Some teachers tell everything. This video tells you what you need to know, when to know it, and how to get it done. Excellent! He filters out the everything to the practical thing! Good job. Thanks! And yes, I subscribed!
I have a design that I did in AutoCAD that is solid infilled that I want to import into RDWorks so that I can Engrave the full infill, I have it set to scan but when I import the dxf it only shows the perimeter how to I get the full infilled design to engrave? again It is set to scan.
Thank you for the explanation.... I am going through what you are going through right now with this software... it's a learning curve... it is no WYSIWYG
Hello, How do you tell the software or machine where you want to place the image? If i set a wood piece in the machine and have an image on my screen can i tell the machine my starting point or does the machine tell me because of the placement on the software.
hi i noticed your control panel is the same as on the machine ive just bought. i have my machine set up and ready to go but the instructions i have to connect it to the computer show a totally different control panel. i have the pirahna 5060. do you know is this machine is just plug and play with the usb cable or do i need to set it up with an ethernet cable and if so how do i get the pc to recognise the machine? thank you for any help you can give me Maggi
Help me please. Wile engraving, my laser´s head is swinging all way left and right just to engrave a little draw in the middle. Something related with acceleration...but I cant increase speed. What user setting do you use? Thanks.
@@rere-hv9jg a guy send me the file with original vendor and user settings. Saved me. Now thats ok. The only problem I have is that the engrave (scan) seems like fish scame...not smooth. :(
Hello! Is there any way to use inches instead of millimeters with this software? I heard in this tutorial that there wasn't, but not sure if any latest releases fixed that.
Question. If I want to draw rectangle with a circle in center and only scan / engrave the area around the circle to the boundaries of the rectangle but not in the circle. How would I do this.
Hi, great Video! I am having the worst luck trying to get the laser to fire while running it’s rd file. Does the motions good, but beam doesn’t start. Button is down and the test button does fire the beam. Please help (-:
This is the link for version 18 (the latest "public" release): en.rd-acs.com/Private/Files/add732140c983267.rar and for version 26 (the latest release): www.rd-acs.com/Private/Files/4908845ca495053b1a9b.rar You can use 7-Zip File manager to unpack them.
Как работать в программе RDworks v8Гарден Групп - Производство, продажа и сервисное обслуживание станков для деревообработки и металлообработки по территории РФ и СНГ
Some teachers tell everything. This video tells you what you need to know, when to know it, and how to get it done. Excellent! He filters out the everything to the practical thing! Good job. Thanks! And yes, I subscribed!
Hey thanks for the video. The software isn't very intuitive, so this helped alot.
how do i flip my x axis mirror, can not find in config running 8.01.54
thank you so much. for all your hard work and teaching.
I have a design that I did in AutoCAD that is solid infilled that I want to import into RDWorks so that I can Engrave the full infill, I have it set to scan but when I import the dxf it only shows the perimeter how to I get the full infilled design to engrave? again It is set to scan.
Love from India . The video helped a lot. :) Thanks !
do you need to convert the Ai to dxf first or can just place it in Ai format?
Thank you for the explanation.... I am going through what you are going through right now with this software... it's a learning curve... it is no WYSIWYG
Thank you so much for making this video. It reminds me of RDW for Dummies. =)
thanxs, greetz from the netherlands #teacher technics
Question, how do you change an image that is grey to black so it will pick it up and scan?
Do you know why I am not able to change work area in page setting?. It always comes back to 380mm as default for both x and y axis.
Can you help me how to set correct horizon mirror & vertical mirror in Rd works software
Hello,
How do you tell the software or machine where you want to place the image?
If i set a wood piece in the machine and have an image on my screen can i tell the machine my starting point or does the machine tell me because of the placement on the software.
hi i noticed your control panel is the same as on the machine ive just bought. i have my machine set up and ready to go but the instructions i have to connect it to the computer show a totally different control panel. i have the pirahna 5060. do you know is this machine is just plug and play with the usb cable or do i need to set it up with an ethernet cable and if so how do i get the pc to recognise the machine? thank you for any help you can give me
Maggi
Under Config(s), File Para Setting, DXF Unit change to INCH then under unit type change to inch
so Beautiful........
Can you show us How to use dithering in EDworks?
Help me please.
Wile engraving, my laser´s head is swinging all way left and right just to engrave a little draw in the middle.
Something related with acceleration...but I cant increase speed.
What user setting do you use?
Thanks.
@@rere-hv9jg a guy send me the file with original vendor and user settings. Saved me. Now thats ok.
The only problem I have is that the engrave (scan) seems like fish scame...not smooth. :(
Hey how did you get such a bright red light ?
what did you put the model as in rd works?
Thanks dude, u helped me a lot with the layers thing
Hello!
Is there any way to use inches instead of millimeters with this software?
I heard in this tutorial that there wasn't, but not sure if any latest releases fixed that.
Hello!
Is there any way to use inches instead of millimeters, which version do you use?
I like the software that from the very start has everything you need, that even in 4 years it's still the same
Super helpful. Thx!
Question. If I want to draw rectangle with a circle in center and only scan / engrave the area around the circle to the boundaries of the rectangle but not in the circle. How would I do this.
Look up youtuber SarbarMultimedia he has great tutorials as well and speaks of your question
Great video!
Thanks!
How we can text on path, for example circular text. Thanks and respect from Turkey
Look up youtuber SarbarMultimedia he has great tutorials as well
Hi, great Video! I am having the worst luck trying to get the laser to fire while running it’s rd file. Does the motions good, but beam doesn’t start. Button is down and the test button does fire the beam. Please help (-:
Look up youtuber SarbarMultimedia he has great tutorials as well or Oscar Arredondo
Hello do you « frame » your job? Thank you very Helpfull video
GOOD JOB
Yes... this version supports standard measurements.
Metric measurement is standard measurement. Very few countries still use archaic imperial measurement (feet & inches)
I’m getting water error.. anyone have an idea why?
how can we cut in the frame size
will this work with the K40 laser?
Yes, it should if you have the same controller
can you Give me rdworks software ?
I have tried to download this RDWorks file but it will not load, is there a special trick to downloading it?
Where are you trying to download the file from?
I can't remember. I hit download and it was always something else that downloaded. Screwed my PC up.
Thanks for the response.
This is the link for version 18 (the latest "public" release):
en.rd-acs.com/Private/Files/add732140c983267.rar
and for version 26 (the latest release):
www.rd-acs.com/Private/Files/4908845ca495053b1a9b.rar
You can use 7-Zip File manager to unpack them.
Thank you.
how I can cut from import files? is only scan
It depends on the type of file you import. Bitmap files can only scan. If the file type is in CAD format (dxf) you can cut.
can I use it with a cheap chinese 40W laser?
Probably not. RDWorks only works with Ruida controllers. Most 40W lasers use a Leetro controller.
Thanks so much
6 years later, how similar is this now?
I’m still using the same version of software with minimal issues.
Thank you! I'll give it a watch
Buckridge Mount
Camille Crossing
Welch Cliff
Sylvia Flats
Not clear screen
Conn Shores
Barton Manor
Quitzon Harbors
Mayert Glen
Brekke Center
Mercedes Road
Pierre Pine
Felipe Mall
HOW TO CHANGE OUR FONT STYLE
Della Rest
Abbott Flat
Conn Meadow