Complete Guide to Unboxing and Assembling the Vortex Rotary Axis

Welcome to our comprehensive Vortex Rotary Axis assembly guide. In the following video, we'll guide you through the gratifying journey of unboxing and precisely assembling your very own Vortex Rotary Axis. Let's enthusiastically delve in, ensuring your Vortex Rotary Axis is primed and poised for optimal performance!
Chapters:
0:00 Introduction
0:46 Unboxing
3:25 Assembly Time!
3:48 Headstock Assembly
7:29 Belt and tensioning
9:50 Chuck
14:10 Limit Switch
18:08 Front and Rear Covers
20:07 Tailstock Assembly
25:50 Mounting Headstock on Track
27:12 Mounting Tailstock on Track
28:48 Track Ends
31:20 Wiring
39:02 Outro
For written instructions, visit our Vortex unboxing/assembly page: resources.sienci.com/view/vx-...
Order your Vortex Rotary Axis here:
sienci.com/product/vortex-rot...
We're here to assist you every step of the way during your Vortex assembly. Should you encounter any specific challenges, please don't hesitate to share them with us. Your feedback is invaluable as we continually strive to enhance the assembly process and ensure your experience is nothing short of exceptional.
▸RESOURCES
JOIN US
▸ Sienci Community | forum.sienci.com/
▸ Facebook Group | / mill.one
▸ Instagram | / siencilabs
Hashtags:
#siencilabs #longmill #vortex #vortexrotaryaxis #rotaryaxis #cnc #milling #unboxing #assembly #guide

[@williamstauffer1542]

Thanks for this very informative video! My Vortex came yesterday so it's perfect timing!

[@herbertliedel7019]

Put most of mine together last night. have to change a few things on my spoilboard before mounting .

[@eprohoda]

ttoal unusual unboxing. ;))

[@KenDo_creation]

One of theses days I will get one

[@dwaynejohnson7499]

nice video it has built my interest in getting the vortex now. my biggest question to you is, what is the biggest area it can carve?

[@SienciLabs]

The max stock diameter for the Vortex is 4", with the 30" kit doing 22" long and the 40" version being good for 40" long.

[@alassafcam]

Does it work with shapeoko ?

[@gusfavoreto2966]

Can I use it on Onefinty?

[@SienciLabs]

At this time we don't have any testing to see if it's compatible with the Onefinity but it may be something we explore in the future!

[@ryankim3612]

Well, I guess I will hold off on ordering until this happens…. Shoot!

[@jaredgaylord5315]

@@ryankim3612Or you could buy a Longmill….

[@user-wf6im7mt6m]

firts