Having put Fusso on a couple of cars (particularly dark cars) I find that it is best to buff off almost before it has flashed off - the longer you leave it the harder it becomes, and 5-8 mins is waaay too long in my experience (working outside, but in the cool UK).
I tried to use it in cold too. But the application didn't work, I was working whit 5 degrees... So I washed Decontaminated Paint cleaner: dodo juice lime prime Alcohol wipe real good Then applied fusso ... I tried to leave it for 5 minute and in some part I left it there for much more In the end I wiped everything whit speed and barrier. But it didn't work apparently... There is no beading Very slow sheeting... I don't were I went wrong Is not the first time that I apply it and yet I can't get to work it at 100% Such a delusion
I've applied this to two cars recently in the UK, both times the air temp was around 22°C. On both occasions it hazed over immediately on contact making removal very hard. Beading is insane but the problematic application and removal means I might get rid
I used it recently for the first time ever and I found it really hard to remove as I probably put on too thick. I did see a guy who applied a wax via electric polisher And it looked as tho it spread better, this is not amateur friendly so my next application will be the fusso coat 7 month and I’ll try apply it using a polisher
@@xxnickthegreekxxtento vosk je ťažší na aplikáciu a ťažšie sa zotiera keď ho necháte orischnut. Treba robiť po častiach nie celé auto a dávať pozor na teplotu karosérie a hlavne krúživými pohybmi nie ako na videu. Vyhnete sa hromadenie vosku na jednom mieste a problémom pri zotierani. Inak vosk je super a aj dosť vydrží len ho po 6 mesiacoch treba boostrovat
The Micro Liquid is for light clear coat correction. The Silicon Off is used to fully remove the clay lube and the Micro Luquid residu. If you don't remove the polishing oils or old waxes redisu, the Fusso Coat won't fully bond with the paint to maximize performance of the Fusso Coat.
How do you clean the foam applicator after a session? I just washed mine under warm water with a little dish soap, but this wax appears to be staying in the foam. Thanks for any help.
What can i do to remove the fusso coat to do it over again? Because the first time i applied i didnt do compound and clay and all the prep work... and i also applied a bit thick layer... so it not gloss at all and have some hazy surface look...
This is popular for a reason, it's great long-lasting protection, with fantastic hydrophobicity. Most people apply too much, making it hard to buff. It's a very good wax, but in my experience no better than Bilt Hamber double speed wax, which is 50% cheaper.
I bought Fusso Coat and i tried it but mine is really powdery when applied. It is also very hard to apply since it is not that smooth and it doesnt spread properly. Buffing it also very hard. It feels hard and powdery. What should i do?
Czy temperatura ma znaczący wpływ na łatwość aplikacji ? Pracowałem już z wieloma pastami i woskami i z żadnym z nich nie miałem takich problemów jak z waszym produktem . Auto było umyte , wyglinkowane i odtłuszczone "izopropylem" a mimo to fusso miał spore problemy by zostać na lakierze, pad przesuwał się bardzo opornie, a przy kilkukrotnym przejechaniem nim po tym samym miejscu skutkowało "rolowaniem" pasty na lakierze . Doradzcie coś bo szału dostane
Właśnie w tych wszystkich poradnikach nic nie mówi się o temperaturze tylko o samej technice nakładania. Szkoda że autor filmu nie poczuł się do tego by odpowiedzieć Ci na komentarz
Dwa pytania: 1. Jaka jest optymalna temperatura nakładania? 2. Czy po użyciu Micro Liquid Compound Dark trzeba odtłuścić czy wystarczy dotrzeć fibrą i od razu nakładać Fusso Coat? Z góry dzięki!
Really want to buy some of this stuff but am a little confused as to the best version for my paint. I have an Estoril Blue BMW M235i. Should I get the dark or light wax please?
I chose dark, "apparently" light has a bit more cleaning properties, while dark has a bit more fillers and wax, anyway, both have the same extreme hydrophobic properties. My car is silver, I still chose dark.
Do not never use water. You will use twice as much and make it 10 times harder to apply. Using a dry applicator makes really easy and you see how much your using. I used more on 2 panels with it wet then I did on the rest of my car.
You wet the applicator to make it softer and more maneuverable across body work. Its not wet when you apply the wax. If your applicator is stiff you have an increased chance of damaging your paint work and uneven pressure when applying. You don't need to do it.
I found this product terrible to use. It has left dark marks on my once immaculate paintwork, it’s not easy to apply at all. I now have to panel wipe my whole car and start again, I’m really looking forward to throwing it in the bin tomorrow! Avoid!
![เปิดบ้าน โคตรสวย ป๋องกพล รู้จักตั้งนาน เพิ่งรู้ว่ารวย!!! l [Nickynachat]](http://i.ytimg.com/vi/tmgCF_2HfYI/mqdefault.jpg)
Having put Fusso on a couple of cars (particularly dark cars) I find that it is best to buff off almost before it has flashed off - the longer you leave it the harder it becomes, and 5-8 mins is waaay too long in my experience (working outside, but in the cool UK).
I tried to use it in cold too.
But the application didn't work, I was working whit 5 degrees...
So I washed
Decontaminated
Paint cleaner: dodo juice lime prime
Alcohol wipe real good
Then applied fusso ...
I tried to leave it for 5 minute and in some part I left it there for much more
In the end I wiped everything whit speed and barrier.
But it didn't work apparently...
There is no beading
Very slow sheeting...
I don't were I went wrong
Is not the first time that I apply it and yet I can't get to work it at 100%
Such a delusion
I've applied this to two cars recently in the UK, both times the air temp was around 22°C. On both occasions it hazed over immediately on contact making removal very hard. Beading is insane but the problematic application and removal means I might get rid
@@PhasesOfIronCarbon be like mister miyagi: Wax on, Wax off (immediately!)
I used it recently for the first time ever and I found it really hard to remove as I probably put on too thick. I did see a guy who applied a wax via electric polisher And it looked as tho it spread better, this is not amateur friendly so my next application will be the fusso coat 7 month and I’ll try apply it using a polisher
@@xxnickthegreekxxtento vosk je ťažší na aplikáciu a ťažšie sa zotiera keď ho necháte orischnut. Treba robiť po častiach nie celé auto a dávať pozor na teplotu karosérie a hlavne krúživými pohybmi nie ako na videu. Vyhnete sa hromadenie vosku na jednom mieste a problémom pri zotierani. Inak vosk je super a aj dosť vydrží len ho po 6 mesiacoch treba boostrovat
U can't go wrong with Soft99!.
Value for $$$& really works with ease .
Just got the dark and light cant wait to try them out it looks awesome stuff
Great informative video. Just purchased my first Fusso coat light for my car. Can't wait to try it after watching this video.
Question
What did you use silicon off and micro liquid for.
The Micro Liquid is for light clear coat correction.
The Silicon Off is used to fully remove the clay lube and the Micro Luquid residu.
If you don't remove the polishing oils or old waxes redisu, the Fusso Coat won't fully bond with the paint to maximize performance of the Fusso Coat.
Can it be used on headlights?
yes
How do you clean the foam applicator after a session? I just washed mine under warm water with a little dish soap, but this wax appears to be staying in the foam. Thanks for any help.
Use an APC or rag cleaning compound
What can i do to remove the fusso coat to do it over again? Because the first time i applied i didnt do compound and clay and all the prep work... and i also applied a bit thick layer... so it not gloss at all and have some hazy surface look...
This is popular for a reason, it's great long-lasting protection, with fantastic hydrophobicity.
Most people apply too much, making it hard to buff.
It's a very good wax, but in my experience no better than Bilt Hamber double speed wax, which is 50% cheaper.
This or a ceramic coat?
Can use soft99 luxury gloss liquid type to maintanance fusso 12 month wax?
I guess you could, but Soft99 Speed & Barrier spray is surely compatible to top Fusso. It even has the same PTFE elements.
Hard to apply
Hi,can I apply coat on a glas roof?
can i use the dark formula on a white car , i am asking because someone told me that the dark formula has more fillers in it ..
Yes you can
How about matt paint?
I bought Fusso Coat and i tried it but mine is really powdery when applied. It is also very hard to apply since it is not that smooth and it doesnt spread properly. Buffing it also very hard. It feels hard and powdery. What should i do?
u add water on it before use.
Can I apply this after polishing my car with dewalt car polishing machine ?
Maybe, but better off to be safe with Milwaukee
Can I apply the Fusso coat paste wax on the headlight ??
Thank you.
No, it's for paint
Czy temperatura ma znaczący wpływ na łatwość aplikacji ? Pracowałem już z wieloma pastami i woskami i z żadnym z nich nie miałem takich problemów jak z waszym produktem . Auto było umyte , wyglinkowane i odtłuszczone "izopropylem" a mimo to fusso miał spore problemy by zostać na lakierze, pad przesuwał się bardzo opornie, a przy kilkukrotnym przejechaniem nim po tym samym miejscu skutkowało "rolowaniem" pasty na lakierze . Doradzcie coś bo szału dostane
Właśnie w tych wszystkich poradnikach nic nie mówi się o temperaturze tylko o samej technice nakładania. Szkoda że autor filmu nie poczuł się do tego by odpowiedzieć Ci na komentarz
To najebaliście za duzo panowie. 16 stopni jest ok
@@ryanverbinski2040 próbowałem z różnymi ilościami i w różnych temperaturach i była lipa .
Some Scratche resistance ?
Dwa pytania:
1. Jaka jest optymalna temperatura nakładania?
2. Czy po użyciu Micro Liquid Compound Dark trzeba odtłuścić czy wystarczy dotrzeć fibrą i od razu nakładać Fusso Coat?
Z góry dzięki!
Always do an IPA wipe down after your polishing is finished, to ensure your clear coat is as bare as possible.
Dziękuję 👍🏽
What are the consequences of applying it with orbital polisher?
Overkill
Someone comes round your house at night and bums you
اريد من هاذ منتج شلون نحجز
What about scratches? Can it protect car from scratches?
no. its a wax- so it might fill in the scratches already on the paint, but it wont fully protect from scratches.
Really want to buy some of this stuff but am a little confused as to the best version for my paint. I have an Estoril Blue BMW M235i. Should I get the dark or light wax please?
Dark, apparently the difference is very very minimal so get whatever is cheaper.
Dark!
I chose dark, "apparently" light has a bit more cleaning properties, while dark has a bit more fillers and wax, anyway, both have the same extreme hydrophobic properties. My car is silver, I still chose dark.
Can you apply with a da polisher
Si si, or you can use a da hand
Hello! I do not have exact information: can it be used on lamps? Thank you!
Why not?
@@barnaati4944 because it is plastic?!
@@arturtakacs Use it, nothing gonna happen. I did it mine, couple months ago, and still working.
Yes, I used it on my lamps and my living room has never looked so good
Do you recommend for ceramoc coating car? And would it effective or last long?
How would you apply something on a coated surface?
@@JacobEjgaard i have bought it and done applying, little bit enchancement on water beading....generally no differnet 🤣🤣🤣🤣🤣🤣
Do not never use water. You will use twice as much and make it 10 times harder to apply. Using a dry applicator makes really easy and you see how much your using. I used more on 2 panels with it wet then I did on the rest of my car.
You wet the applicator to make it softer and more maneuverable across body work. Its not wet when you apply the wax. If your applicator is stiff you have an increased chance of damaging your paint work and uneven pressure when applying. You don't need to do it.
Lol how about removing previous wax from shampoos ?
I found this product terrible to use. It has left dark marks on my once immaculate paintwork, it’s not easy to apply at all. I now have to panel wipe my whole car and start again, I’m really looking forward to throwing it in the bin tomorrow! Avoid!
Sounds like a “you” problem lol
@@curtisbender1945 obviously not if ‘you’ read the reviews
I will never ever buy it again ... everywere have wax residue, on my car
Used to much
U can't go wrong with Soft99!.
Value for $$$& really works with ease .