I have a Jura Impressa S8. Coffee and tea spout have worked constantly. I removed a hose from the steamer to unclog cuz my steam wand was not producing anything. After putting it back together, steam wand worked perfectly. When I went to de calcify, added the tablet and pushed the clean button, the entire process went through the steam wand! I reset to factory settings, re booted, and when I push rinse it again all goes through the steam wand. After "Coffee Ready" I pushed the coffee brew and the grinder activated but the water again came out the steam wand. My understanding is that if I leave it unplugged for 2 hours, the CPU will clear. Then I should get the "fill system" prompt. Right now I am only getting will water. If after the 2 hour wait is still does not channel the water to the coffee spout, I assume it is the fault of the water channeler that is behind the steam knob which has two line in's and 2 line outs. Before I did the repair and cleaning the coffee and tea spouts were functioning perfectly. Advice?
Two things - 1. Decalcify and Clean are two separate processes. Decalcify uses the tablet dissolved in the water tank and pushes water out the steam pipe during the first half of the cycle. Tablet cleaning uses the tablet in the ground coffee chute and passes no water out the steam pipe. 2. There's a magnetic solenoid valve that stays closed during rinse/brew to keep anything from coming out the steam pipe. If the solenoid is stuck open or there's debris in it, everything will come out that pipe and not through the dual coffee spouts (which sounds like your probelm here). This has nothing to do with the Reset, CPU, nor what's behind the hot water knob. Fortunately, the solenoid comes apart so you can fix it.
How to descale it?
I have a Jura Impressa S8. Coffee and tea spout have worked constantly. I removed a hose from the steamer to unclog cuz my steam wand was not producing anything. After putting it back together, steam wand worked perfectly. When I went to de calcify, added the tablet and pushed the clean button, the entire process went through the steam wand! I reset to factory settings, re booted, and when I push rinse it again all goes through the steam wand. After "Coffee Ready" I pushed the coffee brew and the grinder activated but the water again came out the steam wand. My understanding is that if I leave it unplugged for 2 hours, the CPU will clear. Then I should get the "fill system" prompt. Right now I am only getting will water. If after the 2 hour wait is still does not channel the water to the coffee spout, I assume it is the fault of the water channeler that is behind the steam knob which has two line in's and 2 line outs. Before I did the repair and cleaning the coffee and tea spouts were functioning perfectly. Advice?
Two things - 1. Decalcify and Clean are two separate processes. Decalcify uses the tablet dissolved in the water tank and pushes water out the steam pipe during the first half of the cycle. Tablet cleaning uses the tablet in the ground coffee chute and passes no water out the steam pipe. 2. There's a magnetic solenoid valve that stays closed during rinse/brew to keep anything from coming out the steam pipe. If the solenoid is stuck open or there's debris in it, everything will come out that pipe and not through the dual coffee spouts (which sounds like your probelm here). This has nothing to do with the Reset, CPU, nor what's behind the hot water knob. Fortunately, the solenoid comes apart so you can fix it.
@@superautopro We have the impressa S8 probablie 10/12 years old and it won't rinse I can't figure out why.
@@dianebarbara5922 Hi Diane - Does it do everything else like make coffee, steam? When you rinse can you hear the pump? Need more detail.
How do I get sevice
What is up with mine it's got no pressure can anyone help
Use the Contact Form at SuperautoPro.com and give as much detail as you can - we'll help you out.
Muy buena cafetera