Thank you for your wonderful video. Can you show us the polarity (+and - pin position) of this drone battery? I'm trying to modify the drone's battery, but I can't find the location of positive & negative polarity in its 10-pins
Don't understand what's being done half the time and the camera most of the time is too close and there's no narratiion. Other than that it might be a worthwhile video.
@@bryantmaximilionalpha2840 I'm sorry my friend. I'm only kidding. But you were close. Change the f to an I and use the word interference. Emf is completely different. Google friend.
Why need to upgrade this? Its not a fpv drone , if you fly with goggles I would understand, but anyways this is a film drone so don't need to fix it in my opinion 😉 The Video Transmitter (VTX) is a crucial component of the FPV system, wirelessly transmitting camera images to FPV goggles. This is not the case with this particular type of drone , greetings
you used the wrong tip for that mod bro. buy some flux put it on the joint then use a bigger tip like a knife or chisel tip. when you put solder on an iron then move it to a joint the solder has already lost the flux which is what wets the other solder and makes stuff easier. buy a 10 dollar clock kit brother that you have to solder yourself and watch a few videos first on how to do it properly. you'll be an ace in no time. i used to be the same way, there is no shame in it. i have a question please. at 2333 youre removing the old antenna right? and that antenna is attached to 2 different silver pads right beside each other? i would very much appreciate it if you could answer me as im trying to fix a drone that crashed after the antenna mod was installed, then crashed again after it was put back to normal. if you can remember if the black wire was soldered to those 2 silver pads beside eachother then i'll be able to fix this without costing him any money and his channel.
Hi and thanks for the soldering tips, as I’ve only learned just last year how to tin the tip so it doesn’t burn out..so yeah, I just started learning how to solder. As for the antenna…it needs the black casing cut back far enough to expose the silver ground shielding, which you gather into a tight bunch and tin and gets soldered onto the (-)pad. The other pad(+) gets the center wire(main driven element), soldered to it. Make sure that you tin the main element also. I do have more detailed videos of the antenna connections, but just too busy to post them
Hai its really awesome tutorial and mod, thanks a lot. Did u get any improvement on GPS after modding? It is really increase the perfomance with alumunium foil?
The added aluminum foil, is to provide extra shielding from electromagnetic interference from the surrounding wires and other onboard, electrical components. Been on the shelf since last mod due to weather conditions, as well as, waiting on another component from the manufacturer, which has just arrived this week.
@@bryantmaximilionalpha2840 oh I see, i thought added aluminium foil is for increasing the perfomance of GPS. So the way to increase perfomance of GPS is to make hole on the metal core of GPS ya? Honestly i avoid to make a damage on body sjrc but want to increase the gpf perfo
@@TukangTerbangg The SJRC F11 4k is a poorly designed quadcopter, with all of it's most sensitive components crammed too close together, as you''ll find the calibration board is mounted directly to the underside of the GPS module, the wifi module sits just millimeters below the power board which itself, sits directly atop of the receiver board with a thin piece of foam separating the two. I'll soon be making another video on me replacing my power board and relocating the calibration board, as well as swapping out the GPS unit with one from a different drone. STAY TUNED!
The drone is garbage and not worth trying to modify, due to the sloppy soldering work and thin flimsy wires. Buy yourself a lykus drone, or betyter yet, a Potensic 4K drone
All environment dependent and the amount of traffic noise you're flying it in. These are 14dbi antenna that I'm using, although I'm a little skeptical about the patch antenna that I'm currently using, but I have better patch antennas laying around that I'm going to use. Also, more important, is the channel that the drone is broadcasting on, which I've found mine to be using a waaaay outlandish channel that I wouldn't dream of using.
Thank you for your wonderful video. Can you show us the polarity (+and - pin position) of this drone battery? I'm trying to modify the drone's battery, but I can't find the location of positive & negative polarity in its 10-pins
Great Work.. But what is the music name or group ? tks
Estou acompanhando alguns vídeos para o upgrade de sinal desse drone. Thank very much! From Brazil!
Don't understand what's being done half the time and the camera most of the time is too close and there's no narratiion. Other than that it might be a worthwhile video.
you mean EMI right? not EMF elecromotiveforce?
Electro Magnetic Frequencies
@@bryantmaximilionalpha2840 I'm sorry my friend. I'm only kidding. But you were close. Change the f to an I and use the word interference. Emf is completely different. Google friend.
Why need to upgrade this? Its not a fpv drone , if you fly with goggles I would understand, but anyways this is a film drone so don't need to fix it in my opinion 😉 The Video Transmitter (VTX) is a crucial component of the FPV system, wirelessly transmitting camera images to FPV goggles. This is not the case with this particular type of drone , greetings
Thanks for sharing. Was there any GPS lock improverment after the mod?
Yes slightly faster satellite connect, but it can be improved more, with more tinkering with
you used the wrong tip for that mod bro. buy some flux put it on the joint then use a bigger tip like a knife or chisel tip. when you put solder on an iron then move it to a joint the solder has already lost the flux which is what wets the other solder and makes stuff easier. buy a 10 dollar clock kit brother that you have to solder yourself and watch a few videos first on how to do it properly. you'll be an ace in no time. i used to be the same way, there is no shame in it.
i have a question please.
at 2333 youre removing the old antenna right? and that antenna is attached to 2 different silver pads right beside each other? i would very much appreciate it if you could answer me as im trying to fix a drone that crashed after the antenna mod was installed, then crashed again after it was put back to normal. if you can remember if the black wire was soldered to those 2 silver pads beside eachother then i'll be able to fix this without costing him any money and his channel.
Hi and thanks for the soldering tips, as I’ve only learned just last year how to tin the tip so it doesn’t burn out..so yeah, I just started learning how to solder. As for the antenna…it needs the black casing cut back far enough to expose the silver ground shielding, which you gather into a tight bunch and tin and gets soldered onto the (-)pad. The other pad(+) gets the center wire(main driven element), soldered to it. Make sure that you tin the main element also. I do have more detailed videos of the antenna connections, but just too busy to post them
@@bryantmaximilionalpha2840 awesome thank you. As I expected. My wire was too short to pull back enough shielding
Hai its really awesome tutorial and mod, thanks a lot.
Did u get any improvement on GPS after modding? It is really increase the perfomance with alumunium foil?
The added aluminum foil, is to provide extra shielding from electromagnetic interference from the surrounding wires and other onboard, electrical components. Been on the shelf since last mod due to weather conditions, as well as, waiting on another component from the manufacturer, which has just arrived this week.
@@bryantmaximilionalpha2840 oh I see, i thought added aluminium foil is for increasing the perfomance of GPS.
So the way to increase perfomance of GPS is to make hole on the metal core of GPS ya? Honestly i avoid to make a damage on body sjrc but want to increase the gpf perfo
@@TukangTerbangg The SJRC F11 4k is a poorly designed quadcopter, with all of it's most sensitive components crammed too close together, as you''ll find the calibration board is mounted directly to the underside of the GPS module, the wifi module sits just millimeters below the power board which itself, sits directly atop of the receiver board with a thin piece of foam separating the two. I'll soon be making another video on me replacing my power board and relocating the calibration board, as well as swapping out the GPS unit with one from a different drone. STAY TUNED!
Buenas tardes a este dron f11 pro 4kse le puede conectar cable de datos con el celular como para que no se corte la transmisión?
The drone is garbage and not worth trying to modify, due to the sloppy soldering work and thin flimsy wires. Buy yourself a lykus drone, or betyter yet, a Potensic 4K drone
it is nice, but the FPV antennas are more important !! With the stock 2,4 Ghz antenna, the F11 can reach 1500 m !!
All environment dependent and the amount of traffic noise you're flying it in. These are 14dbi antenna that I'm using, although I'm a little skeptical about the patch antenna that I'm currently using, but I have better patch antennas laying around that I'm going to use. Also, more important, is the channel that the drone is broadcasting on, which I've found mine to be using a waaaay outlandish channel that I wouldn't dream of using.
Did you have any range improvement?
Yo tengo el Holy stone HS 175D pero no me deja conectar al wi-fi y ni ala aplicación alguen podria ayudarme
Can I install more antennas?
Yes, in the two front legs, are a pair of antennas that you can remove and replace with whatever desired antennas that you like.
Cuál es la especificación de las antenas? Cuánta frecuencia y dbi?
can u give a link to the antennas you used,im looking at upgrading my f11 4k pro also
Look in description
@@bryantmaximilionalpha2840 haha...ok thanks
i just checked,nothing there..lol
@@capeRCouple sorry, been a long day... Links are in my latest video description
@@bryantmaximilionalpha2840 thanks
Please turn your camera for landscape video.
Actually, it was. But then during the editing process, it wasn't showing everything correctly, so this is how I had to do it.
The Modification is for the Wifi antenna?
Receiver
How to increase the 5G Wi-Fi range?
Use a wifi repeater, with patch antennas, or clover leaf, or helical antennas
@@bryantmaximilionalpha2840 can you recommend something, I am also interested in extending my wifi range.
@@enzopulido2579 upgrade the antennas, for starters and that alone should significantly improve both your range as well as video.
Где результат? Дальше полетел или что?
Улучшенный сигнал Wi-Fi, но не повезло с модулем gps, потому что сгорела маленькая микросхема.