@@EvanGoyuk great video man, definitely glad i subscribed. I expected a typical car channel but was glad to see the quality of the videos were above average! Keep it up! 🤙
Also was thinking to buy valvetronic exhaust, but bought oem m5, didn’t install yet. M5 oem exhaust also has open valve with vacuum, bought also aftermarket plastic diffuser, but heard that then impossible will be to use comfort trunk access, and bought after that oem m5 diffuser and also people use to cut plastic bumper reinforcement to make custom diffuser. Decided to buy oem m5 bumper reinforcement with comfort access, now only need time to go to bodyshop to repaint diffuser to black or oem color of car and install m5 exhaust, also bought separately that box with hoses which makes vacuum, but heard that u can use vacuum brake from front bring hose and just put small valve which will open or close hose in that case you will get oem style like 550 and m5 has. These exhaust I heard that after a bit time will begin get rusty inside and it’s very thin metal and because of that it will not give a deep good sound, that’s why decided to go with oem m5
@@EvanGoyuk I went with highflow fabspeed makes them and it still passes inspection and no smell when warmed up its just as catless,..vrsf catted highflow will always give a slight smell when your stopped but not noticable when driving I currently have the fabspeed its pricey tho
@@EvanGoyuk vrsf makes one but it's catless for yours, fabspeed doesn't make one surprisingly, but I do know that if you get a good tuner with the catless dp the smell decreases alot than if you had no tune
Can you include more exhaust clips in the next vid you do? Wondering if there's a shifting burble when you have the valve open, and how the drive offs with valve closed/open...
@@EvanGoyuk Is it lci ? I dont think pre-lci get shifting burbles with just a muffler delete or valve (I'm planning to buy a pre-lci one so im curious)
I love the Valvetronic muffler. I would love to get them for my 535i, but I’m scared will the muffler make the car quieter even with the valve open. Is the car quieter with the valve mufflers ? Also great video.
Valve cover being closed is supposed to make your car quieter or stock. Valve cover being open is like a muffler delete plus if u have downpipes or a resonator delete. Basically what ever your exhaust system is you can make it loud or quiet whenever you want
I just bought a pair for my charger and hoping to have it installed by next week. How did you program it to work with your garage door openers because I really want to do that too
@@jonathanramos1189 I don't I'm not a social media guy but somehow I've gotta get downloaded so others can hear because I believe I'll be the first to do this on the type s, so I'll try, my mufflers arrive tomorrow then I plan to get them installed by the performance shop called XLR8 in Connecticut
So I am seeing they don't include the controller to open/close valves at +$1,200 for a midpipe....kind of ridiculous when their name is VALVEtronic. How am I suppose to close the valve without it?
Question about the tap a fuse!!! I bought one but I believe it’s max amps is 10A. The rear defroster is 30A. I assume I need to get a higher amp tap a fuse circuit. Otherwise, any issues with the connection? Is there anything I need to look out for? Thanks.
After further research I found that the “10A rating only applies to the added fuse, and not the source fuse.” So I can get away with using this “add-a-fuse” circuit while using a 10a fuse for the exhaust, and keeping the 30a fuse for the rear defroster.
@@EvanGoyuk I'm definitely installing it but there is not much videos on yt about how it sounds... all of them are with downpipe combined and we can't do that here in europe :(
Just like programming your garage door opener. You press and hold buttons 1 and 3. The press the button you want to assign and the button on the valvetronic remote
@@EvanGoyuk thanks! i just installed a similar setup but with valved vacuum cut outs before the mufflers. So catless dp then these right before the stock mufflers. With the valves closed it sounds stock still as the stock mufflers are so restrictive, but once i open them... man its so loud and sounds amazing LOL. I would never be able to run a muffler delete and catless dp tho as the drone at 18-1900 rpms is horrific. Valved is def the way to go
@@EvanGoyuk yeah im not sure how it would be with those mufflers u got now, but from the stock mufflers, you couldnt even tell i installed a dp. Just the cold start was loud for 15 seconds and wide open throttle was a bit louder. Other than that stock AF.
Excellent work... I have a 2013 535i m sport and after watching your video I've decided to go this route.. Thanks for all your help
Sorry i didnt see this earlier man, im the guy that did the welding for you. We're glad you're happy and really appreciate the shout out!
Thanks for the work. Very happy with the results!
@@EvanGoyuk great video man, definitely glad i subscribed. I expected a typical car channel but was glad to see the quality of the videos were above average! Keep it up! 🤙
Thank you!
Still working there?
@@tristancefail i am!
thanks. Your video helped me. I use the buttons on the mirror to activate the exhaust✌️
Love the guys down at Lou's always a good deal and an even better exhaust
Let’s goooo bro! 🔥 #ValvetronicTheWorld
Evan you are my favourite youtuber greeting from bulgaria
Thank you!
So far so good only video that you can’t watch and understand about this mufflers
Also was thinking to buy valvetronic exhaust, but bought oem m5, didn’t install yet. M5 oem exhaust also has open valve with vacuum, bought also aftermarket plastic diffuser, but heard that then impossible will be to use comfort trunk access, and bought after that oem m5 diffuser and also people use to cut plastic bumper reinforcement to make custom diffuser. Decided to buy oem m5 bumper reinforcement with comfort access, now only need time to go to bodyshop to repaint diffuser to black or oem color of car and install m5 exhaust, also bought separately that box with hoses which makes vacuum, but heard that u can use vacuum brake from front bring hose and just put small valve which will open or close hose in that case you will get oem style like 550 and m5 has. These exhaust I heard that after a bit time will begin get rusty inside and it’s very thin metal and because of that it will not give a deep good sound, that’s why decided to go with oem m5
That sounds bad ass 🤌🏼
how are the valves holding up over time? any rattling or issues?
How did you program it with the garage opener buttons?
What's the exhaust pipe size for the 2016 f10 535i drive model? And can you install quad tips on these mufflers?
Did you cut the vacuum line provided by valvetronic into three lines so you could run it to both mufflers?
I wanna get this for my 21 Acura TLX type s, will it get much louder? and also I heard you say it's just like a muffler delete
Man that sounds sweet! How's it holding up?
Hello sir, this is a great video! I have one question though, is there any drone in the interior with the valves closed?
Not at all
11:53 your welcome
Greetings from Boston lol I got the same brand can't wait till I recive it
It’s a great exhaust wondering if I should get a catless down pipe but I am concerned about the smell
@@EvanGoyuk I went with highflow fabspeed makes them and it still passes inspection and no smell when warmed up its just as catless,..vrsf catted highflow will always give a slight smell when your stopped but not noticable when driving I currently have the fabspeed its pricey tho
They make one for the f10 535?
@@EvanGoyuk vrsf makes one but it's catless for yours, fabspeed doesn't make one surprisingly, but I do know that if you get a good tuner with the catless dp the smell decreases alot than if you had no tune
Can you include more exhaust clips in the next vid you do? Wondering if there's a shifting burble when you have the valve open, and how the drive offs with valve closed/open...
Yes I can. Yes it has a shifting burble when valves are up in sport mode
@@EvanGoyuk Is it lci ? I dont think pre-lci get shifting burbles with just a muffler delete or valve (I'm planning to buy a pre-lci one so im curious)
If the valves are closed where is the smoke going?
Hi, does it sound like airblow sound on WOT?
Do you still have the stock resonators?
How much did you pay to get the exhaust installed?
I love the Valvetronic muffler. I would love to get them for my 535i, but I’m scared will the muffler make the car quieter even with the valve open. Is the car quieter with the valve mufflers ? Also great video.
Valve cover being closed is supposed to make your car quieter or stock. Valve cover being open is like a muffler delete plus if u have downpipes or a resonator delete. Basically what ever your exhaust system is you can make it loud or quiet whenever you want
Sounds like it’s rattling with valves closed. Sounds really bad. Valves open is good but closed it doesn’t sound right 😅
I just bought a pair for my charger and hoping to have it installed by next week. How did you program it to work with your garage door openers because I really want to do that too
Did you like it? I just purchased it for my 21 Acura TLX Type s
@@djsthemetereman do you have IG so I can see/hear how yours its gonna sound, I'm trying to buy a set of these mufflers
@@jonathanramos1189 I don't I'm not a social media guy but somehow I've gotta get downloaded so others can hear because I believe I'll be the first to do this on the type s, so I'll try, my mufflers arrive tomorrow then I plan to get them installed by the performance shop called XLR8 in Connecticut
@@djsthemetereman 💯
Hey man I’m about to buy the exhaust for my 535i and I was wondering did you get the 2.5 inch or the 3 inch?
2.5 inch
So I am seeing they don't include the controller to open/close valves at +$1,200 for a midpipe....kind of ridiculous when their name is VALVEtronic. How am I suppose to close the valve without it?
Question about the tap a fuse!!! I bought one but I believe it’s max amps is 10A. The rear defroster is 30A. I assume I need to get a higher amp tap a fuse circuit. Otherwise, any issues with the connection? Is there anything I need to look out for? Thanks.
After further research I found that the “10A rating only applies to the added fuse, and not the source fuse.” So I can get away with using this “add-a-fuse” circuit while using a 10a fuse for the exhaust, and keeping the 30a fuse for the rear defroster.
One question, how do I know which way to install the “add a circuit”? Which terminal would be the hot side.
Fuse 10A or 30A??
Nice video bro, how much did they cost you without upgrade expenses?
And I would love to hear few revs with it :D
I do not remember the cost I believe around $700
@@EvanGoyuk I'm definitely installing it but there is not much videos on yt about how it sounds... all of them are with downpipe combined and we can't do that here in europe :(
It sounds very good
Does it sound stock when they are closed?
Yes maybe a tad quieter!
Any power gain.
Not that I notice since my cat is still installed
You can't partially open the valves?
No
Our valvetronic mufflers can open partially!
hey man how did u program the button with ur garage opener?
Just like programming your garage door opener. You press and hold buttons 1 and 3. The press the button you want to assign and the button on the valvetronic remote
@@EvanGoyuk thanks! i just installed a similar setup but with valved vacuum cut outs before the mufflers. So catless dp then these right before the stock mufflers. With the valves closed it sounds stock still as the stock mufflers are so restrictive, but once i open them... man its so loud and sounds amazing LOL. I would never be able to run a muffler delete and catless dp tho as the drone at 18-1900 rpms is horrific. Valved is def the way to go
I am nervous for how loud it is going to be with a catless DP and the valves shut
@@EvanGoyuk yeah im not sure how it would be with those mufflers u got now, but from the stock mufflers, you couldnt even tell i installed a dp. Just the cold start was loud for 15 seconds and wide open throttle was a bit louder. Other than that stock AF.
Would you be able to look at my recent video on my channel and maybe help me figure out what’s wrong with my e46? Thank you!
Sure
@@EvanGoyuk thank you! make sure your volumes up the noise is really high pitched