i did this - didnt disassemble so far - just cut the wires - soldered a new battery onto the wires - covered joints with heatshrink - worked and with no issues
Hi! you need to swap the Bms ( battery management system ) from old battery to new one you want to place. So you can have same wires. Blue wire is needed for the Motherboard to talk with the battery ( to check Temperature, cicles and other things ). Don't forget to like and subscribe if it was helpful! Have a nice day!
Thanks for making and sharing this video. I was interested to see what was inside the transmitter unit and what kind of electret was being used. Cheers! 😀👍
HI! simply the BMS, battery side, is connected to the positive pole and the negative pole. These 2 connections must be unsoldered and then re-soldered on the new battery being careful to respect the positive and negative pole on the appropriate connectors. And that's it! don't forget to like and subscribe if it was helpful!
Thanks for this video but could you just cut the leads near the battery terminals and re solder a new battery there, saves taking the pcboard out. But again thanks for the video
Sure, but usually when I open some tech stuff which is not so common, i prefer show all board. It can be helpful to someone else which have other issues, to figure out how it's made inside and how to fix it. Thank you for commen don't forget to like and subscribe if you liked the video to be update when other video is released. Have a nice day Paul!
Unfortunately, at the moment original battery replacement can't be found, but you can use the battery of Apple Watch series 3 42mm ( ebay.us/t2cuNG ) it have more juice and fit very well inside the case. You need to swap the bms ( charger circuit ) from the original to the new one. I hope it was helpful! let me know if you fixed it! Don't forget to like and subscribe if it was helpful ;)
Hi! Unfortunately i don't know how to find the clamp replacement. Maybe better search for old røde wireless to buy on ebay at low price to gather pieces!
Hi, you can find all items I use in the description of the video. in this case i used the Hakko tweezers ( ebay.us/KKBwmE ) with this pair of tips ( amzn.to/3AjDZEK ) Don't forget to like and subscribe if it was helpful! Have a nice day!
Unfortunately, at the moment original battery replacement can't be found, but you can use the battery of Apple Watch series 3 42mm ( ebay.us/t2cuNG ) it have more juice and fit very well inside the case. You need to swap the bms ( charger circuit ) from the original to the new one. Or, you can buy a ready bms battery, from here ( ebay.us/80XgHR ) I hope it was helpful! let me know if you fixed it! Don't forget to like and subscribe if it was helpful ;)
Thank you Israel! unfortunately, at the moment original battery replacement can't be found, but you can use the battery of Apple Watch series 3 42mm ( ebay.us/t2cuNG ) it have more juice and fit very well inside the case. You need to swap the bms ( charger circuit ) from the original to the new one. I hope it was helpful! let me know if you fixed it!
@@oniyaki well, finally the original battery was ok (charges up to 4.2v and cuts out at 3.1v). The IC inside the transmitter is not reading the battery voltage, but it remains 6-7 hrs ON. I will leave the original battery. once again thank you!
hi, sure! you need some tech guy which can desolder and solder a new one charging usb-C port. not so difficult to do. let me know if you fixed it. don't forget to like and subscribe if it was helpful!
Hi! I did it at the end, off camera, when i checked all run smoothly. i Always clean with Isopropyl alcohol the components and Mboard, even in case of "no Clean" flux. I think it's a better job ;) Thank you for mention it! don't forget to like and susbcribe if it was helpful! have a great day!
Thank you! unfortunately, at the moment original battery replacement can't be found, but you can use the battery of Apple Watch series 3 42mm ( ebay.us/t2cuNG ) it have more juice and fit very well inside the case. You need to swap the bms ( charger circuit ) from the original to the new one. Don't forget to like and subscribe if it was helpful ;)
@@kuchesezik hi! Sure...you need to desolder the bms ( battery management system...) from the old Rode battery, take out the bms from the Apple watch battery, and solder the one from Rode, to new battery. Clearly you have to solder the 3 wires from bms, in the same place on the Rode motherboard, and the positive pad bms, with positive pad from new battery. And negative pad with negative pad of course. Don't forget to like and subscribe if it was helpful!
I agree with you. I suppose because it become more difficult to be fixed and chance of break it during the operation are increased, so, more Mic to sell
DJI came out with a new wireless mic. 36 months from now lots of folks will want to see this type of video on the DJI. Thank you!
You are welcome! If i get a Dji mic, i will procees to make a similar video on it. Don't forget to like and subscribe if it was helpful!
Hey Oniyaki, thanks to your advice I repaired the TX module
You are welcome Frank! Thanks for subscribing! I will upload the Rx module in some days 😉
where did you buy the battery from?
i did this - didnt disassemble so far - just cut the wires - soldered a new battery onto the wires - covered joints with heatshrink - worked and with no issues
Very good! don't forget to like and subscribe if it was helpful! have a nice day!
Here you see it in more detail (th-cam.com/video/dmY3dCnwOKY/w-d-xo.html) this is the Version 2 of the Rode Wireless GO
Thanks for the video. I need to change a battery in my Wireless Go 2 mic 🎤
Hi! here the video for the Go 2 version ( th-cam.com/video/dmY3dCnwOKY/w-d-xo.html ) don't forget to like and subscribe if it was helpful! Thank you!
Exactly what I was wondering how to do!
You are welcome! Don't forget to like and subscribe if it was helpful! Thank you!
I found a similar-size battery replacement, but it has just two cables - black and white. Can it still work somehow? Thanks
Hi! you need to swap the Bms ( battery management system ) from old battery to new one you want to place. So you can have same wires. Blue wire is needed for the Motherboard to talk with the battery ( to check Temperature, cicles and other things ). Don't forget to like and subscribe if it was helpful! Have a nice day!
Here you see it in more detail (th-cam.com/video/dmY3dCnwOKY/w-d-xo.html) this is the Version 2 of the Rode Wireless GO
Thanks for making and sharing this video. I was interested to see what was inside the transmitter unit and what kind of electret was being used. Cheers! 😀👍
You are welcome! Don't forget to like and subscribe if it was helpful. More video incoming!
Here you see it in more detail (th-cam.com/video/dmY3dCnwOKY/w-d-xo.html) this is the Version 2 of the Rode Wireless GO
@@oniyaki Cool Thanks ! 😀
@@YoureNowOnTV you are welcome!
Excellent, most helpful, thanks!
You are welcome! don't forget to like and subscribe if it was helpful!
Hey, i really like your content 👏🏼 Do you think the Rode Wireless Pro has the same battery as Go II?
Hi, thank you! I've not already open the Pro, but i think it could have very similar battery
Hi can you fix rode wireless go ll
Is it not turn receiver
Hi! Sure, i can do it. contact me via the info page.
thanks, very helpful)
Thank you! Don't forget to like and subscribe if it was helpful! Soon Rode wireless II video 😎
Here you see it in more detail (th-cam.com/video/dmY3dCnwOKY/w-d-xo.html) this is the Version 2 of the Rode Wireless GO
When my dies can I send them to you for battery replacement? I live in Germany.
Sure, i live in Italy! You can find how to contact me in the info page
Hi ,, can you tell me about change the bms from old battery to new battery
HI! simply the BMS, battery side, is connected to the positive pole and the negative pole. These 2 connections must be unsoldered and then re-soldered on the new battery being careful to respect the positive and negative pole on the appropriate connectors. And that's it! don't forget to like and subscribe if it was helpful!
Here you see it in more detail (th-cam.com/video/dmY3dCnwOKY/w-d-xo.html) this is the Version 2 of the Rode Wireless GO
Thanks for this video but could you just cut the leads near the battery terminals and re solder a new battery there, saves taking the pcboard out. But again thanks for the video
Sure, but usually when I open some tech stuff which is not so common, i prefer show all board. It can be helpful to someone else which have other issues, to figure out how it's made inside and how to fix it. Thank you for commen don't forget to like and subscribe if you liked the video to be update when other video is released. Have a nice day Paul!
@@oniyaki Hi I never thought of that, great video you have a nice day
Here you see it in more detail (th-cam.com/video/dmY3dCnwOKY/w-d-xo.html) this is the Version 2 of the Rode Wireless GO
From where did you get the spare batteries for the RODE ?
Unfortunately, at the moment original battery replacement can't be found, but you can use the battery of Apple Watch series 3 42mm ( ebay.us/t2cuNG ) it have more juice and fit very well inside the case. You need to swap the bms ( charger circuit ) from the original to the new one. I hope it was helpful! let me know if you fixed it! Don't forget to like and subscribe if it was helpful ;)
Thanks for the video 👍 do you know where I can find clamp replacement ?
Hi! Unfortunately i don't know how to find the clamp replacement. Maybe better search for old røde wireless to buy on ebay at low price to gather pieces!
What kind of soldering iron do you use?
Hi, you can find all items I use in the description of the video. in this case i used the Hakko tweezers ( ebay.us/KKBwmE ) with this pair of tips ( amzn.to/3AjDZEK ) Don't forget to like and subscribe if it was helpful! Have a nice day!
where to order spare batteries?
Thank you!
Unfortunately, at the moment original battery replacement can't be found, but you can use the battery of Apple Watch series 3 42mm ( ebay.us/t2cuNG ) it have more juice and fit very well inside the case. You need to swap the bms ( charger circuit ) from the original to the new one. Or, you can buy a ready bms battery, from here ( ebay.us/80XgHR ) I hope it was helpful! let me know if you fixed it! Don't forget to like and subscribe if it was helpful ;)
Thank you foe this video!, where can i buy the battery replacement?
Thank you Israel! unfortunately, at the moment original battery replacement can't be found, but you can use the battery of Apple Watch series 3 42mm ( ebay.us/t2cuNG ) it have more juice and fit very well inside the case. You need to swap the bms ( charger circuit ) from the original to the new one. I hope it was helpful! let me know if you fixed it!
@@oniyaki awesome idea, i will use the old bms module with another battery. Thank you!
You are welcome! let me know if you fix it ;)
@@oniyaki well, finally the original battery was ok (charges up to 4.2v and cuts out at 3.1v). The IC inside the transmitter is not reading the battery voltage, but it remains 6-7 hrs ON. I will leave the original battery. once again thank you!
@@israelsalas4617 if you have chance to reflow the ic magbe it can read the battery. Anyway, good job! 😎
My charging port is broken and it seems some pins were burned but it’s still working but won’t charge, do you think someone can still fix it?
hi, sure! you need some tech guy which can desolder and solder a new one charging usb-C port. not so difficult to do. let me know if you fixed it. don't forget to like and subscribe if it was helpful!
only thing is you need to remove soldering flux after rework with isopropyl alcohol. otherwise great job
Hi! I did it at the end, off camera, when i checked all run smoothly. i Always clean with Isopropyl alcohol the components and Mboard, even in case of "no Clean" flux. I think it's a better job ;) Thank you for mention it! don't forget to like and susbcribe if it was helpful! have a great day!
great video, where can i buy replacement battery?
Thank you! unfortunately, at the moment original battery replacement can't be found, but you can use the battery of Apple Watch series 3 42mm ( ebay.us/t2cuNG ) it have more juice and fit very well inside the case. You need to swap the bms ( charger circuit ) from the original to the new one. Don't forget to like and subscribe if it was helpful ;)
@@oniyaki hello, can you elaborate on how to modify the apple watch connectors to fit the rode, or perhaps even show the process?
@@kuchesezik hi! Sure...you need to desolder the bms ( battery management system...) from the old Rode battery, take out the bms from the Apple watch battery, and solder the one from Rode, to new battery. Clearly you have to solder the 3 wires from bms, in the same place on the Rode motherboard, and the positive pad bms, with positive pad from new battery. And negative pad with negative pad of course. Don't forget to like and subscribe if it was helpful!
Here you see it in more detail (th-cam.com/video/dmY3dCnwOKY/w-d-xo.html) this is the Version 2 of the Rode Wireless GO
My rode mic got wet how do I fix
Hi! You need to open it and clean any trace of oxidation with isopropyl alcohol. Don't forget to like and subscribe if it was helpful!
Can I just buy a wireless mic with batteries that were mean to be replaced instead?
I think it'doesn't works cause need to be paired, not in a normal way. Don't forget to like and subscribe if it was helpful!
Here you see it in more detail (th-cam.com/video/dmY3dCnwOKY/w-d-xo.html) this is the Version 2 of the Rode Wireless GO
Hi where are u from, Can I ask for my rode to be repaired by u haha, help 😂 ill just pay bahaha
Hi, i'm from Italy! What is the problem of your Rode?
you can ask cellphone technician to do that too.. thank me later...
Вот нахрена так делать технику? Была бы на винтах проблем таких с разборкой не было бы
I agree with you. I suppose because it become more difficult to be fixed and chance of break it during the operation are increased, so, more Mic to sell