Adding a few sandbags to the non-cantilevered side is a quick way to add some peace of mind in case you have a heavier log, or one is rolling a bit more than expected.
GOOOOOOD MAAAAWWNIN EVERYONE!!! Please.. Pray for everyone that will be affected by this hurricane… Adam, nice job!! That’ll be (as Mike Morgan says) as handy as a pocket on a shirt. Catch ya on the next one Have a day 😊
Great simple bucking table. Sawing with Sandy (youtube channel) built one just like that and he has it placed right beside the log lift of his Eastonmade Axis. It works great for him.
If I had attempted to build something like that, I would have finished it only to find that it was too big to get out through the shop door. Great work!
Awesome plan coming together, from concept to planning the layout, let alone the ergonomics. Effective, efficient, and effective all at once. Great work Adam and Doug. Pen to paper and paper to the finish line. Planning is key as seen. Great video Adam. 👍🏻
Excellent! Simple but very effective. I wish I had the room at my shop for something like this but for now I at least cut my bending over in half, now I cut and load the rounds into my dump trailer then just take the rounds off the trailer right at the splitter.
I like this build alot. My brother needs this or similar. I would add wood plugs to the holes on top, so water doesn't collect. I built my last picnic table with no screws from the top.
I appreciate you making this. I’m gonna consider this,…as I am 6’6” tall. I have to figure out how long I want the table to be. I order truckloads of logs,…and the logs average 24’ long.
When you came speeding around that building in fast motion on your tractor, I thought - he's so good at editing!! Great video, as always!! That table idea is so smart!! God bless y'all!! ♥️🙏♥️👍 P.S. great background music!!
Great job Adam. After watching Doug's video a while back I knew that it wouldn't be long before you would have one for yourself. It should help to save your back as you age. Anyway stay safe healthy and dry. Bill H from Cranberry Township
Adam get yourself a plastic pallet. Then attach pump to it. That way you won’t have to worry about a wood pallet rotting and getting rusty nails in the pond.
An idea to help with measurements. Run a long piece of rebar across the width of the structure, about 3 or 4 fet back. Then weld on smaller pieces of rebar, purhaps 8-12 inches long, at 16 inch intervals. Make a lever at the end of structure so you can hide the extended rebar when not needed and raise it up when needed. If you're cutting up the milled pieces, which are a bit less even for laying out the paint stripes, you pull up the rebar measurements. And then you have an even measurement for the odd size side pieces.
I built a wood live deck and I put strips of UHMW plastic on top of each rails. It realy help pulling the logs with the pickaroon has they slide easily if they're not perfectly round and won't roll down.
Pretty sweet set up! And since Kyle from Spicers got jokes, you can have him pick the rounds up off the ground since he doesn’t have far to go and you get the ones off the table!
My immediate thought on the logs rolling down towards you as you are cutting them was ... Feet and legs! But, I'll watch and wait :) Nice solution. Bespoke solution nicely done. Keep up the great work :)
Nice work! Every time I see one of these table builds I see a few things I like better than the way I built mine. I may have to revisit mine at some point...
Adam even though wrong on what you were building still hope you decide to build something down by your second pond......would make great content wink, wink. Like your table made practical and simple and what you wanted. Thanks for sharing build with us.
Good morning Adam, you should wear steel toe boots or a thick toe boot instead of Heydude shoes! I slipped once using a chain saw wearing sneakers and sliced the top barely missing all my toes by 1mm.
Careful, turning with a load is one of the things they drilled into our heads in the plant I worked in, as a no-no. Backs and knees don't like pivoting under load.
Nice Build Adam. You could have put a full length stop block on the end then cut through it I'll have to figure something for mine as when I built it in 2007 , It sits on the Ground and after lining up one end of all the logs I'd cut through the whole stack in one fell swoop and end up with 40+ pieces of wood cut to 24".
Now a good coat of oil and diesel mix will keep that table from rotting with time, May have to respray a couple time till the wood soak it in. Have a good day.
Great job on the Bucking table!! Maybe you need to use some used motor oil to waterproof it. Look up everything Elliott on how he used it to stain his deck.
Watching you cut down but finishing by cutting up to prevent pinching makes me speculate. Would a design where the center 4x4s being higher than the ends be better? It would look like a bow with the center highest. This would have a log teeter a bit when cutting so you will not pinch as it would always have a slight overhang on the ends. This would allow you to only cut down. It’s always preferable to let the weight of the saw do the work and not fight it cutting up.
Awesome build, Adam. Looks like that table will serve you well. Will you treat the table, especially the legs that have contact with the ground, with any kind of finish to make it resistant to the elements? Christmas is almost here. When you write your letter to Santa Claus, tell him you want a 12-inch miter saw. It will saw all the way through those 4x4's without the need to finish the cut with the hand saw.
Great job look to meet your needs. I suspect the wood you used wont survive outside well so putting a functional preservative on it will give the table a much longer life.
Great video on the bucking table! Would you mind sharing the numbers on all the pieces you cut for the legs, supports, and rails? This would work great for me as well being a one man operation.
Use code HOMETOWN50 to get 50% OFF your first Factor box plus 20% off your next month of
orders at bit.ly/4eu2OiM!
You missed the perfect opportunity to say you are 6”5’ when you were explaining the size of the table. 😂😂
You should have made the rails 6’5” long. Otherwise, looks great. Nice work guys!
Kyle, you're definitely a great and subtle ball buster 😂.
Good call!
You and Doug are probably mutually the greatest neighhbour combination on YTube.
Adding a few sandbags to the non-cantilevered side is a quick way to add some peace of mind in case you have a heavier log, or one is rolling a bit more than expected.
That’s an awesome job, Adam. 👍
Your channel has really taken off congratulations excellent well deserved you work hard 👏
Thank you so much 😀
I get a chuckle every time that little miter saw makes an appearance 😂 might be time to upgrade!
True. I did buy it about 10 years ago. Was one of my first power tools
@@HometownAcres That would be #2 on the new tool list, #1 would be a new grinder. 👍🏻
It’s time 6-5 it’s time!
I still have my 90's delta chop saw, scabed back together trigger and all. If it works, it works.
Good to see Doug 👍 it’s been a while 🇺🇸🇺🇸
Adam, you are quite blessed with a super neighbor! Lucky man:)
Yes I am!
Maybe he should rent out that handy neighbor of his! I got first dibs on having Doug down here in Tennessee! Tim
There’s neighbour Doug!! I was missing him!😊
We all need a neighbor Doug. 😊 The saw table looks great.
I wish I had a neighbor like Doug. Seriously.
Dear Doug, Thanks for EVERYTHING. Yours Truly, Adam
GOOOOOOD
MAAAAWWNIN EVERYONE!!!
Please..
Pray for everyone that will be affected by this hurricane…
Adam, nice job!! That’ll be (as Mike Morgan says) as handy as a pocket on a shirt.
Catch ya on the next one
Have a day 😊
Everyone needs a neighbor Doug.
I agree
Great simple bucking table. Sawing with Sandy (youtube channel) built one just like that and he has it placed right beside the log lift of his Eastonmade Axis. It works great for him.
If I had attempted to build something like that, I would have finished it only to find that it was too big to get out through the shop door. Great work!
Neighbor Doug taught you well, Pilgrim.
Yes he did
I recommend plugging the holes in the top of the rails to prevent water from getting into them and causing rot.
Perfect ! Now get your pump up sprayer and hose down all facings with diesel.
Nice bucking table- Great Job 👍
I can hear your back saying "THANK YOU"! all the way from where I sit.
Awesome plan coming together, from concept to planning the layout, let alone the ergonomics. Effective, efficient, and effective all at once. Great work Adam and Doug. Pen to paper and paper to the finish line. Planning is key as seen. Great video Adam. 👍🏻
Thanks!
Excellent! Simple but very effective. I wish I had the room at my shop for something like this but for now I at least cut my bending over in half, now I cut and load the rounds into my dump trailer then just take the rounds off the trailer right at the splitter.
Very nice bucking table Adam, great plan especially with the mill slabs!!
Good idea Adam. Glad to hear that the slab cutoffs will be used instead of just being pitched. Stay safe.
Great concept and end product. I hope it serves your needs as expected.
Nice rig for cutting! GOOD JOB BOYZ!!! ++++++++++
We watched this on our vacation…. That is dedication!!!! ❤
Just love it when you have all the tools for the job in hand. Many thanks!
You bet!
A davit arm crane with pincers to shift the cut logs would be a great addition. Mount it to the barn post and swing out and in.
I like this build alot. My brother needs this or similar. I would add wood plugs to the holes on top, so water doesn't collect.
I built my last picnic table with no screws from the top.
I appreciate you making this. I’m gonna consider this,…as I am 6’6” tall. I have to figure out how long I want the table to be. I order truckloads of logs,…and the logs average 24’ long.
When you came speeding around that building in fast motion on your tractor, I thought - he's so good at editing!! Great video, as always!! That table idea is so smart!! God bless y'all!! ♥️🙏♥️👍
P.S. great background music!!
Thank you Dianne. Most people don’t notice the editing!
@HometownAcres Shame on them! I know that's very time-consuming!! You're the best at it, & I appreciate it!! 👍🌟♥️
That's the secret sauce in the best channels.
@@stromxtc2033 Editing or great background music - I think both are the secret. 😉👍
Awesome! Great job!!!
Nice design , simple and functional
Great build. Perfect multiple uses you have planned for it.
Great job Adam. After watching Doug's video a while back I knew that it wouldn't be long before you would have one for yourself. It should help to save your back as you age. Anyway stay safe healthy and dry. Bill H from Cranberry Township
Yeah I have been meaning to build one for a while and finally was able to carve out some time to do it
Great table Adam, Shou sugi ban the first 8" of the bottom of the legs contact with the ground.
Good call
Adam get yourself a plastic pallet. Then attach pump to it. That way you won’t have to worry about a wood pallet rotting and getting rusty nails in the pond.
What great idea looks good and easy on the back🇳🇿👍
Thanks for sharing this is a nice table
Great design and great build Adam. That will certainly be a time and back save! - Dick
Nice design! You can throw a couple of sand bags over the cross braces in the rear to keep it from flipping from being unbalanced.
An idea to help with measurements. Run a long piece of rebar across the width of the structure, about 3 or 4 fet back. Then weld on smaller pieces of rebar, purhaps 8-12 inches long, at 16 inch intervals. Make a lever at the end of structure so you can hide the extended rebar when not needed and raise it up when needed. If you're cutting up the milled pieces, which are a bit less even for laying out the paint stripes, you pull up the rebar measurements. And then you have an even measurement for the odd size side pieces.
Very nice, I like it. Wondering if the next log will get in the way and maybe cause a kickback hazard though?
I built a wood live deck and I put strips of UHMW plastic on top of each rails.
It realy help pulling the logs with the pickaroon has they slide easily if they're not perfectly round and won't roll down.
Pretty sweet set up! And since Kyle from Spicers got jokes, you can have him pick the rounds up off the ground since he doesn’t have far to go and you get the ones off the table!
Hahahaha I’m sending this to him
@@HometownAcres 🤣
Another great video!👍🏻
Glad you enjoyed it!
Great build!!
Nice job!!!
Gotta keep them off the ground.that looks perfect.
I thought initially that was going to be way too short for you but looks perfect. Nice work guys! 👍🏼
Looks great!
Thanks!
My immediate thought on the logs rolling down towards you as you are cutting them was ... Feet and legs! But, I'll watch and wait :) Nice solution. Bespoke solution nicely done. Keep up the great work :)
Very nice table for your back ,great channel !! 23:40
Thank you very much!
Nice work! Every time I see one of these table builds I see a few things I like better than the way I built mine. I may have to revisit mine at some point...
Go for it!
You need that on a raised platform so you have a ledge for the logs to drop off , But it is backwards you do not want the cut logs underfoot
Hey Adam, paste wax works much better than WD40 for sinking those lag bolts. Will prevent rust even better. Nice build.
looks good to me , well done , best to all john
Thanks 👍
Nice!
Great job! Could maybe added some D4 (water resistant) wood glue to add some extra strength for the 45 degree block stops
You may want to put some thin bricks under the legs to protect them from ground contact rot.
Agreed, I don’t think beech is rot resistant when it comes to ground contact.
Nice table!
Thanks!
Innovative! 🤗🤗🤗
Great idea
Adam even though wrong on what you were building still hope you decide to build something down by your second pond......would make great content wink, wink. Like your table made practical and simple and what you wanted. Thanks for sharing build with us.
Good morning Adam, you should wear steel toe boots or a thick toe boot instead of Heydude shoes! I slipped once using a chain saw wearing sneakers and sliced the top barely missing all my toes by 1mm.
Yikes that sounds scary
I agree, at least good leather boots. 😊 leave the hey dudes for going to the grocery store
Careful, turning with a load is one of the things they drilled into our heads in the plant I worked in, as a no-no. Backs and knees don't like pivoting under load.
Nice Build Adam.
You could have put a full length stop block on the end then cut through it
I'll have to figure something for mine as when I built it in 2007 , It sits on the Ground and after lining up one end of all the logs I'd cut through the whole stack in one fell swoop and end up with 40+ pieces of wood cut to 24".
nice build. something similar is on my to-do list, and has been for a while - just haven't gotten around to it.
Could you add some sort of mechanical lever or foot pedal in a few locations to push up an area and keep the log from pinching.
Great idea & plan, watched o\a few videos on these like the slope idea !
Now a good coat of oil and diesel mix will keep that table from rotting with time, May have to respray a couple time till the wood soak it in. Have a good day.
Yep I plan on staining it sometime before winter
Great job on the Bucking table!! Maybe you need to use some used motor oil to waterproof it. Look up everything Elliott on how he used it to stain his deck.
Yep I plan to stain it later this fall
Nice Design (and build) Adam! Looks great! Best, -- J. Andre. / Old Iron Acres
Hey, thanks!
Enjoy the table
Thanks!
Watching you cut down but finishing by cutting up to prevent pinching makes me speculate. Would a design where the center 4x4s being higher than the ends be better? It would look like a bow with the center highest. This would have a log teeter a bit when cutting so you will not pinch as it would always have a slight overhang on the ends. This would allow you to only cut down. It’s always preferable to let the weight of the saw do the work and not fight it cutting up.
Very nice. Side question; where can I purchase the steel wood bins as seen behind you at the 12 second mark. Thank you for your time.
Nice work! We have the exact same tan Pfatlzgraff dinner plates 😆.
No way! That’s cool.
@@HometownAcres That’s funny that you and your viewer have the same plates!
Awesome build, Adam. Looks like that table will serve you well. Will you treat the table, especially the legs that have contact with the ground, with any kind of finish to make it resistant to the elements? Christmas is almost here. When you write your letter to Santa Claus, tell him you want a 12-inch miter saw. It will saw all the way through those 4x4's without the need to finish the cut with the hand saw.
Yes. Sometime this fall after it has some time to dry a bit
you did awesome. Should make a pdf of your plan and sell it.
Great job! I also wondered why you drove two hours to deliver firewood????
Great job look to meet your needs. I suspect the wood you used wont survive outside well so putting a functional preservative on it will give the table a much longer life.
I plan to stain later this fall before winter
Only thing missing is Doug's patented slot to hold your chain saw on the side
Yep
Greetings from Alaska. First time viewer/new subscriber. You got an awesome place. What state are you in?
Might want to put some cement blocks with some kind of sill seal to prevent wicking of moisture from the ground.
Not necessary
I'm thinking you might want to plug up all those bolt holes on the top of your table to keep them from filling up with rainwater.
Sounds like you're going to stain it but I'd also consider some sort of dowel in the screw holes so water doesn't pool in your recesses.
I was thinking the same thing
You should probably use wood sealer on it since it's out in the weather.
I will seal it in a week or 2. Let it bleed off some of that exterior moisture from the green lumber
I love how you MASSIVELY over engineered this table…a man after my own heart! I’ll so over engineer something that it actually makes it weaker!!!🤣🤣🤣
Attaboy Adam. 👍👍👍
Thanks!
Do you have to cut from underneath the to log to finish the cut??
Will another log roll down and interfere with the first one??
Great video on the bucking table! Would you mind sharing the numbers on all the pieces you cut for the legs, supports, and rails? This would work great for me as well being a one man operation.
Front legs 20”
Back legs 25”
Front and back Beams 10’
Space between front and back beams 4’ 3”
Bed rails 6’3”
Hey! Question. How big is that area your working in. I wanna make something like that for firewood haha
Goo Bucks! OH.
Where is the second part of that solar installation for the pond?
It’s coming. Had to wait for some wire to come in the mail. Should be finishing it up tomorrow
So what you are saying is Neighbor Doug is worth copying and I would totally agree.
Don't pick up the end cut rounds. Use a foot to roll them to the log lift.