Nice video. One question. Why IP address is assign to customer facing port on both the PE routers?.Normally for L2VPN, routing is not enable on access port.
No response? Is there not an L3 connection (eBGP peer) between the PE and the CE? Therefore, an IP address is needed. It usually is a public IP as well.
His MPLS video tutorials in chronological order. you are welcome😊😊 1. MPLS Overivew 2. MPLS Backbone Initial Setup and Addressing 3. OSPF Configuration on MPLS PE Routers 4. 3 BGP VPNv4 Configuration on MPLS PE Routers v2 5. PE to CE Configuration on MPLS PE Routers 6. CE Configuration on Customer 1 Routers to PE 7. CE Configuration on Customer 2 Routers 8. IPv6 Configuration across IPv4 MPLS Backbone (6VPE) 9. IPv6 Configuration on CE Switches 10. Layer 2 MPLS Configuration (Pseudowire)
as seen on the network diagram, PE1 and PE2 are iBGP neighbors with OSPF adjacency as the IGP protocol. It's basically a l3VPN MPLS deployment between PE routers.
Excellent tutorial. Was very clear and informative.
great session, really simple and addressing the what l2vpn vpws is.
Thank you so much this was very informative, complex terms explained so simply to understand.
!!@@@-1221
Very nice and simple video, helped me to understand the basic.
Good video thanks for sharing 💯💯
Great Vid! Info here is Gold! Thank you so much for this!
Very nice explanation, thank you.
Brilliant tutorial
Good One...you may like to add packet flow in theory between devices
Thanks for the Video. It is very helpfull.
Nice video. One question. Why IP address is assign to customer facing port on both the PE routers?.Normally for L2VPN, routing is not enable on access port.
No response?
Is there not an L3 connection (eBGP peer) between the PE and the CE? Therefore, an IP address is needed. It usually is a public IP as well.
His MPLS video tutorials in chronological order. you are welcome😊😊
1. MPLS Overivew
2. MPLS Backbone Initial Setup and Addressing
3. OSPF Configuration on MPLS PE Routers
4. 3 BGP VPNv4 Configuration on MPLS PE Routers v2
5. PE to CE Configuration on MPLS PE Routers
6. CE Configuration on Customer 1 Routers to PE
7. CE Configuration on Customer 2 Routers
8. IPv6 Configuration across IPv4 MPLS Backbone (6VPE)
9. IPv6 Configuration on CE Switches
10. Layer 2 MPLS Configuration (Pseudowire)
so good
Which iOS are you using?
What are the configs of G0/0/0 interfaces on both PE1 and PE2? Thanks.
as seen on the network diagram, PE1 and PE2 are iBGP neighbors with OSPF adjacency as the IGP protocol. It's basically a l3VPN MPLS deployment between PE routers.