Samurai Front Axle Rebuild | Quick & Easy!
ฝัง
- เผยแพร่เมื่อ 11 มิ.ย. 2022
- REBUILD KIT
Trail Gear Knuckle Rebuild Kit:
www.polyperformance.com/appli...
AMAZON ASSOCIATE LINKS
2"/50mm Spindle Nut Socket: amzn.to/3NyDhYz
Ryobi Impact Wrench 1/2": amzn.to/3mpykVR
Snap Ring Pliers: amzn.to/3H1UjvE
Dead Blow Hammer 2lb: amzn.to/3NyBeDH
Cold Chisel Set: amzn.to/39fN8n5
Brass Hammer 20oz: amzn.to/3H10b8e
Torque Wrench: amzn.to/3xrLpEC
Beam Style Torque Wrench: amzn.to/3moMRkG
HD Grease: amzn.to/3xuAxG3
Grease Gun: amzn.to/3msmw5m
Race Driver Set: amzn.to/3moszI3
VIDEO EQUIPMENT
Galaxy Note 10+: amzn.to/3arTDQQ
GoPro Hero8 Black: amzn.to/3ax7LrL
GoPro Max: amzn.to/3Fzwdah
Phone Rig: amzn.to/3AwEY14
Camera Tripod: amzn.to/3lrbfma
STICKERS & APPAREL
teespring.com/stores/fortune-...
FOLLOW US ON INSTAGRAM
@fortuneoffroad
Fortune Off-Road
P.O. Box 223
Esparto, CA 95627 - ยานยนต์และพาหนะ
Thank you for all of your videos. We are working on our 92 Jimny. Quite a few of your videos have been very helpful :)
Excellent! Good to hear!
Cheers, for sharing.
Very well done video.. great lighting, easy to follow..
Awesome! Thanks for the feedback. 🤙🏻
Guess I will get to this after the season. Also going to pull the third members and rebuild them. At that time I will see how the front axle is locked. And potentially change the side gears and better axles.
That's my strategy too. Gotta wheel now, rebuild later.
Great video mate!
Thanks dude
Awsome!!!
I've been putting off doing lockers in my front and rear 88 samurai but after watching this I got motivated, thanks!
Cool man! What lockers are you looking at? The Spartan lockers work really well for me.
@@FortuneOffRoad Yep. I got the same ones.
How in the world do you wear your sneakers to the point there are holes in the toes?
Thanks for the video. My next move is the 26 spline axles and Spartan Locker up front on my Zuk. Your video will definitely help Kyle. My Spartan locker in the rear has been awesome. Made a huge difference!
Thanks for rhe feedback! Those Spartans are good lockers. I have them front and rear in both of my rigs. If you haven't purchased the axles yet I would recommend RCV. Great warranty. Cheers 🍻
@@FortuneOffRoad who can you purchase the RCV from?
@@terrycahill8362 I would go through RCV themselves. I think that's part of the warranty
I’m about to do those RCV axles in mine and was contemplating weather or not I should just buy a rebuild kit and do it while I’m in there instead of just a gasket kit. I did the bearings last year and have been daily driving mine for a year. So I suppose it’s good advice to go ahead and replace everything, thanks Kyle 🤩
In hindsight I wish I would've gotten the RCV axles instead of the Longfields. The warranty seems awesome
@@FortuneOffRoad buy once, cry once 🤷🏼♂️🤣
Great videos. Keep up the good work! Did u have to do an allignment afterward?
Yes, used The TMR DIY alignment tool.
Did you check the kingpin bearing preload at all with the fish hook scale on the knuckle?
No I just used the same shims as before and sent it
Excellent video...thank you
Right on!
Every year to two years. Not 35 years riding on 31s… Got it.
Mine didn't like 2 years, that's for sure!
@@FortuneOffRoad mine has a lot of miles and lived a life off road. I can’t remember if I replace wheel bearing or not. I don’t think so. It didn’t move much for 18y. Now I have it all fixed up and have to start tearing it apart. Oil leaks from everywhere and there is grease all over the steering knuckles. It let me know real quick how unhappy it was to start moving again. I’m not sure I want to know what the insides look like. I’m currently standing in my garage, cleaning it all out, so I have room to pull the axles out completely. Adding a proper suspension set up while I’m at it.
The video is very helpful. I’ll come back to it when I’m at that point.
Hey man, how can you tell this work needs to be done? Just picked up an '88 and a shop I took it to recommended it but I can't tell if the car actually needs it. Any telltale signs beyond knowing the time since last rebuild?
Time since last rebuild is a good indicator. If you don't know when it was, it's probably time
What tcase gear are you running
Samurai tcase with 6.4:1
Are these the original samurai axles?
Yes, but they've been upgraded in almost every way 🤘🏻
If you're not packing your bearing from the big side to the little side until you have grease coming out the small side then you are not packing your bearings.
I agree
Why am I watching a samurai video
I'd say envy
Got my seal and bearings kit. Picked up a ranch samurai in colorado. It has probably not been done in a long time. What is the studs size and pitch for the inside seals felt and plates? Great stuff!