Don't use this model on a 24v solar system that supplies the voltage same as in the batteries during charging, blew the living bejeezous out the the 24v 4700uf cap, had to replace it with a 120v one, the rest of the circuit is ok up to 30v, it clipped even when supplying it 12v until I replaced the cap, higher voltage = higher output on this unit ... live off-grid and getting enough volume out of either 5v or 12v speakers aint always easy, caping this at a higher voltage makes it so even the lowest output device I connect to it has enough volume, one problem I have using it with a Windows 10 laptop via BT is if 2 sound sources occur at once (ie VLC and a streaming source both at once) ... no sound is heard if one of those sources stops till I switch to another speaker then back to BT ... or sometimes going back a bit on the time slider starts the sound again, which makes me think it's Windows and not the amp, it has to be the lowest noise amp I've ever setup ever in my life, and due to everything here being DC, the bluetooth bypasses the noise put into the output from the laptop (my main source of entertainment) if connected via wires ... the DC to DC PSU puts a lot of noise through the mic/earphone/external speaker jack and no noise suppression device was ever able to fix it! truly decent amp and low cost and robust, had it over 2 yrs now.
Hello my friend, I'm sorry to ask you questions because I'm not in the game, can I use only a black 12V charger: DC 12V 5A power supply? can I put 2 mini speakers of 15W + one of 50W then I wanted to know how to connect a USB key to this device, that is to say which device should be connected to this amplifier to be able to listen to sound on a usb key, can you give me a link so that I can buy it on ali express? thank you for your answers.
For people have this question: the ZK-MT21 use x2 CS8673E, if you're interested to know more and if you speaker French go check my YT Chanel > About, there is a link for a GDoc full of information
@@EnzoE Hi. I don't speak French, but was able to translate your very comprehensive document into English. It is very comprehensive! One question, and this could be me being wrong about what you are saying, due to problems with the translation! You are recommending the ZK-MT21 over other TPA3116D2 based amps such as the XY-S100H, mostly because of the Chinese app related security concerns for models like the XY-S100H? Is that right? Thanks
Any idea to help me out? I tried with mid range speakers L/R and a small 30w ayima 3inch subwoofer. I used first 12v power supply and then tries 20v. both times midrange works great but subwoofer doesn't work right it sounds weird and warms up really quickly and with the 20v it blew little smoke also... Is the amp bad or what could be the problem?
amplifier only pulls the current it needs from psupply depending on the load. people tend to crank the volume at max so to keep the amplifier safe, use only 24V (7A to 8A max) or 10A but avoid maxing volume for long period.
I bought one ZK-MT21 recently. Its chips are : BT JL As21BP0C466-25A4(but can not find the data sheet from JL). 4 NE5532 OP amp. And 2 class D CS8673E. It works fine with good sound. However I faced one problem. If I connect it with AUX input, the sounds become mono not stereo. After debug for whole days. I found the EMI interference between CS8673E and BT chip. I have to disconnect the audio path (remove C15/C17) and input audio signal into main volume directly. Then I can get stereo and 2.1 output. Due to I onle use it for desk PC, no need BT connection. So it's ok to disconnect BT path. But I am wondering, why this ZK-MT21 can't play 2.1 (become 1.1) when using AUX input? Does any one see the same problem? Or this ZK-MT21 use the worse EMI chips?
A less than 5minutes working Amp..........just received mine yesterday put a 22VDC power supply (i noticed a spark on the DC Jack connector) then test it with BT connection and played with 1 song the bass and treble when adjusting are scratchy and the heatsink also is getting warmer but the sound it produced is very decent after playing the song i switched-off and assembled the rest of the part but when powering up again it puff a smoke then no more i removed the heatsink and found the two chips are badly burnt it has a fake TPA3116D2DADR this is the same brand and type of Amp that showed here or maybe mine is a copy. the TPA's can handle up to 26VDC that is why i wonder why it burnt out. so be aware of buying this Amp.
Sir can i use a 4ohm subwoofer or we need to use 8ohm subwoofer with giving power supply of 24v Please reply no one reply i am confuse and how much amp we provide to amplifire
I’ve used this lamp on several applications! Works awesome
Which lamp?
Don't use this model on a 24v solar system that supplies the voltage same as in the batteries during charging, blew the living bejeezous out the the 24v 4700uf cap, had to replace it with a 120v one, the rest of the circuit is ok up to 30v, it clipped even when supplying it 12v until I replaced the cap, higher voltage = higher output on this unit ... live off-grid and getting enough volume out of either 5v or 12v speakers aint always easy, caping this at a higher voltage makes it so even the lowest output device I connect to it has enough volume, one problem I have using it with a Windows 10 laptop via BT is if 2 sound sources occur at once (ie VLC and a streaming source both at once) ... no sound is heard if one of those sources stops till I switch to another speaker then back to BT ... or sometimes going back a bit on the time slider starts the sound again, which makes me think it's Windows and not the amp, it has to be the lowest noise amp I've ever setup ever in my life, and due to everything here being DC, the bluetooth bypasses the noise put into the output from the laptop (my main source of entertainment) if connected via wires ... the DC to DC PSU puts a lot of noise through the mic/earphone/external speaker jack and no noise suppression device was ever able to fix it! truly decent amp and low cost and robust, had it over 2 yrs now.
My favourite youtuber ❤️❤️❤️❤️😘
Nice amplifier
Good👍👍 performance.
Usb aur ir sensor iss board main keise connect korte hein ? Plz reply.
Hello my friend, I'm sorry to ask you questions because I'm not in the game, can I use only a black 12V charger: DC 12V 5A power supply? can I put 2 mini speakers of 15W + one of 50W then I wanted to know how to connect a USB key to this device, that is to say which device should be connected to this amplifier to be able to listen to sound on a usb key, can you give me a link so that I can buy it on ali express? thank you for your answers.
Can we connect directly to the car battery for amplifier power supply
12 to 24V DC, connect it wherever you want.
@@HEREISMULLEER It could be used in a 12v 5a motorcycle battery recharged by the same motorcycle
@@HEREISMULLEER And if I wanted to connect it to the 110v outlet, which adapter would be the best or a good one would be 24v 3a or one of 12v 3a
Sir this amp will using with the car recorder?
is this like an audio interface?
Biggest disadvantage is Aux input id mono and Bluetooth connection is so poor ...
Es para corriente 110? Se puede usar con 12v?
Sir,can i use Ac-Dc adapter(24V,5A) instead if smps?
Great video , but it misses the antena connection !!!!
Bom dia Posso usar uma Fonte Chaveada 24v 15a em um amplificador de som de 24v 5a que seria o
ZK-MT21.
Pwede sa battery boss
0.42 What is the code of opamp 4 ea?
Hi, did you know if the ZK-MT21 use the TPA3116D2 or another chip ?
For people have this question: the ZK-MT21 use x2 CS8673E, if you're interested to know more and if you speaker French go check my YT Chanel > About, there is a link for a GDoc full of information
I have received today this ZK-MT21 and there were two chips of ChipStar CS8673e
@@EnzoE Hi. I don't speak French, but was able to translate your very comprehensive document into English. It is very comprehensive!
One question, and this could be me being wrong about what you are saying, due to problems with the translation! You are recommending the ZK-MT21 over other TPA3116D2 based amps such as the XY-S100H, mostly because of the Chinese app related security concerns for models like the XY-S100H? Is that right?
Thanks
@@EnzoE this amplefier working at auto rickshaw 12wats,, battery.
Какой чип лучше ___CS8673e или TRA3116
Muito obrigada!! Muito obrigada!! Era tudo que eu precisava.👏👏👏🌹🌹🌹🌹🇧🇷🇧🇷🌹🌹👏👏👏🌹🌹👏👏🌹🌹
Mag Kano po?
How to connect or use a usb in a 3.5mm female plug
Any idea to help me out? I tried with mid range speakers L/R and a small 30w ayima 3inch subwoofer. I used first 12v power supply and then tries 20v. both times midrange works great but subwoofer doesn't work right it sounds weird and warms up really quickly and with the 20v it blew little smoke also... Is the amp bad or what could be the problem?
Maybe the ohm?
A lot people asking this amp keep breaking at 20v. I just bought this amp and i use 12v. And it heat sink feel warm. So i had to get colling fan
You used to big speakers you need to used small speakers 6 for mid and 4 for bass with a laptop charger 18v 3.5A
What is gud combination of power supply?
how much W i need on power suply to get max out of this AMP??
It goes to 24 v but i don´t know how many watts.
amplifier only pulls the current it needs from psupply depending on the load.
people tend to crank the volume at max so to keep the amplifier safe, use only 24V (7A to 8A max) or 10A but avoid maxing volume for long period.
Ok ba yan sa woofer speaker na 100 watts na 10 inches
Na try ko boss. 200 watts na subwoofer ng acoustic 10 inches. Kayang kaya pabayuhin
@@alexanderdave4821 amplifer is it used for auto rickshaw 12wats, battery
Sir kya ye board Sony d4p me use kar sakte he
Bro wt is the subwoofer watt and speaker watt
How do i connect 2 of these together to handle more speakers without cutting out
La única manera de usar 2 o más es por aux con unos puentes de cables aux
You buy the 250 watt version
Price plz 😢😢
inkocean.in/products/wuzhi-zk-mt21-bluetooth-5-0-subwoofer-amplifier-board-50wx2-100w-2-1-channel-power-audio-stereo-amplifier-tone-board-bass-amp-aux?ref=e7ixfoa59e
Price kya hai
Mere ko Lena hai kaise mile ga online me
What to do when it turns on the. Off
Can I Power supply it with 12 0 12 transformer
12-24v DC Power
Can i USE THIS AMPLIFIER for
ELECTRIC GUITAR. if you don't
reply i consider that you don't
know the answer.
Notification is too late bro
Can i use it abroad to 100V country?
yes but dont plug it directly into the wall socket.
I bought one ZK-MT21 recently. Its chips are : BT JL As21BP0C466-25A4(but can not find the data sheet from JL). 4 NE5532 OP amp. And 2 class D CS8673E.
It works fine with good sound. However I faced one problem. If I connect it with AUX input, the sounds become mono not stereo. After debug for whole days. I found the EMI interference between CS8673E and BT chip. I have to disconnect the audio path (remove C15/C17) and input audio signal into main volume directly. Then I can get stereo and 2.1 output. Due to I onle use it for desk PC, no need BT connection. So it's ok to disconnect BT path. But I am wondering, why this ZK-MT21 can't play 2.1 (become 1.1) when using AUX input?
Does any one see the same problem? Or this ZK-MT21 use the worse EMI chips?
how did you do it
i do have that problem too, is there something i can do to still have bt connection and stereo output?
I have the TB-21 , it has another chip, but has the mono problem once you connect and use the AUX port. Sounds terrible. Grrrr
Is amplifier ko display kaise laga sakte hai
What the size of this subwoofer?
4ohm, up to 100w
@@benjaminlussier a amplifer ko auto rickshaw battery se use karsakte.
Ye sab alag alag parts kaha par milte hai..... Please reply muje bhi aisa banana hai....
Link in discription
50W to určitě nemá a už vůbec ne 100W .Navíc to bude ve třídě D což se téměř nedá poslouchat ,to se možná hodí na nějaké levné rádio .
What is the song
Can i use FREDO 8 Inch Double Magnet-4 Ohms/RMS103W/Peak 725W Subwoofer-Black
Max 100w sub ...
@@pulkinpulman2028 amplifer is it used for auto rikshaw 12watts, battery.
A less than 5minutes working Amp..........just received mine yesterday put a 22VDC power supply (i noticed a spark on the DC Jack connector) then test it with BT connection and played with 1 song the bass and treble when adjusting are scratchy and the heatsink also is getting warmer but the sound it produced is very decent after playing the song i switched-off and assembled the rest of the part but when powering up again it puff a smoke then no more i removed the heatsink and found the two chips are badly burnt it has a fake TPA3116D2DADR this is the same brand and type of Amp that showed here or maybe mine is a copy. the TPA's can handle up to 26VDC that is why i wonder why it burnt out. so be aware of buying this Amp.
The back cover can go together with output on every chanel, better isolation between speaker output.
Price kitna hai
I like it bro 🤩🤩🤗👍👍
What is the price
Какой пароль на вай фай?
Can it support car batt 12v?
Yes but has to be a low amp battery
Takes 5/24v dc
@@yourlocalratz352de que amperaje debe manejar normalmente?? Puede ser 12v 5amp? O 7 amp
Get you some proper bookshelf speakers the test was awful
ты еще тоньше мог провода впаять туда?
Poor sound test
magkano
111 Brown Lane
Impressive
The ic is look like not original
Naearaju Nakka JBL I 200
🇮🇳🔊🔉🔈🙊🙉🇺🇿💯🗣🧖♀️
Sir can i use a 4ohm subwoofer or we need to use 8ohm subwoofer with giving power supply of 24v
Please reply no one reply i am confuse and how much amp we provide to amplifire
Subwoofer should be of 4ohms but you can use speakers of 8ohms
@@MukundShukla547 amplifer is it used for auto rikshaw 12wats battery
improve audio capture, buy more professional microphones for test recording
Nice
What is the price friend?
20-30$ on eBay
$27.98 on Amazon
เสียชับเบดม่ออก
To yah amplifier kabhi mat lena duplicate he Maine to do liya donon ic kharab ho Gaya he mera 5000 rupee kharab ho gaya he
no inducters crap model