BroadLink RM4 pro - How to setup and control IR devices in Apple HomeKit
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- Use a Broadlink RM Pro or Mini to link RF and IR devices into Apple HomeKit! I'll walk you through adding Broadlink to HomeKit, and then connecting an IR remote.
Timestamps
02:38 - Device Install
04:43 - Plugin Install plugins.hoobs....
09:44 - Add IR Device
18:09 - Remote Config
Detailed Configurations - github.com/kiw...
The whole idea is to collaborate. If there's something you'd like me to do a video on - please feel to comment. Cheers !
🛑 Subscribe for NEW HOMEKIT DIY VIDEOS EVERY WEEK! 🛑
Https://www.youtube.co...
Buy me a 🍺 - www.buymeacoff...
Visit - www.buildasmar...
Facebook Page - / buildasmarthome.org
Instagram - / buildasmarthome
LinkedIn - / eddiedsouza
#broadlink #homebridge #hoobs #homeautomation #Homekit #DIY #automacaoresidencial #applehome #howto #stepbystep #tutorial #smarthometech #smarthome #smarthometechnology #techyoutuber
Eddie, were you able to pickup the temperature sensor and humidity sensor in the cable that ships with the device? If possible I would like them to show in HomeKit.
Hello Quentin - went thru the dev's documentation and didn't find a way to expose them to Homekit
@@eddiedsuza Thank you for looking. I did the same and was not able to find anything. Hope they add it.
@@eddiedsuza So I contacted the plug in team and it appears it does use the temp and humidity sensors by default if you don’t specify otherwise. They mentioned updated the documentation to be more clear. I tried it and it works perfectly.
{
"name": "Living Room Temperature",
"type": "temperatureSensor",
"host": "192.168.2.95",
"humidityUpdateFrequency": 300,
"disableLogs": true
}
@@quentinwhitmyer2447 Thanks a Million .....
I dir everything what you said but I have a rm mini 3, and it doesnt let me set the button to learn
*I like the old style Echo Dot because it's small also **Newest.Technology**, gives out decent sound and doesn't take up a lot of shelf space if you want to put it on beam in the workshop or shed.*
Your Welcome
Thank you so much! I just successfully integrated my local brand non wifi dumb Air Conditioner into HomeKit thanks to this device and your video! Amazing!
Cheers
Hi Eddie, this was so helpful! Thank you very much for going step by step on this. I got my AC working in minutes
Awesome thanks !
Eddie, thanks a lot from Brazil. You helped me a lot with your tutorial. I was able to configure the blind. I ask for your help regarding the air conditioning that gets hot. I understood in your video that I must get the code for the option that heats up. My device has fan control with 4 speed options and also has the option of swing on or off. It's a Fujitsu. Should I save all configuration options? Example (heat + 30 degrees + fan 100% + swing on), (heat + 30 degrees + fan 100% + swing off), (heat + 30 degrees + fan 70% + swing on), (heat + 30 degrees + fan 70% + swing off), (heat + 30 degrees +fan 50% + swing on), (heat + 30 degrees + fan 50% + swing off), (heat + 30 degrees + fan 20% + swing on), and so on until you complete all heat and cool mode combinations, all temperatures, all speeds and all swing combinations? Another question, the right way to capture the control code is to leave the control in the desired configuration, then turn it off, then put the BroadLink in learn mode and then click on the air conditioning control to turn it on?
Hey Paul - you have to capture and save every configuration option to make it work natively in Homekit ... you'll need to be careful with your copy & paste as well so that when the plugin saves & restarts - you don't see an errors.
Hi Eddie! Big fan!, I have been trying to figure this out for my air conditioner through home bridge with the same exact plugin, is there any way possible you could make an updated video but with air conditioners?
I'll be honest with using AC's and Broadlink - it's a pain to capture every temperature value and configure every functionality and no. 2 AC's have the same code. I'd recommend get a sensibo that will auto do all this for you and save you time n frustration. For simple on / off commands - this plugin works fantastic.
@@eddiedsuza yes I had to learn this the hard way! I am now using Alexa home ridge to port my AC into homebridge through Alexa
Hi Eddie, sorry to resurect this thread, but I just found out about your channel by looking about information on how to integrate an IR Remote into Homekit.
Thanks to your tutorial I have discovered your incredible videos and I'm totally in now.
However, I have a problem using Broadlink RM 4 Pro with Homebridge. The integration works perfectly and I have set it up to control an Audio Amplifier (on/off and volume up/down buttons) as if it was a TV.
The control from the Broadling application works fine, but using Apple's Home app, the pressure of the buton to power on the device is too short. I mean, if I use the Bradlink App, I can see the orange light on the controller lighting for a couple of seconds, and turn the audio amplifier, but from the Home App, it only bliks too quick and is not enough to turn on the device.
I've tried with the setting to sendCount 3, but it only blinks three times too quick so the device doesn't turn on.
Any advice?
Many thanks for your time
Ivan ... i am glad you got the integration into HomeKit ... is there a way in the plugin configuration to add in a delay command. This plugin has the capability to add in a lot of device types and i havent had the opportunity to test them all out.
I think a delay in the signal sent can assist you to achieve the orange light on the controller. Again its a trial and error effort
I *really* appreciate the work you did with this video! (You probably didn't expect having to do full-time tech support because of this...) I'm getting ready to tackle this but have one basic question. My Broadlink device is currently configured with all my home theater components and IR commands. I assume HomeBridge/HOOBS requires the process you have outlined, as opposed to being able to access the HEX codes that have previously been learned?
Appreciate the feedback as well... Well if you are using Homebridge or HOOBS - you'll need the plugin to capture the HEX codes again to configure your devices but this does not interfere or break your current setup that's connected with the broad link hub.
You are perfect
really this video helped me alot
I only have one problem:
when I turn on the TV with the regular remote control, the home app didn't know or recognize, and still (off) in my home app and if I hit my home app switch , it will be on in the home app, but the TV is really off\
Hey Amr - this is something to do with the configuration of the plugin which will you need to do it from the top meaning run the learn commands again. cheers
can you please make a video how to add air conditioner to the homebridge using broadlink. i was not able to do it by myself, since my remote has too many controls=(
Hi Sergey, You will be surprised that I dont own a air conditioner but will in the near future :) but i have taken a note and will do one :) cheers
Eddie, it also works on my side as described. Thanks a lot for your explanation!! Now my home bridge ist worth it 100% (macMini 2010 - currently cheaper than raspberry pi and includes a whole macOS). Thanks again!!
Glad it helped! Cheers
Hey Eddie. A 'rabbit hole' of searches led me here...Perhaps you can provide some input based upon your experience with RF control/integration.
Will the Broadlink allow for control of ANY 315MHz/433MHz device? I want to have HomeKit (via HomeBridge) send a signal to lock my car doors when I initiate a 'good night' scene.
* From my research, it looks like I could alternately use an RF Scan tool (software) to grab the HEX Code from my car key fob(s)...then 'possibly' input the HEX into the plug-in configuration?
There is, literally, zero information available for adding car locks to HomeBridge...but, in simple terms, it's a very similar action to what the Broadlink device is doing for RF controlled accessories in the house.
Thoughts?
Hello Bradley - Perhaps you can add the door lock as a switch because none of the plugins for Homebridge supprot locks. All youll need to do is ensure the broadlink learns the HEX code.
The idea here is you can use as a switch which is - Open = Car Open / Off = Car locked (something like that)
Well i defintely didnt see anyone doing it with their cars ..... Good Luck and hopefully I helped.
@@eddiedsuza - Thanks MUCH for your reply!
This idea is bizarre I know. But, given the key fobs for cars all operate on 315/433MHz I thought I could get it to work...
Unfortunately, it appears that cars are using 'rolling codes' for all aspects of remote operation - and it seems that the RF Modules (for HomeBridge/Hoobs) are incapable of matching that security protocol.
I am going to continue to do some research, but I am not confident it will work.
Also - it is a VERY difficult solution to try to find any data on. Apparently I am the only one who wants to LOCK a vehicle with a 3rd-party device. But there are ALL sorts of resources for UNLOCKING a vehicle. Seems there are many people who want to get into cars...
Anyway. Thanks again for the reply.
@@uniqueflh2941 Your welcome !
Hey Eddie! Stumbled here after watching a similar video from @EverythingSmartHome. I’m currently using my SwitchBot hub to control the projector in my living room. It works ok since I can create Siri Shortcuts to control with my voice, but it doesn’t integrate with HomeKit, even with Home Assistant. So this is a very useful tutorial. I’ll be looking into getting a Broadlink device. Thanks again!
Your welcome. Jared. Cheers
Hi eddie, If i have 2 or 3 RM devices... how the device know which rm im need to use?
You will to mention in the config to add additional RM devices and the plugin will accordingly send the command to the right Device.
Great video ❤️ Do you think it would work for Aqara Smart Hub M2 that it does connect directly to apple homekit but apple homekit doesn’t support the IR?
Hey Yoskio ... well for IR supported devices theres only the Broadlink thats widely known and used. For the aqara hub it only supports Zigbee devices connectivity
Another great video Eddie. I followed all the steps and was able to get the fan coding verified in json online. I did all the hex codes etc. now when I went to restart everything I don't get a pair code for HomeKit. I can't figure out what I did wrong. everything looks correct from your example. any suggestions? thanks again!
The pair code is found on the status page in homebridge
I figured out that I didn't have "accessories" in the coding and that's why it wouldn't show up in homkit. I did eventually get it to work after several hours of looking and asking questions on reddit. works great down. Appreciate this video.
@@eddiedsuza
I have a tower fan in my office that uses IR controlled through the Broadlink. I have a few questions. Is it possible to add or rename a command in the JSON?? My fan has a 5 button remote.... Power, Speed, Oscillate, Timer & ION. I'd like use commands like this "Siri (or Alexa), change office tower fan speed," or "Siri (or Alexa), oscillate office tower fan" ... or even the timer ... the timer can be anywhere between 1 hour to 8 hour, each press of the timer button increases it by 1, so with the timer off, pressing the timer 2 times sets the timer for 2 hours. If pressing the timer button after setting it for 8 hours, it'll turn the timer off - i.e.: 0, 1, 2, 3, 4, 5, 6, 7, 8, 0, 1, 2, etc. I'd like to say "Siri (or Alexa), set office tower fan timer for 3 hours" and it'll send out the timer button command, wait a half second, send out another timer button command, etc.
However, the issues I have is I'd rather have the "swingToggle" labeled as oscillate, I only have one fan speed button that goes from 3, to 2, to 1, then back to 3... etc; There's no button command for the ION, or timer. Can these be added??
Also, the only options I have on Alexa under the device section is power and swing toggle...
Any ideas??
Instead of this:
{
...
"name": "Example Fan",
"type": "fan",
"data": {
"on": "ON_HEX_CODE",
"off":"OFF_HEX_CODE",
"clockwise":"CLOCKWISE_HEX_CODE",
"counterClockwise":"COUNTERCLOCKWISE_HEX_CODE",
"swingToggle":"SWING_HEX_CODE",
"fanSpeed20":"FAN20_HEX_CODE",
"fanSpeed60":"FAN60_HEX_CODE",
"fanSpeed100":"FAN100_HEX_CODE"
}
...
}
Can I use this:
{
"name": "Example Fan",
"type": "fan",
"data": {
"on": "ON_HEX_CODE",
"off": "OFF_HEX_CODE",
"clockwise": "CLOCKWISE_HEX_CODE",
"counterClockwise": "COUNTERCLOCKWISE_HEX_CODE",
"swingToggle": "SWING_HEX_CODE",
"fanSpeed20": "FAN20_HEX_CODE",
"fanSpeed60": "FAN60_HEX_CODE",
"fanSpeed100": "FAN100_HEX_CODE",
"ion": "ion_HEX_CODE",
"oscillate": "oscillate_HEX_CODE",
"timer": "timer_HEX_CODE"
}
}
You have to follow the developers documentation to configure the device type. Adding any other lines will result in an error.
Hi Eddie,
Still v much enjoying your videos - in fact most of my home automation setup so far is down to your education.
I’m sticking my comment here, as my question is to do with IR devices. I have set up a single Homebridged remote controlling my plasma and my preamp like they are one device, with Siri commanded scenes and everything. Works brilliantly.
Except… if one of my kids decides to switch the tv and preamp on the old fashioned way, homebridge is obviously unaware of it, and the switch states aren’t updated. So they are inverted and I have to say “telly on” to switch it off to call the kids down to dinner (brutal daddy…) Then later on when I want to watch tv I have to “resync” the IR device switches in homebridge manually. Not the end of the world, but mildly irritating.
Any solutions for this?
Thanks, and keep the vids coming!
can you please paste your config and share it with me using this site pastebin.com/
I suspect by adding a refresh value in the config can update the states in HomeKit
Have you had issues with not seeing what Ive programmed in? Ive set everything up, and double checked my code, but Im not seeing any buttons or anything.
Yes i had issues i wouldnt see buttons ... I had to double check the config,json to make sure the plugin understood them correctly. It was more with the configuration.
will there ever be an update to this plugin so its plug and play like nest and the ring plugin? I find the code extremely hard and have wanted to integrate broadlink for so long.
Hello Neilo - unfortunately with such diverse portfolio of RF remotes - its hard to hard code into the plugin. This would be an enormous undertaking. You will need to capture the HEX codes to configure the plugin.
Hi Eddie, very good video, but I'm facing some issue on the RF scan code.
Basicly the device always show as Timeout and NEVER scan the code.
Could you share your experience on it?
Hello Adriano - I personally dont have any RF devices but I always consult the Plugins Issues and I did find this solution - where the person uninstalled the Plug in, removed Config info and Reinstalled, then was able to Capture and See the Hex Codes. I have attached the solution below and may be you can try it as well.
github.com/kiwi-cam/homebridge-broadlink-rm/issues/108
Did you ever resolve your issue? I’m having the same problem
Hi Eddie, thanks for the video! I am just starting my journey getting my new Broadlink RM Pro into HomeKit via Homebridge. My initial setup will be to control window roller shades with an aftermarket motor (that apparently does work with Broadlink). After these shade motors are installed the included RF remote is programmed for the max up and max down positions. My question is, what happens if the the shades are manually controlled by their remote? Is the current open/close status sensed by the Broadlink and updated in HomeKit?
Yes its detected by the plugin and the state is updated in HomeKit
Hi eddie, thanks for these tutorials!!! I managed to install the homebridge to my home app but totally lost when it comes to installing the plug in. At this point I have both my broadlinks working ready programmed with remotes as was using them on alexa but decided to migrate to ios. Do i need to delete all my settings from broadlink before proceeding with homebridge. regarding the commands given in terminal, where do i start? thanks
Hello Andre,
Glad to know you have your hombridge up and running. DO NOT delete any settings from Broadlink - use the plugin to learn the HEX codes and then configure them as per the device type to add / control in Apple Homekit. Cheers
Recently purchased HOOBS and found your videos. Very helpful! Could you do one similar to this but for Bluetooth devices? I cant find help anywhere and I’m dying to get my Home Depot motorized bluetooth shades in homekit.
Hello Brooklyn - what's the Hub that controls these Bluetooth devices via your phone only or theres an Hub - who knows there could be a plugin.
@@eddiedsuza there is no hub that I know of. Each blind has a bluetooth motor that connects to at app on my phone. I can’t find any manufacturer information other than Home Decorators which is Home Depot’s brand. The app is just called shades app. 😕
Hello Brooklyn - if theres a plugin we can enable the Bluetooth functionality - I did assist someone to get their switchmate devices into HK but it had a plugin.
@@eddiedsuza not that I know of. I have searched for days and can’t seem to find anything. I did find a post from 10 months ago where someone else was looking for the same plugin and someone offered to make one but I can’t find it if it was ever made. My blinds are Home Decorators motorized cellular shades from Home Depot. They are definitely a cheaper smart blind option and I love them but the app’s scheduling functionality is limited so I really want to get them into Homekit. I would love a plugin but at this point I would be happy with list of what I need to do to add a bluetooth device into hoobs so I can maybe try to make something myself. Thank you so much for your help
@@griddevil4u Please consult this plugin but please do a backup just incases things go south :)
plugins.hoobs.org/plugin/homebridge-bluetooth
Hi Eddie, thanks for all your videos.
I just bought the RM4 pro. I am unable to add Apple TV as a device. I have tried to add as a device and also tried IR remote sync. Both did not work. Your suggestions.
Hey Narayan - Your welcome.
Unfortunately - the apple TV uses bluetooth remote connectivity and doesnt use RF or IR control. There used to be plugin that support ATV which i have done a video on however the plugin doesnt support the new TvOS. Cheers
@@eddiedsuza Thanks Eddie! Is there a way I can add all functions of a remote in one shot instead of 1 button at a time.
@@narayananiyer3383 As far as I Know theres no One shot Hex code capture.... You'll need to capture one by one and store it in the config
@@eddiedsuza thank you Eddie.
Hi Eddie,
Thanks for the video!
I'm majorly stuck though, is it possible to have some further guidance please?
How can I help you?
Hi Eddie, Great video can you please share the basic script you have used to make your TV work .. I tried my best to do my own but still receiving "Unhandled promise rejection" which I think because of my JSON script
Hello Ahmed, Here you go - pastebin.com/ddi7M3L1
@@eddiedsuza thanks Eddie it is working now .. do you have any other example how to add a normal air condition with no heater using the same plugin.
@@engbatt here is the link to configure the device type broadlink.kiwicam.nz/#air-conditioner
@@eddiedsuza hi , this link is down and i need it ^^ , can you upload it again pls ?
Great video Eddie. Please do guide for DockerKit plugin next. I think it is very useful to monitor the status of your docker containers in homekit.
Hello Izuwan - I did do a video on Dozzle which is also a One Stop Shop to VIEW Live Container Logs th-cam.com/video/TymReKLlg7E/w-d-xo.html
May be it will help as well ....
Another great video Eddie. I have wanted to know if there were devices like this for HomeKit.
I am having issues with HOOBs. I am getting an error, “Bridge Service Not Running”. There was a HOOBs upgrade. I am not sure if it quit working after I upgraded. I am not sure what to do from here besides wiping out the entire system. I am using the SD card HOOBs on a Raspberry Pi 4. I have it powered on a PoE. I have rebooted many times, and removed the SD card and reinserted it. Thanks for any advice you can provide.
Hi Steve - As always thank you for the compliments - its my fav driver to come out with this content.
With regards to your HOOBS - I have the same setup. Access your HOOBS UI and click on the 3rd icon on the left hand side which is called LOGS. Check here which plugin or what is prompting the error that is not enabling the bride service, This is the best place to start.
If you need any assistance - I can via my FB messenger. Cheers ...
@@eddiedsuza you did it again Eddie. You now have fixed two of my issues that really did not apply to your video at the time. I cannot tell you how it is great how quickly you reply and pointed me in the right direction. I upgraded SmartThings app in HOOBs. Come to find out that version was discontinued. I downloaded another SmartThings app. Just took me a few minutes to enter all my information and back up and running. Nothing scarier than opening HomeKit and seeing 33 items not responding. The family freaks and does not remember to turn on lights the old fashion method. Great support, great videos, totally appreciate you Eddie.
@@SteveHinrichs your welcome. Cheers
@@eddiedsuza I forgot to ask Eddie. I want to clean my SD flashdrive for backup. How do you recommend I do back of the SD card? This way I will have a backup working version of HOOBs.
@@SteveHinrichs please download the backup from HOOBS UI. You can do a backup of the SD drive but theres no guarantee it would boot up if replicated to another SD Card. The official Backup can be restored whenever you do a fresh install. Cheers
Hi Eddie, thanks for this nice video !
I’m curious… maybe I missed it, but can you also capture and send RF signals as well ?
I just got a TV lift that I would like to be able to control with the apple home kit.
Yes you can! I couldn't test one but in the description theres a link to find out how
Hi Eddie,
Great video, although I would have liked to be able to cross check your code with mine. I have extracted all the hex codes and put it into the cofig, but I keep getting this message when I restart the Homebridge:
[BroadlinkRM] Initializing BroadlinkRM platform...
[BroadlinkRM] [INFO] Automatically discovering Broadlink RM devices.
[BroadlinkRM] No accessories have been added to the "undefined" platform config.
Initializing platform accessory 'Learn'...
Initializing platform accessory 'Scan Frequency'...
So the accessories are not added to Homekit. I don't get a Homekit code to add it, like you do in the video.
When I cross check against the master file on github I don't see any mistakes.
Any help would be much appreciated.
Please follow this link - seem like theres a bug with HOOBS github.com/kiwi-cam/homebridge-broadlink-rm/issues/540 and provide your screenshots for the developer to assist you. Cheers
@@eddiedsuza I am running Homebridge on Raspberry PI 4, but that should be the same code, right?
@@eddiedsuza are you yourself still able to add and remove new devices?
@@aadkszcn actually I moved away from Broadlink ... too tedious to add to Apple 😅
@@eddiedsuza Hi again, and thanks for your honesty about ditching Broadlink 😂
Before I do the same would you mind doing me a solid and take a glance at my code to see if I have made some obvious mistakes?
I have deleted the remote functions that I don't need.
{
"bridge": {
"name": "Homebridge 4118", (This was automatic)
"username": "0E:xx:xx:E8:41:18", (this was automatic)
"port": 51991,
"pin": "265-xx-220" (Here I have added my HomeKit number from Homebridge main page)
},
"description": "Homebridge",
"accessories": [],
"platforms": [
{
"platform": "BroadlinkRM",
"name": "Broadlink RM",
"hideScanFrequencyButton": false,
"hideLearnButton": false,
"hideWelcomeMessage": false,
"hosts": [
{
"address": "192.168.3.xxx”, (this I have copied from the log in Homebridge at restart)
"mac": "ec:xx:xx:0c:ce:b1", (this I have copied from the log in Homebridge at restart)
"isRFSupported": false
},
{
"address": "192.168.3.xxx”, (this I have copied from the log in Homebridge at restart)
"mac": "ec:xx:xx:0c:ce:b1", (this I have copied from the log in Homebridge at restart)
"isRFSupported": true,
"isRM4": true
}
],
"accessories": [
{
"name": "TV On/Off",
"type": "switch",
"data": {
"on": "26002003…",
"off": "26006801…”
}
},
{
"name": "KonkaTV",
"type": "tv",
"data": {
"off": "260068016…”,
"on": "2600200362…”,
"remote": {
"select": "2600c80062631032…”,
"arrowUp": "260040016263…”,
"arrowDown": "2600a00062631…”,
"arrowLeft": "2600c80061640…”,
"arrowRight": "2600c80062631…”
},
"volume": {
"up": "2600c80061640f33…”,
"down": "2600f0006263…”
},
"inputs": [
{
"name": "INPUT 1",
"type": "hdmi",
"data": "2600500062…”
}
]
}
}
]
}
],
"platform": "BroadlinkRM" (This comes in automatically)
}
Hi, sorry for my english. I bought the new Hoobs 4 but can't get the Broadlink plug-in to work. I followed the video carefully and waxed solutions on all groups but nothing. Hoobs automatically recognizes my two Broadlink devices but any changes I make to the configuration don't change things; could you help me? Thank you
The reason its not saving is there could be an error with your configuration format. May be missing a comma or a bracket. Try this link to find the error in your config jsonlint.com/
@@eddiedsuza Thanks for the reply. json is ok. perhaps the problem is that something has changed in version 4.4.8, including the name of the platform which in fact I do not recognize; could you show me the correct configuration of the plugin with the new version?
When installing the plugin it does not load the broadlink platform but this message comes out: No accessories have been added to the "undefined" platform config.
@@piergiorgio583 Here's the link to a detailed Configuration provided by the developer github.com/kiwi-cam/homebridge-broadlink-rm/blob/master/config-sample.json
Hey, before i buy this. Could you tell me if the plug ins also give u the ability to add RF devices to homekit? I already have an IR blaster, but i need to expose the RF device in my house into homekit and this is the only device i found that can do it… will this work???
My device is a projector screen controller… it has 3 buttons, up down and stop, nothing complicated but will this be possible?
Yes it is possible. Simple to setup by using the HEX codes. Again - you have to test it ... But i believe its quite possible which can be done by classifying each of the buttons as switches as long as the limits are programmed.
i have problem with air conditioner set up . after get the air conditioner learn code save and restart the homebridge the broadlink fails
Hello Calvin ... That's a config formatting error. Please check this link jsonlint.com to fix the issues
@@eddiedsuza yes I check ready but still fails … where to get basic formatting.. I get the original formatting I think didn’t work properly.
Hi Eddie another great video, how can i control states? By example i have automations like “good night” to turn off all the devices, but if my tv configured with briadlink plugin is turned off by the time i execute the automation it gets turned on. Seems like the on/off hex codes works for on or off.
Hey Eduardo - firstly check the HEX codes for ON & Off (if its not inverted). Now with regards to the automation - I do have a Samsung TV that is connected with homekit via the plugin - at times when I run the Good Night Scene - it turns on when its state was off. In all honesty - not sure why as well...99% it works but 1% for some reason it turns on :P
Hi Eddie great video, and I need your help, I already added a TV by following your tutorial but now I want to add another device and i don’t want to mess up the json config, so what do I need to write to add a device below the tv? Thanks in advance
Hello Rodrigo - please use this link to check the config jsonlint.com/ or email me at eddie@buildasmarthome.org to assist
hey Eddie great video I'm having a little issues per home bridge everything is connected nicely but when I click the learn button in home kit I do not get the orange light thus a inability to get hex codes any ideas ?
Is the lock device disabled ? please check in the device settings - check the 04min mark of the video
@@eddiedsuza yes it’s disabled I got it to finally working only issue now is the device randomly because undiscoverable to homebridge and it’s a pain to get it to connect back to it
Hi Eddie, thanks so much for your sharing about hoobs homebridge. It is amazing. I will find one.
Have fun! Cheers
Hi Eddie, I have linked a RF wall switch to Broadlink thru Hoobs and it is working well. However, the switch status will appear to be different on Homekit, if I have on/off the RF wall switch directly without going through Homekit. Is there a way to disable the switch status on Homekit, so that Homekit will not show the status as on, when the switch is manually off and vice-versa?
The status of the devices is received from the plugin as that pings the devices to get the last state of the device. Within Apple you won't be able to disable the state the device.
Have you tried swapping the HEX code of ON & OFF ... so it reflects correctly in Homekit ?
Are the air conditioners that are Smarlife using the IR of the positive (tuya), are they imported into Homekit, using the integration by Homebridge? do you have a plugin for this?
For Tuya devices - use this plugin www.npmjs.com/package/@milo526/homebridge-tuya-web
Hi Eddie, in first place place, thanks for your videos, they're really useful!!!!!
I'm having some troubles following the steps on this video, when I make visible de RM4PRO, and a TV, my lights in the homebridge are not reachable, I think that's is something with the "accessories" key, but I can not save it, any ideas???
Regards and stay very safe mate!!
Hello Niko - from your description it looks like a configurations. Can you use this link to check your config jsonlint.com/ or email me at eddie@buildasmarthome.org to assit. Cheers
@@eddiedsuza Hi Eddie, how are you? Thank you very much for answering, youtubers do not always answer, much less so fast!
I tell you that I was able to solve the integration issue, it turns out that it was a very small detail, when I put the MAC Address of the RM4 in the HomeBridge config, the json was fine, I had checked it before putting it, the issue is yes or if you have to put it in lowercase and I had it in uppercase. This caused HomeBridge to give an error that the plugin prevented the entire instance from lifting ...
Now it remains for me to configure the temperature sensor, which until now I can see it in both homebridge and Apple Home, but it always marks 00º and in Homebridge it gives an error about "relative humidity", but in the week I will be reviewing it.
Again, thank you so much! Hug and stay safe !!
@@NikoVerano Please check the pinned comment for the Temperature sensor configuration. Cheers
@@eddiedsuza Hello mate, it turns out that my config was fine, the problem is that the version of the RM4 Pro that is sold in my country comes with a cable without sensor, that cable is sold separately, the model is HTS2, so until I have the cable will be without a temperature sensor ... Thanks for everything !!!
Hi Eddie so I have a tuya ir remote and I was wondering if you can tell me it will work with the broadlink plugin.
Hello Ahmed - currently remotes are not support by the plugin - please visit this link to know which devices are supported - broadlink.kiwicam.nz/#accessories
Broadlink setup, especially AC and TV hex codes, consume a lot of space in config.json, and it seems the size of file is limited to 128 kb. My reached it's maximum size, if i want to add more definitions i need do delete something and free space. Used HOOBS UI and ssh, same result - empty config after saving. Any ideas how to define bigger size (32bit file system allows 4 Gb)?
Thanks for the info! What i have heard is that HOOBS 4 will resolve this issue. Currently there is no work around
Hello Eddie, please can i have help i have this error [Broadlink RM] [ERROR] Learn Code (Couldn't learn code, device not found) the learn bouton go down and no orange led on the broadlink do you have an idea ?
Oh boy .... You'll need to be patient when learning codes ... Point the remote in the direction of the broad link hub.
It doesn’t work i remove the host ip from broadlink now the orange bouton work in orange but can’t learn anything..
Hi, I have followed all the steps however when I click learn or scan freq, the log is showing "Learn Code (Couldn't learn code, device not found)". No orange light is appearing on my broadlink rm4 pro either. The "lock" is off also on the app. I can't seem to find anything online similar. PLEASE HELPPP thank you
Hey Oliver - please check the IP configuration that you have populated in the plugin config. And also make sure you reserve the IP address in your router settings.
@@eddiedsuza Sorry I’m relatively new to this. How do I do both those things? It feels like I’ve tried every troubleshooting method ever ahaha
Thanks so much for your response, look forward to hearing from you
@@pushthru1 within the broadlink app > go to settings > and you should find the assigned IP and then update the Homebridge config with that information.
@@eddiedsuza I have set these and it still doesn’t work unfortunately
Hii! Any change it might work with Tuya??
If the device can be controlled by RF or IR then you can give it a shot
Hi Eddie, please advise does this plugin can be use on RM pro 1 & RM pro +?
You will need to test it by providing the IP address in the plugin configuration..
If you turn the TV off with the remote, is the state of TV in Home app is Off, or it is still On ? Can we sync the state of the tv in Home app like official Homekit TV ?
The sync & refresh is automatic
@@eddiedsuza my tv state doesn’t sync if I turn it on/off with the remote
Hi Eddie, did you take the Mac and Ip address from The app (Broadlink) or from your network connection. I did all the process to start but didnt show the welcome message. can you help me?
I took the information from the Broadlink app which will be same in your router as well
Hi Eddie, i installed the configs for the TV and works fine on my homebridge, however i want to ask what is the inputs section in the code? i read the documentation but didnt get it im assuming that i can add other buttons from the remote but couldnt get around it, also is there an option to change the layout of the apple remote on my iphone? and add new buttons? not just the arrows as i want to change channels and open the home icon on my tv to go through the settings for a samsung tv
Andrew there is no option to change the apple remote layout as it is default based on the TV device type.
Is there a way to configure Broadlink TC2 on this?
You'll need one of Broadlinks hubs to connect the TC2 and then use the plugin to expose it to Homebridge / HomeKit
@@eddiedsuza already done that. but i don't have the RF codes needed for On/Off the TC2 light switch. (it's RF and not IR) so how to get those RF codes?
@@StaRipper You'll need to enabled the learning mode in the plugin. And capture the HEX codes . Once done - you'll need to select the device type and configure the plugin.
@@eddiedsuza Cannot do learning or scanning for a RF that is sent from the RM Pro itself!
@@StaRipper please refer to this link enable RF support in the plugin configuration broadlink.kiwicam.nz/#device-discovery & use this to configure a switch broadlink.kiwicam.nz/#switch
Can i use it with Aqara hub instead of hoobs hub?
Hello Martin - its not possible as you will need to install and configure a plugin. I am not sure if the Aqara hub allows 3rd party plugins.
How I can find the IP address of my RM4? I looked everywhere in the app but can’t find it!
You can find it in your router settings under DHCP
can i add 2 broadlink? i have rm3 that work great, i got another one RM4c can i add it too?
Yes, you can add to Devices and you will need check with the dcoumentaiton link which is in the description about RM4c
Dont forget to like & subscribe.. cheers
Hi. I am getting an error in log file
1. Parameter missing “accessory” on line 1
2. If I add “accessory” : “tv”, it says plugin not found in the config.json
Please guide.
Try uninstallating and do a reinstall to try configuring the plugin again
@@eddiedsuza hi. I just tried. Still same error
Quote
{
"accessories": [
{
"accessory": "TV",
"type": "switch",
"name": "TV on/off",
"data": "2600500000012a9213121312133613131213121312131212133613371312133613371336133713361313121312131236131312131213121312371336133713121237133613371336130005270001294913000d05000000000000)"
}
],
"bridge": {
"pin": "721-01-213",
"username": "0E:E4:56:F9:88:3B",
"advertiser": "bonjour-hap",
"port": 56234,
"name": "Homebridge 13F2"
},
"platforms": [
{
"hideLearnButton": false,
"platform": "BroadlinkRM",
"hideWelcomeMessage": true,
"name": "Broadlink RM",
"hideScanFrequencyButton": true
},
{
"platform": "config",
"name": "Config",
"port": 8581
}
]
}
Unquote
Is it compatible with Home Assitant? The TV remote like channel up etc. ?
Hello Onder - I did see a video online where someone integrated Broadlink with HA. But once the device / plugin learns the code - you can practically get the whole control via the remote app in apple.
Is there any other way of using it with Apple tv as a hub and not the hoobs?
I have 5 sonoff switches connected straight to homekit app do you think there's a way I can set it up too to control my AC?
Youll need the HOOBS or Homebridge to interact with the Broadlink .... youll the need the plugin to do all the interactions
@@eddiedsuza so you say that I can still use both the hoobs and the Apple TV as hub?
@@ofekrdt3621 The Apply TV will be your Hub to interact with all devices on the network and also run your automations.
The HOOBS will only expose the not certified devices to Apple Homekit.
Hi Eddie, I was watching some tutorials about this here, I'm using Hoobs too but I found out that I have to add the RM4 Pro without using the broadlink app, Is there a way to use it along with hoobs and alexa?
Thanks in advance!
Hello Alonso - you will need use the app to add the device to your 2.4Ghz network and then once you are prompted to add it to a room. You can kill the app.
Then from here the device is on your network and you can add it to HOOBS and your home automation
@@eddiedsuza Not possible to use the app and Hoobs at the same time?
@@ahatman Oh yes you can use both at the same time.
Hey Bro, work the Broadlink with a Dyson AM07 with
IR Controll?
Try this plugin plugins.hoobs.org/plugin/homebridge-dyson-pure-cool or you will need to teach the broad link device all of the commands
Thank you very much for the video and your effort! Works perfect!
Just one question:
I have already all the Hex-Codes in den BroadLink App on my Iphone. So all devices are working fine with App. Is there solution to read these codes? Otherwise I have to redo all again (6 devices).
Thanks for your support!
Hello Frank .. I am not aware of another solution to retreive the codes.
Is there a way to configure the code so that HomeKit recognizes the tv is on when it’s turned on by the original remote instead of through HomeKit. I will turn on the tv with the original remote and HomeKit does not recognize the tv being on. If possible any guidance would be appreciated. Thanks!
Hello Thomas - Please check your config if it has to pick up the state of the device.
@@eddiedsuza hi Eddie thanks for following up. My configuration mimics what you did in the tutorial except I’m only using the on and off switches. In the homebridge documentation I don’t see any keys that allow me to pick up the state of the device. Maybe I’m not understanding but any suggestions would be appreciated.
@@TeeJayKay14 Another fix I used - is kill the home app and restart the Homebridge service .... May work 😁
Hello, fantastic video, after 4 days I have managed to make almost everything work, I challenge you to try to control a specific device that uses only RF signals, not a single person in the whole world has been able to operate an RF device with any of the available plugins. You can try controlling a projector screen or blind, many of them works with RF signals. If you succeed, please tell us how you did it, many people in the world will be very grateful.
Challenge accepted ! But for residencial purposes - alot come with IR. Do you have a speicific RF device that i can use as a baseline and investigate ? Let me know
@@eddiedsuza Hi Eddie, this is exactly what I'm needing now. I have a bunch of Hunter ceiling fans and they are controlled only by an RF RC, do you know if the plug-in might support this as well?
@@nicolasgonzalezduart Yes it does ... Please follow this link broadlink.kiwicam.nz/#fan
Hi does this work with normal homebridge
Yes it does
@@eddiedsuza hi Eddie I’ve just tried this a couldn’t get it working I’m really confused :/
is it also useful for broadlink rm4c?
You will need check with the dcoumentaiton link which is in the description about RM4c
Dont forget to like & subscribe.. cheers
Unfortunately I need help adding IR remote using the Broadlink App & this wasn't helpful. 😢
Have you enabled the learn function ... point the remote to the broadlink hub to learn the commands. Its a slow and painful process
support Tuya smart WIFI IR remote ?
I love tuya 😅
You'll to test it and let us know if it works ....
I dont have any Tuya devices.
If I can’t scroll with it like up down left right I don’t want it
Oh ! Yep theres some work involved in the configuration.
I keep getting the following error:
[ERROR] Learn Code (Couldn’t learn code, device not found)
Please check the device ip address and make sure it’s reserved in the routers dhcp settings
@@eddiedsuza done and done. Same issue unfortunately
After configuring the plugin (mac address, ip address) my hoobs service crashes and the log reads
Error: listen EADDRINUSE: address already in use :::51826
Any ideas on what can this be?, clearly the plugin is somehow conflicting with the hoobs port :/
Try Restarting the server
Eu posso usar um broadlink rm4 mini
Sim pode usar
Assim cara, eu não consegui, mas comprei um rm3 mini que se dizia compatível
Mas assim, eu fiz no homebridge e não deu, deu como erro de json
Vou ver o seu vídeo de json, e outra, desbloqueia seu Instagram pq eu não tenho acesso pq só tenho 14
Very Good. Thanks!!
Thank you too!
I added it to the accessories section.
Thanks!
hi i have 2 device Broadlink 1 mini 1 rm4 pro what can I do only one is working
Please paste your configuration to assist you
@@eddiedsuza thank you 🙏 now good working 😂
Does it support divices statuses
yes it does !
Hi Eddie, very good video, but I'm facing some issue learn button doesn't work with me at all
by the way am a new user for this system
this is my log:
9/5/2023, 10:27:24 PMBroadlink Rm Pro BridgeBroadlinkRM[ERROR] Learn Code (Couldn't learn code, device not found)
9/5/2023, 10:27:24 PMBroadlink Rm Pro BridgeBroadlinkRM[ERROR] Learn Code (Couldn't learn code, device not found)
9/5/2023, 10:27:24 PMBroadlink Rm Pro BridgeBroadlinkRM[ERROR] Learn Code (Couldn't learn code, device not found)
9/5/2023, 10:27:28 PMBroadlink Rm Pro BridgeERROR[Broadlink Rm Pro Bridge 7D02@On] The write handler for the characteristic 'On' on the accessory 'Learn' was slow to respond!
9/5/2023, 10:27:28 PMBroadlink Rm Pro BridgeERROR[Broadlink Rm Pro Bridge 7D02@On] The write handler for the characteristic 'On' on the accessory 'Learn' was slow to respond!
9/5/2023, 10:27:28 PMBroadlink Rm Pro BridgeERROR[Broadlink Rm Pro Bridge 7D02@On] The write handler for the characteristic 'On' on the accessory 'Learn' was slow to respond!
9/5/2023, 10:27:34 PMBroadlink Rm Pro BridgeERROR[Broadlink Rm Pro Bridge 7D02@On] The write handler for the characteristic 'On' on the accessory 'Learn' didn't respond at all!. Please check that you properly call the callback!
9/5/2023, 10:27:34 PMBroadlink Rm Pro BridgeERROR[Broadlink Rm Pro Bridge 7D02@On] The write handler for the characteristic 'On' on the accessory 'Learn' didn't respond at all!. Please check that you properly call the callback!
9/5/2023, 10:27:34 PMBroadlink Rm Pro BridgeERROR[Broadlink Rm Pro Bridge 7D02@On] The write handler for the characteristic 'On' on the accessory 'Learn' didn't respond at all!. Please check that you properly call the callback!
9/5/2023, 10:27:34 PMBroadlink Rm Pro BridgeBroadlinkRM[ERROR] Learn Code (Couldn't learn code, device not found)
9/5/2023, 10:27:34 PMBroadlink Rm Pro BridgeBroadlinkRM[ERROR] Learn Code (Couldn't learn code, device not found)
9/5/2023, 10:27:34 PMBroadlink Rm Pro BridgeBroadlinkRM[ERROR] Learn Code (Couldn't learn code, device not found)
9/5/2023, 10:27:37 PMBroadlink Rm Pro BridgeERROR[Broadlink Rm Pro Bridge 7D02@On] The write handler for the characteristic 'On' on the accessory 'Learn' was slow to respond!
9/5/2023, 10:27:37 PMBroadlink Rm Pro BridgeERROR[Broadlink Rm Pro Bridge 7D02@On] The write handler for the characteristic 'On' on the accessory 'Learn' was slow to respond!
9/5/2023, 10:27:37 PMBroadlink Rm Pro BridgeERROR[Broadlink Rm Pro Bridge 7D02@On] The write handler for the characteristic 'On' on the accessory 'Learn' was slow to respond!
9/5/2023, 10:27:43 PMBroadlink Rm Pro BridgeERROR[Broadlink Rm Pro Bridge 7D02@On] The write handler for the characteristic 'On' on the accessory 'Learn' didn't respond at all!. Please check that you properly call the callback!
9/5/2023, 10:27:43 PMBroadlink Rm Pro BridgeERROR[Broadlink Rm Pro Bridge 7D02@On] The write handler for the characteristic 'On' on the accessory 'Learn' didn't respond at all!. Please check that you properly call the callback!
9/5/2023, 10:27:43 PMBroadlink Rm Pro BridgeERROR[Broadlink Rm Pro Bridge 7D02@On] The write handler for the characteristic 'On' on the accessory 'Learn' didn't respond at all!. Please check that you properly call the callback!
Hello Ahmad .. with the learn button ... Once you turn it on, point the remote to the broadlink hub and press the button you want it to learn. If its not captured within a set period of time - you will see the above the error.
@@eddiedsuza hello Eddie thank you for replay my comment
I try and still not working with me
the LED in the brodlink device doesn't give my any lights
i think my broadlink device is not connecting to the Broadlink RM Bridge
please help me with tis issue 🥲
@ahmadbaqer8943 please check the local control is enabled. You have to be patient when capturing codes
@@eddiedsuzawhere can i find the local control
Do you mean “lock device” ?
It’s disable and still not working
why can not support rf315mhz device Broadlink rm pro4
Can not show learn code
Well try using documentation of the plugin
Has someone archieved to scan an RF frequency? Is impossible for me.
Hello Pablo - I dont have any device but if there is an issue, try reaching out to the developer for assistance
what about multiple broadlink devices?
Here is the config which has to be added to the HOST section and in the description - there is link to the detailed configuration.
"hosts": [
{
"address": "192.168.86.99",
"mac": "24:df:a7:e4:&b:95",
"isRFSupported": true,
"isRM4": true
},
{
"address": "192.168.86.99",
"mac": "24:df:ab:e4:&b:95",
"isRFSupported": true,
"isRM4": true
}
]
@@eddiedsuza can this device control my ir curtain and integrate it into homekit?
@@bonk841 Currently the plugin does not support this accessory. Youll need to check with the developer - here is the link to the available accessories - broadlink.kiwicam.nz/#accessories
Make a video using it to control an ac!
Will do ! Once i Have an AC :P
hi, eddie great video !!
I add my tv and all goes grat, dut I have a doubt how I add another device (my sound system that it's in the same room as the tv)
I try adding some extra code in the same code that is my tv but it doesn't work
can you help me, please?
it looks like this
{
"platform": "BroadlinkRM",
"name": "Broadlink RM",
"hideScanFrequencyButton": false,
"hideLearnButton": false,
"hideWelcomeMessage": false,
"accessories": [
{
"name": "Proyector",
"type": "tv",
"data": {
"on": "learned code",
"off": [
{
"data": "learned code",
"sendCount": 2,
"interval": 0.3
}
],
"remote": {
"playPause": "learned code",
"select": "learned code",
"arrowUp": "2learned code",
"arrowDown": "learned code",
"arrowLeft": "learned code",
"arrowRight": "learned code"
},
"volume": {
"up": "learned code",
"down": "learned code"
}
},
"accessories1": [
{
"name": "Bose",
"type": "speaker",
"data": {
"on": "learned code",
"off": "learned code"
},
"remote": {
"playPause": "learned code",
"arrowUp": "learned code",
"arrowDown": "learned code"
},
"volume": {
"up": "learned code",
"down": "learned code"
}
}
]
}
]
}
Try this ...
{
"platform": "BroadlinkRM",
"name": "Broadlink RM",
"hideScanFrequencyButton": false,
"hideLearnButton": false,
"hideWelcomeMessage": false,
"accessories": [{
"name": "Proyector",
"type": "tv",
"data": {
"on": "learned code",
"off": [{
"data": "learned code",
"sendCount": 2,
"interval": 0.3
}],
"remote": {
"playPause": "learned code",
"select": "learned code",
"arrowUp": "2learned code",
"arrowDown": "learned code",
"arrowLeft": "learned code",
"arrowRight": "learned code"
},
"volume": {
"up": "learned code",
"down": "learned code"
}
},
"accessories1": [{
"name": "Bose",
"type": "speaker",
"data": {
"on": "learned code",
"off": "learned code"
},
"remote": {
"playPause": "learned code",
"arrowUp": "learned code",
"arrowDown": "learned code"
},
"volume": {
"up": "learned code",
"down": "learned code"
}
}]
}]
}
@@eddiedsuza thanks i works
Thank you very much, you are great :) I follow all your videos! could you explain how to have multiple houses with the same hoobs My idea is to be able to control another device that is in my ewelink account but is in another house and thus be able to save and not buy another hoob
@@renejr02 you can have one HOOBS instance to control multiple homes. Each Home will need a HOOBS instance of its own. Then on your Home App - youll have to create a new HOME and add devices to each one of them. Then you will be able to control them.
@@eddiedsuza thanks you are really good
Why are you jumping Eddy so fast, show damn edited script man :)
Lolz.... thats the slowest i can go. Cheers
Hi Eddie, I followed the instructions on your video, but I'm still getting "BroadlinkRMNo accessories have been added to the "undefined" platform config" no additional codes to add to HomeKit using Hoops. Hoping you can help.
"accessories": [
{
"name": "blind",
"type": "window-covering",
"persistState": true,
"totalDurationOpen": 42,
"totalDurationClose": 42,
"data": {
"open": "260064000e290f282b0c0f292b0c0f290f280f22a0d0f290f2.....",
"close": "260064000e292b0c2b0d0f282b0d0f280f290f280f2900f2a0....",
"stop": "260064002a0d0f282b0d0f282b0c0f290f280f290f280f292a0...."
}
}
],
"platform": "homebridge-broadlink-rm-pro"
}
please check out this link ro fix the issue and let me know if it worked. github.com/kiwi-cam/homebridge-broadlink-rm/issues/568