Olá. Vendo seu problema e sua solução, pensei... Porque não fazer o isolamento do bico de corte na porca de fixação à pistola e manter o alongador original. Onde vc comprou esse alongador ceramico?
I ended up doing something similar with an adapter nut that insulated it. The problem is that because the tube is your laser focus you can’t just add material because you only have about a inch of play that you need to have to adjust the laser focus in or out.
Is that the laser welder/cutter/cleaner? I can’t remember the brand name. I have the same Vietnamese brand THC for my plasma system (the arc voltage unit) and it works well. I assume you are running Mach 3?
Yes it is a 4in1 laser system, here is a video of the unit: Laser Cut Parts for the hobby shop! 2kw Laser 4 in 1 Welder & Cutter machine cutting parts! Part 1 th-cam.com/video/hfvYZB9rimo/w-d-xo.html. Yes I’m running Mach3.
@@celiougo English Translation: “Can you explain how you adapted the THC for height control (focus), without the need for reading and adjustments?” The unit I used puts out up and down signals that I just plugged into the breakout board that Mach3 uses those signals to move the torch up and down. The potentiometer on the THC sets the height off the material.
Great work! I was looking for someone who did this months ago and it works great, amazing
Olá.
Vendo seu problema e sua solução, pensei...
Porque não fazer o isolamento do bico de corte na porca de fixação à pistola e manter o alongador original.
Onde vc comprou esse alongador ceramico?
I ended up doing something similar with an adapter nut that insulated it. The problem is that because the tube is your laser focus you can’t just add material because you only have about a inch of play that you need to have to adjust the laser focus in or out.
What is kerf width? What thickness material are you cutting? Nice job.
Kerf is at .009” right now, might be smaller as I haven’t tuned it in yet. This was cutting 11ga at 1500 watts.
@@kwrigg Wow, that is small. That is about as thick as you can do with fine cut consumables on a Hypertherm, but a much smaller kerf.
Is that the laser welder/cutter/cleaner? I can’t remember the brand name. I have the same Vietnamese brand THC for my plasma system (the arc voltage unit) and it works well. I assume you are running Mach 3?
Yes it is a 4in1 laser system, here is a video of the unit: Laser Cut Parts for the hobby shop! 2kw Laser 4 in 1 Welder & Cutter machine cutting parts! Part 1
th-cam.com/video/hfvYZB9rimo/w-d-xo.html. Yes I’m running Mach3.
Vc pode expor como adpatou o thc para controle de altura(foco), sem a tenção para leitura e ajustes.
@@celiougo English Translation: “Can you explain how you adapted the THC for height control (focus), without the need for reading and adjustments?” The unit I used puts out up and down signals that I just plugged into the breakout board that Mach3 uses those signals to move the torch up and down. The potentiometer on the THC sets the height off the material.