
I there a wiper brakes on this car that needs replacement? Mine work just fine but they go just a centimiter to far and i dont know how to adjust them
Open the wiper and fix them where should stop
Hi, would it still work if I just welded it at the joint ?
I don’t think so
Wiper linkage came loose and then off, kindly tell me how can i find it around and fix it. As I'm in uk stoke on trent ?
Hi. find the part ? I bought it from eBay
I've just replaced the linkage on my car and now the sweep on the driver wiper is a bit too long, my wiper hits the a piller and the lower seal. The linkage is straight so I think the aftermarket part is a bit long and I don't think the sweep can be adjusted, can it?
No it cannot be adjusted
@@a-tech1815 thank you for replying
Hey. In my case one arm works and the other does not. So isnt the motor. Is this as the same problem as mine? thanx in advance
Have you opened and checked it?
If not open it to see
I have the same problem, the passager side didn't wirk anymore. I bought a wiper mechanism 35€ and today I'm going to try it. One part came from its place. I can see it from outside.
@@a-tech1815 yes. everything is connected and working. keep the good work
Where did you get part for the fix
I bought it from eBay
www.ebay.co.uk/itm/262886390389
Where can you source this?
It's exactly what I need for my wiper arm that keeps popping off the motor arm
I am having the same issue, pls can you help with the link to eBay store you bought from, thanks
www.ebay.co.uk/itm/175375117907?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=jcov_bxprc-&sssrc=4429486&ssuid=9NU3SwS8Rom&var=&widget_ver=artemis&media=MORE
Use this much better than those kits
Eres un genio, gracias por el video!