Thank you so much! I literally was about to chuck this machine, until seeing your video! I ran out and bought magnetic buttons ($ Tree) Placed 6( they stuck together ) on top of the larger non working magnet and Hallelujah , back in business! Thank You, you are a Genius!
Thank you very much, I used a magnet from my fridge and used it to move the floater magnet up and now my brewer works. I was about to throw it out. I hope that it continues to work.
French follows. Actually when the original magnet is becoming too weak there is really a simple solution: remagnetize it! How ? That's just what I did after looking at several videos treating the same subject: water level sensor stuck to «no water». To remagnetize the little magnet (no need to remove it from water container) I used an old «bulk tape eraser» from Realistic (old Radio Shack I think) except I didn't use it in erase mode (in erase mode you move the electromagnet slowly away from the piece you want to erase i.e. cassette tapes). Practically any good electromagnet will do. Turn it on and off (1 sec is more than enough) and your Tassimo is back in business! OK now in French: il suffit de remagnétiser le petit aimant dans le réservoir. Pas besoin de l'enlever du réservoir. Aucun démontage requis. N'importe quel electro-aimant devrait faire l'affaire. J'ai utilisé un «effaceur de rubans magnétiques» de Radio Shack. Approcher l'électo-aimant aussi près que possible de l'aimant du réservoir. Une courte exposition au champ magnétique de l'électro-aimant suffit à le remagnétiser. Bon, je suis ingénieur en électronique. Ça aide :-)
I believe this is the correct solution because having the 2nd magnet will show that there is water in the container even if it has finished and if you were to run the machine without water???
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค2]](http://i.ytimg.com/vi/pZbsSDRrmXA/mqdefault.jpg)
Thank you so much! I literally was about to chuck this machine, until seeing your video!
I ran out and bought magnetic buttons ($ Tree)
Placed 6( they stuck together ) on top of the larger non working magnet and Hallelujah , back in business! Thank You, you are a Genius!
Thank you very much, I used a magnet from my fridge and used it to move the floater magnet up and now my brewer works. I was about to throw it out. I hope that it continues to work.
After months searching the internet I almost bought a whole new machine! My friend you have saved me £€$ for that I owe you a coffee!!
Thank you!!! Saved my coffee maker....Mine was just stuck, someone misplaced the little magnet lid and it kept the magnet stuck at the very bottom.
Merci AmazingBobby! Je vais utiliser ca pour mon lave vaisselle. Sauf que tu as mentis, les aimants ne sont aps 1,25$, ils sont 4$!
Thanks ! it worked perfectly. Really useful the video.
French follows. Actually when the original magnet is becoming too weak there is really a simple solution: remagnetize it! How ? That's just what I did after looking at several videos treating the same subject: water level sensor stuck to «no water». To remagnetize the little magnet (no need to remove it from water container) I used an old «bulk tape eraser» from Realistic (old Radio Shack I think) except I didn't use it in erase mode (in erase mode you move the electromagnet slowly away from the piece you want to erase i.e. cassette tapes). Practically any good electromagnet will do. Turn it on and off (1 sec is more than enough) and your Tassimo is back in business!
OK now in French: il suffit de remagnétiser le petit aimant dans le réservoir. Pas besoin de l'enlever du réservoir. Aucun démontage requis. N'importe quel electro-aimant devrait faire l'affaire. J'ai utilisé un «effaceur de rubans magnétiques» de Radio Shack. Approcher l'électo-aimant aussi près que possible de l'aimant du réservoir. Une courte exposition au champ magnétique de l'électro-aimant suffit à le remagnétiser.
Bon, je suis ingénieur en électronique. Ça aide :-)
I believe this is the correct solution because having the 2nd magnet will show that there is water in the container even if it has finished and if you were to run the machine without water???
Thanks! Fixed the problem!
yasssssss it works!!!! thank youuuuuuu dude!
Bravo papa! 14k vues🤣
Ton père c le meilleur 😁💪👌👍
tu veux dire 19k bravo papa
Thank u mine started to work
Merci Michel!!!!
Robert! Scuse 🤪
What size of magnet did you buy
How about the spritz light on?
Mine is not heating water any thoughts
sorry to hear that. the trick is only for red light on...