Watched your video and read comments. Tried to follow your video except for relocating the filler hole. Everything seems to look good. Pressure test showed new tube had a slight vacuum after operating the pump. However, after reassembling, I can’t get any lift on the jack shaft by operating the pump. I’ve manually lifted the jack base to extend the shaft. But still get no shaft response to operating the pump. I’m guessing the problem is with bleeding the air. But I’m at a loss and Ang help would bee appreciated.
@@joseanselmogutierrezmendez7427 I use a light 5W hydraulic oil, made specifically for this. You can probably use Dexron III automatic transmission fluid as well.
The new filler plug doesn't have a breather hole , like the original rubber bung,does this cause any problem? Great Idea well done
Salve ho una domanda se posso.. l'olio del cambio auto va bene per il crick?
This is a neat idea my friend 🙂
🍀👌☺️ Thanks brother
I didn't know that, it was very easy.
Thanks for sharing with us my Friend🙌🙂🤝
Thanks brother👌☺️🙏🍀
Watched your video and read comments. Tried to follow your video except for relocating the filler hole.
Everything seems to look good. Pressure test showed new tube had a slight vacuum after operating the pump. However, after reassembling, I can’t get any lift on the jack shaft by operating the pump. I’ve manually lifted the jack base to extend the shaft. But still get no shaft response to operating the pump. I’m guessing the problem is with bleeding the air. But I’m at a loss and Ang help would bee appreciated.
Clear and understandable process.... BUT why did you refill with that grotty dirty oil?
Saludos, qué tipo de aceite usa?
@@joseanselmogutierrezmendez7427 I use a light 5W hydraulic oil, made specifically for this. You can probably use Dexron III automatic transmission fluid as well.
@@N269 Muchas gracias, muy bien desde Venezuela!
Não consigo inverter o meu
Ничего не понятно😅но интересно, досмотрю до конца😂
So helpful. Mersi ...
Watching
Intelligent..👌👍
Kíc 12tấn bao nhiêu k anh
Thank you so much to you
I wouldn't change the position of the filler hole, it makes bleeding easier, but it's not necessary.
Conpati
👍👍👍
👍👍💪
Just only work upsidown now 🤣👊
Does it still work the regular way up?
No. It doesn't.
Like a bull in a china shoppe - but always great ideas.
Why not create a boot to stabilize the new bottom?
N ai arătat cum ai pierdut bilele!
Upside down Jack,
half of the video is how to clean the oil tracks
Why would you need an upside down jack?
I will made own my manuel press table.
Muchas vueltas al pedo
Для чего это не понял