this is youtube content at its purest ! no clickbait no wasting of time just straight to the point and 100% honest. i myself will probably never get this advance in DIY but i enjoy this content.
Hello my friend, Air compressor looks good. Thank you for the introduction and information. Best wishes. I "KL" brand 50 Lt. I am using an 8 bar compressor. Not just for nailer. Many tools and air blowing systems work very well for me. Intermediate apparatus for waste water is also a good idea. We call it a conditioner. This is a good choice. Thank you for sharing. See you. Big greetings.
You too are an inspiration for this upgrade my friend. I was inspired by your videos too. I believed that is so much we could do it such an investment. But I do not have a workshop. So I have a find a nice spot for this compressor somewhere in the house. Thanks for the info and many thanks for supporting me. You have always been there.
3 ปีที่แล้ว
@@VIDEOEPPO you're welcome mate. I also do it in a room in the basement of the house. So as a hobby, a room in the basement is my workshop. see you anytime. Big greetings.
My 9litres NIKtech compressor doesn't shut off. Arrived at your video while looking for solutions. Got any suggestions to set up the upper limit of a air compressor
I am new to this whole thing myself. I just fill up the tank and set up the pressure for my nail gun or spray gun. It kicks in when pressure is low and automatically cuts off when adequate. I thought all compressors have this feature. I might have to google this question of yours!
Recently I have only been using pallet wood and there is a reclaimed wood shop from where I buy them. Some mills deal with quality wood like teak but it's too expensive. And then there are mills that deal with generic wood from all sorts of trees like mango, neem, tamarind, etc. But these are used for construction purposes like centering and terrace work. But that too is costly compared to pallet wood. Pallet wood comes in all thicknesses and a wide variety of wood. If you are making something that needs strength, then pick the denser planks. I do not know what wood it is...but i make my guess and pick according to my need.
It depends on how much and how well we use it. If you are going to use it once in a while or for hobby and home improvement..china products are cheap and should do the task. But if you are going to use it professionally...always buy branded ones which have service center nearby.
Hi I'm looking for a compressor for home usage and is this brand ok ? What about the quality and durability ? Is it worth having it or go for another product ?
Go for the model with silent compressor. This one is a bit loud. I didn't know that until I made a purchase. Also, this was a cheap option available for me and I saw the same brand in local shops . They said they repair and check faults on these machines and hence I bought it.
@@VIDEOEPPO thanks for your reply bro. But oil free compressor filling up time is more than this time right ? And this oil compressor can be serviced but oil free compressor can't be serviced right ?
I am diy lover too! My questions about this air compressor are : Is the motor powerful enough to avoid pressure drop while using spray gun continuous? Is it too noisy ?
yeah its noisy (could give you a heart attack if it starts abruptly). and I have not yet tried spray painting with it. I am not complaining considering the price tag and my work environment. Definitely not good for residential areas!
A million thanks and great video was worth all my time but came up with some doubts can you tell me which pu hose pipe you chose , what brand oil and water separator you use ? how much does it cost/ what size quick release coupler you purchase for how much and lastly what is the size of the hose clamp and how much did you buy it for ? Man your video is good its just than i am looking for some answers if i get it from you id be eternally grateful
Hi, Thank you for your time .To answer you questions ,I do not know the brand of the PU pipe but its 12 mm and very generic. one meter is 60 rupees. I haven't added new oil , just used the one that came in the package. But the seller told me to use 20W40 engine oil. Hose clamps the smallest ones I could find but these are not good. There are better hose clamps made in steel and have a wing nut on it. Those are just 20 rupees each. I am not sure about the size of the quick release coupler. I took my nail gun to the shop and picked up the adapter based on it. the oil water separator link is in the description. cost it 700 rupees. Hope you got your answers!. Good luck
I am highly disappointed while watching this video .You buy a compressor and putting vlog , this is not you friend . Make it friend i am just kidding .This type is complicated why means we can't service separately motor or the compressor it is jointed .I also asked the price of air compressor it comes around 11000 , 40 litres tank capacity motor and compressor separately . Ok friend you are ready to make carpentering work also .When you are opening shop send me a invitation 😃😃😃😃😃😃😃😃😃
I appreciate your feedback. Its not just about the air compressor. It more about the set up of an air- compressor to work with pneumatic tools., The kind of hose which is required, the type of connectors and some really inexpensive pneumatic tools that can come in handy. The one with motor and compressor has its own pros and cons. This one is low maintenance hardy stuff...plus I like its finish! without tax it was 8000/- and with tax 1440/- extra so total 9440/-. I would say its a decent buy. Moreover I post video of various kinds of things that help. A little tool review can still find a place on my channel. 🙂🙂🙂
this is youtube content at its purest ! no clickbait no wasting of time just straight to the point and 100% honest.
i myself will probably never get this advance in DIY but i enjoy this content.
So many many thanks!...
superb explanation. absolute transparency and totally bullshit free. loved it.
Thanks a lot for your honest comment!
Hello my friend,
Air compressor looks good. Thank you for the introduction and information. Best wishes. I "KL" brand 50 Lt. I am using an 8 bar compressor. Not just for nailer. Many tools and air blowing systems work very well for me. Intermediate apparatus for waste water is also a good idea. We call it a conditioner. This is a good choice. Thank you for sharing. See you. Big greetings.
You too are an inspiration for this upgrade my friend. I was inspired by your videos too. I believed that is so much we could do it such an investment. But I do not have a workshop. So I have a find a nice spot for this compressor somewhere in the house. Thanks for the info and many thanks for supporting me. You have always been there.
@@VIDEOEPPO you're welcome mate. I also do it in a room in the basement of the house. So as a hobby, a room in the basement is my workshop. see you anytime. Big greetings.
looking forward to seeing projects using the compressor.
Thank you...i ma looking forward to make something better as well...hahha
My 9litres NIKtech compressor doesn't shut off. Arrived at your video while looking for solutions. Got any suggestions to set up the upper limit of a air compressor
I am new to this whole thing myself. I just fill up the tank and set up the pressure for my nail gun or spray gun. It kicks in when pressure is low and automatically cuts off when adequate. I thought all compressors have this feature. I might have to google this question of yours!
how are you sourcing wood - from where and at what price?
Recently I have only been using pallet wood and there is a reclaimed wood shop from where I buy them. Some mills deal with quality wood like teak but it's too expensive. And then there are mills that deal with generic wood from all sorts of trees like mango, neem, tamarind, etc. But these are used for construction purposes like centering and terrace work. But that too is costly compared to pallet wood. Pallet wood comes in all thicknesses and a wide variety of wood. If you are making something that needs strength, then pick the denser planks. I do not know what wood it is...but i make my guess and pick according to my need.
Nice well explained thanks pal you help me a lot
Glad it helped
Can we learn automatic spray painting with this compressor
yes you can. But what kind of spray painting....this will be too big for spainting on canvas. But otherwise it should work
Bike parts
Hi sir do reply today only, i, purchased an air compressor its china manufacturing so what you think is it lpng lasting machine!
It depends on how much and how well we use it. If you are going to use it once in a while or for hobby and home improvement..china products are cheap and should do the task. But if you are going to use it professionally...always buy branded ones which have service center nearby.
Where can i get that extension pipe
usually from tools shops
Motor winding aluminium or copper..?
Oh I didn't check that. At this price I doubt if it will be copper
Can u make a video on the paint gun as well
sure! why not. But I haven't tried it out yet.
Where did you buy compressor from?
from a seller through indiamart
@@VIDEOEPPO can you share details interested to buy one
Hi
I'm looking for a compressor for home usage and is this brand ok ?
What about the quality and durability ?
Is it worth having it or go for another product ?
Go for the model with silent compressor. This one is a bit loud. I didn't know that until I made a purchase. Also, this was a cheap option available for me and I saw the same brand in local shops . They said they repair and check faults on these machines and hence I bought it.
@@VIDEOEPPO thanks for your reply bro.
But oil free compressor filling up time is more than this time right ?
And this oil compressor can be serviced but oil free compressor can't be serviced right ?
@@mahesh_d every compressor can be serviced bro...including Apple laptops. We are India... remember!
I am diy lover too! My questions about this air compressor are : Is the motor powerful enough to avoid pressure drop while using spray gun continuous? Is it too noisy ?
yeah its noisy (could give you a heart attack if it starts abruptly). and I have not yet tried spray painting with it. I am not complaining considering the price tag and my work environment. Definitely not good for residential areas!
Brother ..Where can I buy one ....?
Online la irukku bro... but dont buy his model.... Silent version vangunga...its better
A million thanks and great video was worth all my time but came up with some doubts can you tell me which pu hose pipe you chose , what brand oil and water separator you use ? how much does it cost/ what size quick release coupler you purchase for how much and lastly what is the size of the hose clamp and how much did you buy it for ? Man your video is good its just than i am looking for some answers if i get it from you id be eternally grateful
Hi, Thank you for your time .To answer you questions ,I do not know the brand of the PU pipe but its 12 mm and very generic. one meter is 60 rupees. I haven't added new oil , just used the one that came in the package. But the seller told me to use 20W40 engine oil. Hose clamps the smallest ones I could find but these are not good. There are better hose clamps made in steel and have a wing nut on it. Those are just 20 rupees each. I am not sure about the size of the quick release coupler. I took my nail gun to the shop and picked up the adapter based on it. the oil water separator link is in the description. cost it 700 rupees. Hope you got your answers!. Good luck
@@VIDEOEPPO Sir i dont even know your Name but i thank you in utmost sincerity for your apt reponse i wish you luck for all your future Endeavours
My Name is Joshua. And thank you for you wishes . All the best to you too!
@@VIDEOEPPO you are welcome
Price bro
I got it for 9940/- including gst
Thanks bro
Welcome
Your location
Chennai
अंग्रेज का चो….. हिन्दी में बोल लेते
btali is a waste machine
this is duplicate product
Oh my God!... honestly bro....for me this is not a regular use machine. I do diy and use machine only for the projects i make. So it works for me.
I am highly disappointed while watching this video .You buy a compressor and putting vlog , this is not you friend . Make it friend i am just kidding .This type is complicated why means we can't service separately motor or the compressor it is jointed .I also asked the price of air compressor it comes around 11000 , 40 litres tank capacity motor and compressor separately . Ok friend you are ready to make carpentering work also .When you are opening shop send me a invitation 😃😃😃😃😃😃😃😃😃
I appreciate your feedback. Its not just about the air compressor. It more about the set up of an air- compressor to work with pneumatic tools., The kind of hose which is required, the type of connectors and some really inexpensive pneumatic tools that can come in handy.
The one with motor and compressor has its own pros and cons. This one is low maintenance hardy stuff...plus I like its finish! without tax it was 8000/- and with tax 1440/- extra so total 9440/-. I would say its a decent buy. Moreover I post video of various kinds of things that help. A little tool review can still find a place on my channel. 🙂🙂🙂
aluminum winding...thats y it is cheaper than ingco...
yup!
अंग्रेज का चों… हिन्दी में बोल लेते
why?