What’s that story about clone kess 2 and check sum and ecu bricking? I was planning to use kess 2 to read file, delete egr / dpf using ASD and write file back on ecu using kess 2 clone? It’s for bmw f30? Is that safe to do? Or do i have to load file in this program and do checksum correction
Don 't use kessv2 on f30, you will brick the ecu... Kess V-2 for edc17 is not good... Too old.. use a KT200II or pcm tuner.. or better than all, autotuner, flex, dfox
In the car ECU need write file with correct checksum. But if softwares (Ksuite, FGTech Galletto, MPPS or other) can calculate self checksum, then not need manually corrected checksum.
Hi, do u have the driver for ecu17ec44? My ecm titanium does not have that one and I can not download it.
Downloading drivers for ECM Titanium can just with original software.
what if they not found Driver on 02:20 ? May this a Problem?
chechsum RED no green ?
If red color then not correct checksum, when green color - checksum ok.
@@SimpleHOW thanx bro 👏🏻👏🏻👏🏻
What’s that story about clone kess 2 and check sum and ecu bricking? I was planning to use kess 2 to read file, delete egr / dpf using ASD and write file back on ecu using kess 2 clone? It’s for bmw f30? Is that safe to do? Or do i have to load file in this program and do checksum correction
Don 't use kessv2 on f30, you will brick the ecu... Kess V-2 for edc17 is not good... Too old.. use a KT200II or pcm tuner.. or better than all, autotuner, flex, dfox
@@alexandrupana800 Perfect answer 👍
Hello you can help to my how can i check the car whp after remap? how can i calculat it or some programs are calculate automaticli?
All programs calculate the checksum, but not for all ECU. First, check if your program can calculate the checksum for this ECU.
Only a question if i flash with galletto 1260 and tune the file from ecm titanium it will be problem for ecu?
No, not have problems ☺
@@SimpleHOW thanks
is it necessary to choose the correct driver? Or does not it matter? Thank you
Need choose driver as you ECU, but if not find that, than can try similar drivers.
@@SimpleHOW ok thank
@@SimpleHOW oh okay i Found a Solution Thanks, but another quastion, showed a software error when i choose a wrong driver?
so which did you upload to car? CS ok file Or the CS ok SELECTED file?
Is the same. One file is created automatically and the other one manually
Which of the files am I supposed to write into the Ic ?
Among the modified ones
In the car ECU need write file with correct checksum. But if softwares (Ksuite, FGTech Galletto, MPPS or other) can calculate self checksum, then not need manually corrected checksum.
yes but the CS OK or the CS OK SELECTED?@@SimpleHOW
@@-vis4r576 For compare, "cs ok" software self calculate and "cs ok selected" manual select driver for cs calculated.
Can I use this software on motorcycle ?
I not try, but You can try 🙂
Thank you friend ! Thank you very much. Good good channel.
Thanks
how do you make dpf off files ?
What car, engine and years?
@@SimpleHOW every car , edc16
@@SimpleHOW what program did you use ?
@@EvoGTR33 with program just little car can do it, other do it with WinOLS.
Good job .
Thanks ☺
Dear will you provide me this software
I buy from Ali, link in description.
Good good job.👍
Thanks 👍