No, lead acid batteries will trickle charge when they reach full charge. Important thing is to set voltage correctly, for 12V batteries it’s 13.8v but I prefer to set 13.6v
You can download all needed files below, click “show more” in description and download the file attached to the link, in that file you’ll find schematic, part list and zip file. Simply upload this file to pcbway website and they will manufacture blank pcb for you. You could buy parts at JAYCAR or order on AliExpress.
Ordening the PCB by re-uploading the files is not the best way to go. PCBway has a project section where the developer can upload the design for others to easily order. Can you upload your project in the same way? Thanks!
Putting lm317 in parallel for higher current is not ideal ,you should have used power pass power transistor with single lm317 for higher current output.
Neat! This isn't the 24 volt battery, 19 & 12V out UPS I want to build, but it is definitely a step in the right direction!
Nice! Can I put two in series so you have 12V and 24V? Some POE switches run on 24V some on 12V. The security cam NVR also runs on 24V.
Great video, thanks, I will build one of these for sure. Is there any chance of overcharging the batteries? Thanks Peter
No, lead acid batteries will trickle charge when they reach full charge. Important thing is to set voltage correctly, for 12V batteries it’s 13.8v but I prefer to set 13.6v
@@MaxELECTRONICS Thanks Max
What is approximate cost for PCB board and parts?
Also, would this work for Lithium 12Vdc?
Hello friend, good stuffs in your video... What about 20volt on output? Is it possible?
Yes, definitely, you’ll just have to change couple of components to make it 24v
Great looking board Max, how do I get my own one? Keep up the great work mate. 🤙🏼🇦🇺
Joe from Australia 🤙🏼🇦🇺
You can download all needed files below, click “show more” in description and download the file attached to the link, in that file you’ll find schematic, part list and zip file. Simply upload this file to pcbway website and they will manufacture blank pcb for you. You could buy parts at JAYCAR or order on AliExpress.
@@MaxELECTRONICS Thanks Mate
can you give me the layout file to screen print to pcb board? i want to try it myself and transfer my own layout to pcb board
And please share me file to layout your video 🙏
Ordening the PCB by re-uploading the files is not the best way to go. PCBway has a project section where the developer can upload the design for others to easily order.
Can you upload your project in the same way? Thanks!
not all NVR need 24v, alot of NVR from Dahua with 4 port rj45 POE work in 12v
I’m not sure where you got 24 v from?
Putting lm317 in parallel for higher current is not ideal ,you should have used power pass power transistor with single lm317 for higher current output.
What component bro?