I didn't know I needed this for my A3. I guess I'm adding Euro Spec tail lights to my ever-growing buylist for my car. Saved and bookmarked. I don't wanna lose this.
@@coalieroller5663 yes, I've seen kits on eBay and kufatec.de which supply plug and play solutions to many different mods for Audi/VW. I prefer to MOD with parts that are original if possible, since those parts often are better quality and especially with lighting they don't cause warning lights on your dash.
I had to take my passenger tail lights off because they got cracked in a minor accident. Anyhow, i got them used and the only thing i can add is the plastic rivet mentioned at approx 7:35, to put back in, you need to pull the middle pin almost all the way out, then push the rivet in all the way and then insert the middle pin all the way until it's flush with the top of the rivet. Then it creates a some what of locking mechanism
I'm still amazed by the US lights, it is just so confusing and dangerous to use red as turn signals (eg. when a car is partially visible), why can't VW just sell the euro lights over there? Is it a rule in the states that you have to use the same red as the brake lights? [facepalm]
No, it's not a law. There are plenty of vehicles with amber signals here too. But the German brands are the worst offenders to change them all to red indicators. I cannot imagine that is a cost savings to have 2 different parts.
It’s a law that us cars have to have a Certain amount of light when the turn signal is first turned on, so the dynamic light starts of as a tiny light then sweeps that’s why they also had to add the brake light coming on as well
Hi, i am using the US model of Audi A3 in UK. Please advice how to turn off amber parking light. Now the light is used for turning and for parking. I would like to turn off the parking light. Please advise how I can do this. Can you provide instructions for OBD11?
What about facelift cars that don't already have the dynamic turn signals? I have a 2017 A3 that has standard lights all around. Should I get the pre-facelift adapter or the facelift adapter for cars that already have the dynamic. Sorry I'm a bit confused
What about the 2016 (pre-facelift) A3 e-tron Sportback? Sequential or not, I’m just looking for Amber blinkers. And do your replacements account for the red DOT side position lamp which does not exist in Europe?
I did this swap a few months ago. I had to de-pin my connectors and swap them to the ROW versions in addition to running one extra wire between the inner and outers. Basically like the mk7 swap.
@@Deutscheautoparts hello I have a Audi a3 saloon 2016 in Europe and I want to order this adaptors but ask me if it’s red backlights or white I don’t what he means
1960s federal laws restrict lighting. Amber as a blinker only makes so much sense. The way our government works, (doesn't) we won't likely see a change for many years.
@@jamjamthejamman No, you can't be fined for amber. Most new Honda's all have amber signals. It has something to do with the physical size of the lighted area on the tail light that makes it not legal. So, the dynamic only portion is too thin and doesn't light everything at once (or not enough at once). Why they change it to red is unknown to me.
As an American it’s terrible. What’s even worse is brake lights that can double as turn indicators. Also, some turn indicators are mounted very low on vehicles it harder to see from vehicles with a higher ride height. All of my cars have amber turn signals, and if I bought a Euro car I’d change them.
Would love to know if you make one or can make a harness for a B8 S5 with LED prefacelift tailight to Facelift LED taillights US version. I’ve seen plenty of Euro version harnesses but all day they do not work with US version.
I owe a Audi S3 8V 2016 Pre-facelift Black Optics. I was unlocking via OBDEleven the Ambient lights Menu on the MMI to activate the foot well lights as I was getting ready to do the retrofit. As I have previously done the necessary coding and done Puddle lights retrofit and ambient lights in the door buckets this one are wired to the door window switch. I did all the activation reset the MMI and menu appear. I followed the guide on this thread: www.audi-sport.net/xf/threads/a3-8v-removing-j519-t46b-in-attempt-to-install-footwell-and-cupholder-lights.276625/ However two things happen, my dimmer switch on the dash does not work properly it doesn't lower the intensity during the day, only at night when the auto lights turn on, is when it works and my car is not getting any power to light the rear door window switch or the rear door ambient lights on the door buckets. The rear windows go up and down but they don't have lights anymore... I revert all I did via OBDEleven reset the MMI. Still not working.. I remove the rear door panels check all the wiring connections, they are good and plugged properly to the Module no damage or pinch cables I also check the main door wiring that plugs to the chassis pillar. Still not red lights on rear window switch. I check all car fuses also good. I have no idea how to fix this. When I was unlocking the ambient lights menu on the MMI, I never touch or code the rear or front doors because they were already coded. I'm really puzzle because everything should work fine since I reverted back the coding I did. And I double checked the history logs of what I did. I then long coded the rear doors with the original code prior to unlock puddle lights and got nothing. I try the code from after the puddle lights, prior to this issue and still nothing. I have cycle the doors during the coding and even disconnect the battery and still nothing. I unplugged the leds lights from the rear window switch and still nothing. At this point I'm considering getting new rear door Modules, or a new door wiring or new rear door window switches because I don't know what else to do. Any help would be greatly appreciated. I was thinking that perhaps we could figured it out how you could connect to my car remotely or something else to solve this problem. In getting this codes 19 Gateway System description: GW MQB High Software number: 5Q0907530AJ Software version: 2246 Hardware number: 5Q0907530M Hardware version: 212 Serial number: 21111510801872 ODX name: EV_GatewConti ODX version: 013020 Long coding: 0101000830085A005B00022C980B00000001010000000000000000000000 Subsystems: System description: E221 - MFL Software version: 0014 Hardware version: H02 Serial number: 16 11 2015 D0042979 Trouble codes: U020100 - Lost Communication With “Door Control Module C” static Date: 2020-11-27 22:52:13 Mileage: 76802 km Priority: 2 Malfunction frequency counter: 1 Unlearning counter: 253 Supply voltage, terminal 30: 14.1 V Terminal 15: On U020200 - Lost Communication With “Door Control Module D” static Date: 2020-11-27 22:52:13 Mileage: 76802 km Priority: 2 Malfunction frequency counter: 1 Unlearning counter: 253 Supply voltage, terminal 30: 14.1 V Terminal 15: On U112600 - Undefined control module No communication static Date: 2020-11-27 22:52:13 Mileage: 76802 km Priority: 2 Malfunction frequency counter: 1 Unlearning counter: 253 Supply voltage, terminal 30: 14.1 V Terminal 15: On U106A00 - Digital sound system control module No Communication static Date: 2020-11-27 22:52:13 Mileage: 76802 km Priority: 2 Malfunction frequency counter: 1 Unlearning counter: 253 Supply voltage, terminal 30: 14.1 V Terminal 15: On U112600 - Undefined control module No communication static Date: 2020-11-27 22:52:13 Mileage: 76802 km Priority: 2 Malfunction frequency counter: 1 Unlearning counter: 253 Supply voltage, terminal 30: 14.1 V Terminal 15: On U112400 - Data bus Additional installations detected static Date: 2020-11-27 22:52:13 Mileage: 76802 km Priority: 2 Malfunction frequency counter: 1 Unlearning counter: 253 Supply voltage, terminal 30: 14.1 V Terminal 15: On 5F Multimedia System description: MU-S-S-US Software number: 8V0035844C Software version: 0660 Hardware number: 8V0035844 Hardware version: 014 Serial number: A7A02411150378 ODX name: EV_MUStd6C3PASE ODX version: 002020 Long coding: 01730102FF0A000021220001001A00002F0002040180010006 Subsystems: System description: ControlUnit_B Software version: 0054 Hardware version: H41 Serial number: C1000009101500010043 System description: DU Std Software version: 0014 Hardware version: H49 Serial number: AUZ8Z9FY30F620 Trouble codes: U101400 - Control module incorrectly coded static Date: 2020-11-27 17:37:39 Mileage: 76801 km Priority: 4 Malfunction frequency counter: 1 Unlearning counter: 252 Dynamic environmental data: 02868B1017555555555555A8 B11CF53 - Tuner for satellite radio Deactivated static Date: 2020-11-27 17:37:40 Mileage: 76801 km Priority: 4 Malfunction frequency counter: 1 Unlearning counter: 252 Dynamic environmental data: 02868B2446FF000000FFFF00
I have a facelift a3. From what I understand I would need a totally new taillight assembly in order for the long coding to actually create the dynamic turn signals, or can I get away with just changing the wiring harness and long coding?
@@Deutscheautoparts ok I understand. What I don't get is why Audi couldn't have made it just a long coding thing and include the dynamic turn signals in the 17' a3's
Love the video! I'll be order these soon! Do you have a video on European Dynamic Headlights as well? I've seen a video here on TH-cam of a retrofit but wanted to know if you guys carry anything. That video can be found by searching "I facelifted / retrofitted my Audi S3 8v Headlights to the FL Version & THEY WORK!!" Thank you!
I have audi a3 2016 front headlights has the new led DRL the cool jaggedy style instead of the ugly smooth one and the tail lights are disappointingly halogen. Do I have a pre face lift or can I order the new 2020 led tail lights?
Hi Paul, i get US version from facelift model tail lights for my a3 2014 sedan. My question is if is possible to coding in EU version without flashing the brake lights once you turn on the direction lights?? Thank you in advance
I'd REALLY like to find a set like these, that sequence the turn signal through the inner AND outer lens for my 2012 Jetta SE. I've only found ones that sequence only in the outer lens. Anyone know if a set like these are available for my cay! Thanks!
Great video! Do you sell adapters to convert from halogen to LED? I have a 2009 A5 and want to put the 2011 LED taillights. Do you sell the adapters to those cables?
@Deutsche Auto Parts - Love your videos. They're always very informative and helpful. I just picked up a 2018 Audi S3 with Analog Gauge Cluster only to find out that it does not come with an engine coolant temperature indicator. Any recommendations for an external gauge? Whether it's an OBDII powered gauge or analog? Thanks.
@@Deutscheautopartswait what? I’m so confused. I have a 2018 Audi a3 with FL Led tail lights without the dynamic signals. I bought the harness and did the coding but it didn’t work at all?
@@J_A_N_N_I_K_ ah, was guessing that lol. looks like you might be allowed to in sweden, but usually there are not really a lot of things you are allowed to change on new cars in general
Hi, I recently installed Blackline sequential tail lights into my A5 Coupe (2017, post facelift), have found that little plastic bracket is blocking me also. I'm in the UK and would like to have the sequential lights, but either way need to able to connect the inner rear lights (outer ones were plug and play). Could you advise what my options are, hoping to avoid coding? Thank you, great video!
Dynamic tail lights are a horrible idea for hazard lights. Turn signal, sure, but when you're broken doen on the highway and use these people typically don't associate animated tail lights with "EMERGENCY, GET OUT OF THIS LANE" at 70 mph. I speak from LEO experience.
![TOP 10 OBDeleven Must Do TRICKS For AUDI & VW! [ A3 | S3 | RS3 | GTI | Golf R ]](http://i.ytimg.com/vi/ypzXUZWMu-4/mqdefault.jpg)
![TOP 10 OBDeleven Must Do TRICKS For AUDI & VW! [ A3 | S3 | RS3 | GTI | Golf R ]](/img/tr.png)
I didn't know I needed this for my A3. I guess I'm adding Euro Spec tail lights to my ever-growing buylist for my car.
Saved and bookmarked. I don't wanna lose this.
did you do it?
I always wanted to change my taillights on my 2018 Audi A3. Great video. Now i need to order the lights. Thanks for sharing.
if only the install on the mk7 golf was this easy
I was about to write the exact same thing🤣😂
True story
13:00 Euro LED Tail Lights Coding
Looking to do this on my A5 Sportback :) A lot of people called this "nonchalant" when it was introduced on new Audis :)
new Audi's? I have it since 2014 on my Audi (2015 demo Audi TT-S)
@@VuBeClan so in 2014 it was new, right?
vcp, minor wiring, new tail light assemblies required
@@coalieroller5663 yes, I've seen kits on eBay and kufatec.de which supply plug and play solutions to many different mods for Audi/VW. I prefer to MOD with parts that are original if possible, since those parts often are better quality and especially with lighting they don't cause warning lights on your dash.
Can I just get the harness for my 2016 A3 or do I need to get new tail lights too?
I had to take my passenger tail lights off because they got cracked in a minor accident. Anyhow, i got them used and the only thing i can add is the plastic rivet mentioned at approx 7:35, to put back in, you need to pull the middle pin almost all the way out, then push the rivet in all the way and then insert the middle pin all the way until it's flush with the top of the rivet. Then it creates a some what of locking mechanism
I'm still amazed by the US lights, it is just so confusing and dangerous to use red as turn signals (eg. when a car is partially visible), why can't VW just sell the euro lights over there?
Is it a rule in the states that you have to use the same red as the brake lights? [facepalm]
No, it's not a law. There are plenty of vehicles with amber signals here too. But the German brands are the worst offenders to change them all to red indicators. I cannot imagine that is a cost savings to have 2 different parts.
It’s a law that us cars have to have a Certain amount of light when the turn signal is first turned on, so the dynamic light starts of as a tiny light then sweeps that’s why they also had to add the brake light coming on as well
Because they want to do everything differently
@@seanmac7989 Believe me - that thin orange indicator itself is really well visible. Greetings from EU ;)
Hi, i am using the US model of Audi A3 in UK. Please advice how to turn off amber parking light. Now the light is used for turning and for parking. I would like to turn off the parking light. Please advise how I can do this. Can you provide instructions for OBD11?
What about facelift cars that don't already have the dynamic turn signals? I have a 2017 A3 that has standard lights all around. Should I get the pre-facelift adapter or the facelift adapter for cars that already have the dynamic. Sorry I'm a bit confused
My s3 might need that
We heard it does.... badly ; )
Do you have sequential taillights for a 14 Audi A5 B8.5
What about the 2016 (pre-facelift) A3 e-tron Sportback? Sequential or not, I’m just looking for Amber blinkers. And do your replacements account for the red DOT side position lamp which does not exist in Europe?
I did this swap a few months ago. I had to de-pin my connectors and swap them to the ROW versions in addition to running one extra wire between the inner and outers. Basically like the mk7 swap.
Nice! We were able to make this one work with no inner out wire running
Will the harness work with OEM FL tails from RS3 if we don't care about the Amber turn signal and just want separate brake and turn signal?
No as the pin outs on the wires are different
@@Deutscheautoparts hello I have a Audi a3 saloon 2016 in Europe and I want to order this adaptors but ask me if it’s red backlights or white I don’t what he means
Is it possible to make clear tails out of stock 2015 Audi A3 tail lights?
Damn I wish you guys had a LED headlamp upgrade available :( I hate having HID.
Do Americans prefer the red indicators? I'm not a fan at all. Or maybe I'm just used to amber
1960s federal laws restrict lighting. Amber as a blinker only makes so much sense. The way our government works, (doesn't) we won't likely see a change for many years.
@@Alexkidd117 Ah ok, that makes sense. Can you get a defect notice or fined for having amber ?
@@jamjamthejamman No, you can't be fined for amber. Most new Honda's all have amber signals. It has something to do with the physical size of the lighted area on the tail light that makes it not legal. So, the dynamic only portion is too thin and doesn't light everything at once (or not enough at once). Why they change it to red is unknown to me.
As an American it’s terrible. What’s even worse is brake lights that can double as turn indicators. Also, some turn indicators are mounted very low on vehicles it harder to see from vehicles with a higher ride height. All of my cars have amber turn signals, and if I bought a Euro car I’d change them.
That rear end...🤤
If I have an A3 with neither dynamic turn signal I would order the first link?
Would love to know if you make one or can make a harness for a B8 S5 with LED prefacelift tailight to Facelift LED taillights US version. I’ve seen plenty of Euro version harnesses but all day they do not work with US version.
DO YOU HAVE A FIX FOR THE SILL LIGHTS DRIVER SIDE NOT WORKING?
Can you do the dynamic on the front lights
Do I need to code it? Can’t I send a siquential turn signal if I don‘t?
Do you think you can do this on my A3 2017 ?
Can you tell how to do that on a A4 B9? I want to change from normal halogen to led. Can you recomand some adapters? Thank you!
Waiting for you guys to get that ea888 gen 3 steel oil pain back in stock!
Hi just want to find out if that ine touch application was requested and built by OBD eelven
Can you install the LED day lights front and dynamic back on an 2021 Q3 SB?
Can the existing US Facelift Tailights be coded for this? I dont need the amber signals, just the EU style.
No. The NA tail lights are hard wired that way and cannot be changed.
So watching this video I have a question, do you guys only do the rear sequential turn signals or you do the front as well?
Need help!
Does anyone have codings for dynamic lights with 16-21 coding lines for US 2018 8v?
I’m in that same boat rn🥲
I've got a 17 S3 with sequential turn signals, how do I eliminate the brake light when I use the turn signal
hello i want to buy the lights from 1:36 but on wich link do i need to click to get the correct ones
I owe a Audi S3 8V 2016 Pre-facelift Black Optics.
I was unlocking via OBDEleven the Ambient lights Menu on the MMI to activate the foot well lights as I was getting ready to do the retrofit. As I have previously done the necessary coding and done Puddle lights retrofit and ambient lights in the door buckets this one are wired to the door window switch.
I did all the activation reset the MMI and menu appear.
I followed the guide on this thread: www.audi-sport.net/xf/threads/a3-8v-removing-j519-t46b-in-attempt-to-install-footwell-and-cupholder-lights.276625/
However two things happen, my dimmer switch on the dash does not work properly it doesn't lower the intensity during the day, only at night when the auto lights turn on, is when it works and my car is not getting any power to light the rear door window switch or the rear door ambient lights on the door buckets. The rear windows go up and down but they don't have lights anymore...
I revert all I did via OBDEleven reset the MMI. Still not working..
I remove the rear door panels check all the wiring connections, they are good and plugged properly to the Module no damage or pinch cables I also check the main door wiring that plugs to the chassis pillar. Still not red lights on rear window switch. I check all car fuses also good.
I have no idea how to fix this. When I was unlocking the ambient lights menu on the MMI, I never touch or code the rear or front doors because they were already coded. I'm really puzzle because everything should work fine since I reverted back the coding I did. And I double checked the history logs of what I did.
I then long coded the rear doors with the original code prior to unlock puddle lights and got nothing. I try the code from after the puddle lights, prior to this issue and still nothing. I have cycle the doors during the coding and even disconnect the battery and still nothing. I unplugged the leds lights from the rear window switch and still nothing.
At this point I'm considering getting new rear door Modules, or a new door wiring or new rear door window switches because I don't know what else to do.
Any help would be greatly appreciated. I was thinking that perhaps we could figured it out how you could connect to my car remotely or something else to solve this problem.
In getting this codes
19 Gateway
System description: GW MQB High
Software number: 5Q0907530AJ
Software version: 2246
Hardware number: 5Q0907530M
Hardware version: 212
Serial number: 21111510801872
ODX name: EV_GatewConti
ODX version: 013020
Long coding: 0101000830085A005B00022C980B00000001010000000000000000000000
Subsystems:
System description: E221 - MFL
Software version: 0014
Hardware version: H02
Serial number: 16 11 2015 D0042979
Trouble codes:
U020100 - Lost Communication With “Door Control Module C”
static
Date: 2020-11-27 22:52:13
Mileage: 76802 km
Priority: 2
Malfunction frequency counter: 1
Unlearning counter: 253
Supply voltage, terminal 30: 14.1 V
Terminal 15: On
U020200 - Lost Communication With “Door Control Module D”
static
Date: 2020-11-27 22:52:13
Mileage: 76802 km
Priority: 2
Malfunction frequency counter: 1
Unlearning counter: 253
Supply voltage, terminal 30: 14.1 V
Terminal 15: On
U112600 - Undefined control module No communication
static
Date: 2020-11-27 22:52:13
Mileage: 76802 km
Priority: 2
Malfunction frequency counter: 1
Unlearning counter: 253
Supply voltage, terminal 30: 14.1 V
Terminal 15: On
U106A00 - Digital sound system control module No Communication
static
Date: 2020-11-27 22:52:13
Mileage: 76802 km
Priority: 2
Malfunction frequency counter: 1
Unlearning counter: 253
Supply voltage, terminal 30: 14.1 V
Terminal 15: On
U112600 - Undefined control module No communication
static
Date: 2020-11-27 22:52:13
Mileage: 76802 km
Priority: 2
Malfunction frequency counter: 1
Unlearning counter: 253
Supply voltage, terminal 30: 14.1 V
Terminal 15: On
U112400 - Data bus Additional installations detected
static
Date: 2020-11-27 22:52:13
Mileage: 76802 km
Priority: 2
Malfunction frequency counter: 1
Unlearning counter: 253
Supply voltage, terminal 30: 14.1 V
Terminal 15: On
5F Multimedia
System description: MU-S-S-US
Software number: 8V0035844C
Software version: 0660
Hardware number: 8V0035844
Hardware version: 014
Serial number: A7A02411150378
ODX name: EV_MUStd6C3PASE
ODX version: 002020
Long coding: 01730102FF0A000021220001001A00002F0002040180010006
Subsystems:
System description: ControlUnit_B
Software version: 0054
Hardware version: H41
Serial number: C1000009101500010043
System description: DU Std
Software version: 0014
Hardware version: H49
Serial number: AUZ8Z9FY30F620
Trouble codes:
U101400 - Control module incorrectly coded
static
Date: 2020-11-27 17:37:39
Mileage: 76801 km
Priority: 4
Malfunction frequency counter: 1
Unlearning counter: 252
Dynamic environmental data: 02868B1017555555555555A8
B11CF53 - Tuner for satellite radio Deactivated
static
Date: 2020-11-27 17:37:40
Mileage: 76801 km
Priority: 4
Malfunction frequency counter: 1
Unlearning counter: 252
Dynamic environmental data: 02868B2446FF000000FFFF00
I have a facelift a3. From what I understand I would need a totally new taillight assembly in order for the long coding to actually create the dynamic turn signals, or can I get away with just changing the wiring harness and long coding?
New lights are required.
You need new lights for sure
@@Deutscheautoparts ok I understand. What I don't get is why Audi couldn't have made it just a long coding thing and include the dynamic turn signals in the 17' a3's
Will the harness work on 2017 US B9 A4?
can i do a conversion from halogen rear tail lights to led oem ones, my A3 is 2013. Can this be done without to much trouble?
Love the video! I'll be order these soon! Do you have a video on European Dynamic Headlights as well? I've seen a video here on TH-cam of a retrofit but wanted to know if you guys carry anything. That video can be found by searching "I facelifted / retrofitted my Audi S3 8v Headlights to the FL Version & THEY WORK!!"
Thank you!
Hi, what diffuser is that on the red A3 ? could you provide a link to that as well ? thank you
when will you have a sequential rear system for a 2016 post facelift A5?
I know it would probably be a lot smaller market than s3/rs3, but could you do one for Euro OLED/dynamic for tts/tt rs?
I have audi a3 2016 front headlights has the new led DRL the cool jaggedy style instead of the ugly smooth one and the tail lights are disappointingly halogen. Do I have a pre face lift or can I order the new 2020 led tail lights?
Hi Paul, i get US version from facelift model tail lights for my a3 2014 sedan.
My question is if is possible to coding in EU version without flashing the brake lights once you turn on the direction lights??
Thank you in advance
Does that diffuser require a special bumper or does it work with the pre-facelift non-S-Line model? I have a 2015 Audi A3 Quattro.
I'd REALLY like to find a set like these, that sequence the turn signal through the inner AND outer lens for my 2012 Jetta SE. I've only found ones that sequence only in the outer lens. Anyone know if a set like these are available for my cay! Thanks!
That needs flat drivers?
Thanks for the tutorial
What would be the procedure on
US 2018 A3 Quattro Premium
The red car; which diffuser is that?? TIA
Off topic but do you happen to have a link to the cf spoiler?
Great video! Do you sell adapters to convert from halogen to LED? I have a 2009 A5 and want to put the 2011 LED taillights. Do you sell the adapters to those cables?
Can this be put on audi a3 2015 sedan?
Do you have that option for A3 8p 2006?
Do they make these for the A4/s4 b8.5 facelift?
Would these work with the US Facelift Tailights with out getting the european tails?
yeah thats what i was thinking. it would be worth it if it only needs coding.
@@ChinmayJade yea if it would be just plug and play that would be great cant wait to see what they say :D
You cannot code the US (NA North American) tail lights to do that. The brake light flash with turn is hard wired within the lights themselves
Have dynamic lights as standard on my 2017 Golf GTE
I have seen euro tail lights for my 2015 facelift Jetta but will the wire harness work for my car since Audi and VW are similar?
Nope these are very specific
Jetta when?
Do you have anything like this for the MK7 Jetta GLI?
Wait so what is the face lift and non face lift vehicles ? PS I’ve been looking into buying a 2016 s3 is that a facelift model ?
Is there a mod like this for the 2012 A7?
@Deutsche Auto Parts - Love your videos. They're always very informative and helpful. I just picked up a 2018 Audi S3 with Analog Gauge Cluster only to find out that it does not come with an engine coolant temperature indicator. Any recommendations for an external gauge? Whether it's an OBDII powered gauge or analog? Thanks.
Do you have one for 2014 S5?
Any for Audi TT mk3
I can just buy the harness right!
Yup
@@Deutscheautopartswait what? I’m so confused. I have a 2018 Audi a3 with FL Led tail lights without the dynamic signals. I bought the harness and did the coding but it didn’t work at all?
Hellphase - Hell Yeah.. laughs in german.. 👌
Yeah I feel silly even trying
Made my day😂
@@Deutscheautoparts No it's fine. We butcher english words too. No worries.
@@hng_360 I butcher English words and it's my first ( and only ) language
Zawsze można zrobić modyfikacje z kierunkowskazów usa > europa
It be nice to see how to replace that horrible dsg transmission with a 6 speed manual.
How about for the s4 is there a video
What year?
2015 s4
@@Deutscheautoparts 2015 s4
I need this for my europeam VW Golf 7 Estate (variant) - pleaseee..
will the harness work on 2015 s3 in ireland
Sorry tough to know. These are specifically developed for US models.
I doubt it would be full dynamic instead semi which you can enable by obd11.
I want s lights on the front.
In Germany we would say: "Betriebserlaubnis erloschen" XD
What do you mean?
@@brreeaad
in germany it is not allowed to retrofit such rear lights with dynamic indicators
@@J_A_N_N_I_K_ ah, was guessing that lol. looks like you might be allowed to in sweden, but usually there are not really a lot of things you are allowed to change on new cars in general
Hi, I recently installed Blackline sequential tail lights into my A5 Coupe (2017, post facelift), have found that little plastic bracket is blocking me also. I'm in the UK and would like to have the sequential lights, but either way need to able to connect the inner rear lights (outer ones were plug and play). Could you advise what my options are, hoping to avoid coding? Thank you, great video!
i need coding
Over $1k just to have amber markers 🤣🤣🤣
Kind of dumb not to show the comparisons side by side.
When you have a tediously boring car to look at, add kids fairy lights. 🤣🤣🤣
Schmutz
Dynamic tail lights are a horrible idea for hazard lights. Turn signal, sure, but when you're broken doen on the highway and use these people typically don't associate animated tail lights with "EMERGENCY, GET OUT OF THIS LANE" at 70 mph. I speak from LEO experience.