sir insfection nyo muna ung brake pressure like doon s brake valve nya mag try kyo mag open ng pipe doon just for checking kung may nag fflow n oil s brake system nya, then check. nyo. rin ang differential oil level baka nman may internal leak
If there is way to acces or to do the same try it, if not you cannot do any thing, catepillar system is not the same with the other brand of heavy equipment
bro sorry for the late response,about the error,190-8 that is speed sensor located in flywheel,that sensor it eighter sensor is damaging or totaly damage,-8 means inaccurate reading or fulse to ecm,its possible also on the harnes maybe inspect the harnes before you do the replacement of sensor
bro sometimes its because of fuel airlock, or maybe the injector actuation sensor, if that sensor is damage no chance to start, or you can try to remove hose at the return valve, then the return valve try to hold with your finger or put something that will not having pain to your finger while holding the pressure on cranking time try it.
try to used starting fluid, crc or petrol, if still not starting maybe the actuation sensor damage, but you have to make it sure that the fuel is flowing on the return valve, if not maybe some is wrong on fuel pump ok.
pump 1 dsi meaning sensor mo s pump 1 its eighter ung sensor damage or wire damage inspection nyo, harnes, kung low power macheck kyo ng pressure para sigurorado bago kyo magadjust, mag record kyo para maybases s mga pagbabago, or contakin nyo ako s whatsapp, +971567581176
@@caterpillarjhunhunk boss mababa po ang reading na pressure Ng pump 1 around 3111 kpa ang pump 2 NASA 4111 sa #1 rpm.pano po ba mag adjust? Nakita ko kc sa iba Yung nut na 16 mm ang niluwagan tapos pinihit Yung Allen wrench.yung Sayo iba 30 mm ung nut na niluwagan mo.ano po ang Tama?
sa gilid ng hydraulic pump may dalawang solenoid ung nsa bandang gitna check mo un baka ung wire nya eh walang supply n lumalabas arround 24v ang supply doon check mo muna. contakin mo ako s whatsapp +971567581176 para s mabilis n usapan
marami n akong na encounter n ganyan, ppweding walang supply n npasok s power shift mo, or ppwede rin na mataas ang volume ng hydraulic mo, kpag ganyan kailangan mong mag adjust ng flow nya reduce mo
Well Done Bro Keep it up bro 😘 Love From Saudi Arabia I am From Pakistan 🇵🇰 Nice Job
thanks bro
Good Explanation ❤
It helps a lot sir jhun... thanks a lot
Boss you are the best
thanks bro
I really love your explanation from Ghana
Thank you very much for your helpful data
thanks also
Good job. Thank you
Thanks bro
❤❤❤ Love you
Asante sana kaka maana nilitaka nirudishe dukani hii motor
Bro i can't understand what you saying
@caterpillarjhunhunk sorry I speak swahili
@caterpillarjhunhunk This video helped me thank you...I would like to know more things from you bro
Sir long time you not uploaded any vedio
oh very sorry about that i'm very much busy everyday maybe this week i have some videos we will going to upload
Sir patulong po kasi yung 740 articulated dumptruck wala syang preno? Ano po ang gagawin po idol?
sir insfection nyo muna ung brake pressure like doon s brake valve nya mag try kyo mag open ng pipe doon just for checking kung may nag fflow n oil s brake system nya, then check. nyo. rin ang differential oil level baka nman may internal leak
@@caterpillarjhunhunk sir tanong ko po ulit tungkol sa parking brake po ayaw po gumawana po 740 po
Sir, how about lonking excavator, do they have the same process on calibrating? Are they common? Tnx in advance
If there is way to acces or to do the same try it, if not you cannot do any thing, catepillar system is not the same with the other brand of heavy equipment
I have a problem in excavator 320D2L with s/no : Zcs there's an active code 190-8 . I need your help please
bro sorry for the late response,about the error,190-8 that is speed sensor located in flywheel,that sensor it eighter sensor is damaging or totaly damage,-8 means inaccurate reading or fulse to ecm,its possible also on the harnes maybe inspect the harnes before you do the replacement of sensor
Bro good morning, I have 950h c7 engine crank but no start and no other warning,no fault codes?
bro sometimes its because of fuel airlock, or maybe the injector actuation sensor, if that sensor is damage no chance to start, or you can try to remove hose at the return valve, then the return valve try to hold with your finger or put something that will not having pain to your finger while holding the pressure on cranking time try it.
try to used starting fluid, crc or petrol, if still not starting maybe the actuation sensor damage, but you have to make it sure that the fuel is flowing on the return valve, if not maybe some is wrong on fuel pump ok.
O esquema elétrico de motor vc tem?
thanks bro any problem
Boss,,nag low power Yung cat 325d nmin nakalagay sa monitor pump 1 DSI-3 ano pong sira dun at dapat ayusin?
pump 1 dsi meaning sensor mo s pump 1 its eighter ung sensor damage or wire damage inspection nyo, harnes, kung low power macheck kyo ng pressure para sigurorado bago kyo magadjust, mag record kyo para maybases s mga pagbabago, or contakin nyo ako s whatsapp, +971567581176
@@caterpillarjhunhunk boss mababa po ang reading na pressure Ng pump 1 around 3111 kpa ang pump 2 NASA 4111 sa #1 rpm.pano po ba mag adjust? Nakita ko kc sa iba Yung nut na 16 mm ang niluwagan tapos pinihit Yung Allen wrench.yung Sayo iba 30 mm ung nut na niluwagan mo.ano po ang Tama?
@@caterpillarjhunhunk bale boss dun sya prang mamatay makina pag isabay Yung deeper xka boom up...
Boss pwdi magtanung anung kaya itong error na E008 boss sa weight limit Ng 320C
tika matanung ko lang anu ba ang naging apikto ng error n yan s machine,medyo luma n ksi yan model n yan,pwede ko bang mahingi sr# ng machine
Good day po sir master, PATULONG PO ano po echeck pag Ang excavotor namamatay pag nagbuhat Ng mabigat,PC200-7
sa gilid ng hydraulic pump may dalawang solenoid ung nsa bandang gitna check mo un baka ung wire nya eh walang supply n lumalabas arround 24v ang supply doon check mo muna. contakin mo ako s whatsapp +971567581176 para s mabilis n usapan
Good job u sir me have sem problem Saudi Arabia no understand please help 😢
contac me in whatsapp +971567581176
Por favor necesito explicación como instalo el censor de velocidad Cat 320
Amigo can you translate in english i cant understand
❤❤❤❤❤❤❤❤❤❤❤❤❤
Boss nag eengine drop ung cat325 namamatay pag sagad s taas ung boom. May na encounter n po b kayu n ganitong trouble?
marami n akong na encounter n ganyan, ppweding walang supply n npasok s power shift mo, or ppwede rin na mataas ang volume ng hydraulic mo, kpag ganyan kailangan mong mag adjust ng flow nya reduce mo
@@caterpillarjhunhunk cge boss subukan ko .. salamat ng marami
Hi bro 😊
hello bro
Hello mr
I have a problem
whatsapp me +971567581176
Sir pwede mahingi what's app mo
+971567581176 whatsapp ko
It helps a lot sir jhun... thanks a lot
welcome