Friends all a big hello. Received some negative comments for this video. Have you forgotten how to smile? Don't take this video seriously, it's just for fun. I made this lathe chuck and adapter for my milling machine. And I decided to show it to you in the version with a drill. Thank you all so much
Start of the vid: oohh that might be a way to jig up a home lathe withouth needing a lathe Video part way through: extensive use of a several thousand dollar machine lathe
The thing is, I didn't buy it. I made it myself for a specific lathe chuck. I think it will be easier for you to order one from someone in some kind of workshop. here's a 15 minute job.
Quel intérêt sinon de tuer la perceuse ??? On appelle ça la méthode "bourin" ou comment faire le travail d'une grosse perceuse avec une petite !!! Ou plutôt, comment tuer sa perceuse en deux minutes ??? Le pire, c'est qu'il est content de lui !!! Ca me rappelle un gars qui essayait de tirer un camion de 19 tonnes avec une 2CV Méhari !!! Est-ce utile de preciser que le camion n'a pas bougé et que le moteur et l'embrayage de la voiture sont morts !!! J'ai découvert cette chaîne il y a peu de temps, et j'avais trouvé les videos intéressantes. Mais là, c'est bon, j'ai compris ! Je vais voir ailleurs !!!
My dear friend, I understand that you may have some concerns or negative feelings about the content. If it's not too much trouble, I kindly ask you to read the description of the video. In the description, I have clearly expressed my attitude towards this project and requested all viewers not to take it too seriously, as it is intended for entertainment purposes. Sometimes, misunderstandings can occur, and I apologize if the intention of the project was not conveyed effectively. I appreciate your feedback and will strive to ensure that future content aligns better with your expectations. Thank you for your understanding.
@@serengytechtrop tard, je me suis déjà désabonné de votre chaîne ! Pourquoi, parce que vous êtes un menteur !!! Dans les commentaires, au moins deux personnes vous ont demandé où il pouvaient se procurer cet adaptateur. Leur avez-vous dit qu'ils allaient tuer leur perceuse ??? Bien sûr que non !!! Vous avez simplement conseillé de voir un tourneur pour le faire fabriquer !!! Donc, vous êtes un menteur qui se moque de ses abonnés !!! Voilà pourquoi je me suis désabonné !!! Et me dites pas que vous êtes désolé, ça ferait un mensonge de plus !
Tune in next week for the follow-up episodes entitled _"I Installed a Lathe Chuck on the Drill - _*_How to Change Worn-Out Bearings",_* _"I Installed a Lathe Chuck on the Drill - _*_How to Change a Burnt-Out Motor"_* and lastly _"I Installed a Lathe Chuck on the Drill - _*_How to Dispose of a Knackered Drill in an Environmentally-Friendly Way!"_* 😂 All this and more on the *_My MiniCrafts_* channel. 🤦 Hey, at least he's not using sanding discs stuck to CDs in a grinder! 🤔🙄
Hello my friend. You are a very creative person. You made a content plan for me for a whole month, thank you so much for that. Actually this video was made for entertainment purposes. I wrote about this in the description of the video, there will be time and desire to read.
That is a good modification, but something like between 2 and 3 inch. The antique drills would be incredible with this mod, and they have space for 3/4 threaded pipe mount which can be made to work in any vise as a very basic and perfectly functional wood lathe. Tools should be longest lasting, and useful, without being lousy in any of those areas. Just like a hand circular saw, they should all be 10 inch, and easy to put on plywood as a circular saw. The fence is just 2 clamps and a straight piece of milled wood. Its too easy when you have the right shit. Too much, much too much straight wrong ass shit.
![เป็นไปได้ไหม - WanMai [Performance Video]](http://i.ytimg.com/vi/Eh5hItD4Mr0/mqdefault.jpg)
Friends all a big hello. Received some negative comments for this video. Have you forgotten how to smile? Don't take this video seriously, it's just for fun. I made this lathe chuck and adapter for my milling machine. And I decided to show it to you in the version with a drill. Thank you all so much
I have a 4" chuck.....im gonna do this for the fun of it too!. Great job man!
Thank you friend.
Nice, more torque for drilling
Start of the vid: oohh that might be a way to jig up a home lathe withouth needing a lathe
Video part way through: extensive use of a several thousand dollar machine lathe
Thanks a lot. I think it can be adapted
they actualy sell lathe chuck that you can put in drill chuck
sadly it seems little smaller
So Good boss 👍👍😊😊
Thanks a lot
Eu queria colocar um desse na minha furadeira de bancada mais ficou top 👍👍👍👏
Thanks a lot
makita tough man version!!😘
Thank you friend.
Good job!!!👍
Thanks a lot
Berapa inch ukuran alat ini
80 mm.
@@serengytech dimana untuk membelinya?
Мощно!)
Чего мелочится. просто больше не нашлось патрона)
@@serengytech Ну то есть в теории там мог быть 450мм четырёх кулачковый патрон)
@@СергейХоффман-б7ц Это очень жестко. Бедная дрель.
Chuck for Mini Lathe Which is the best between K11 80 and K11 100
It depends on the size of the machine.
Merhaba Usta,
Biraz ağır oldu. Kısa süreliğine ahşapta etkili olabilir ama metal delemez zannedersem !!!🙂🙌
This video was made for entertainment purposes. I'm not going to work with this tool. It was an experiment. Now smile 😁😁😁
Que locaso! 😅😅😅
😁😁😁👍
Where to find this adaptor how can buy this adaptor please send buy link
The thing is, I didn't buy it. I made it myself for a specific lathe chuck. I think it will be easier for you to order one from someone in some kind of workshop. here's a 15 minute job.
Can I buy that adapter?
I'm afraid that this adaprad will not reach you. on adapter metric thread
Shoulda used a 4 jaw independent !! 🙄😂
Great idea. I don't have that. If it does, I'll be sure to install it.
T am from Bangladesh
Toooooop
Thank you
注意安全，保重身體
Thank you. Safety first
Хера ж себе маховик
😮😮😮
Thanks a lot
Quel intérêt sinon de tuer la perceuse ???
On appelle ça la méthode "bourin" ou comment faire le travail d'une grosse perceuse avec une petite !!! Ou plutôt, comment tuer sa perceuse en deux minutes ???
Le pire, c'est qu'il est content de lui !!!
Ca me rappelle un gars qui essayait de tirer un camion de 19 tonnes avec une 2CV Méhari !!!
Est-ce utile de preciser que le camion n'a pas bougé et que le moteur et l'embrayage de la voiture sont morts !!!
J'ai découvert cette chaîne il y a peu de temps, et j'avais trouvé les videos intéressantes.
Mais là, c'est bon, j'ai compris ! Je vais voir ailleurs !!!
My dear friend, I understand that you may have some concerns or negative feelings about the content. If it's not too much trouble, I kindly ask you to read the description of the video. In the description, I have clearly expressed my attitude towards this project and requested all viewers not to take it too seriously, as it is intended for entertainment purposes.
Sometimes, misunderstandings can occur, and I apologize if the intention of the project was not conveyed effectively. I appreciate your feedback and will strive to ensure that future content aligns better with your expectations. Thank you for your understanding.
@@serengytechtrop tard, je me suis déjà désabonné de votre chaîne !
Pourquoi, parce que vous êtes un menteur !!!
Dans les commentaires, au moins deux personnes vous ont demandé où il pouvaient se procurer cet adaptateur.
Leur avez-vous dit qu'ils allaient tuer leur perceuse ??? Bien sûr que non !!!
Vous avez simplement conseillé de voir un tourneur pour le faire fabriquer !!!
Donc, vous êtes un menteur qui se moque de ses abonnés !!!
Voilà pourquoi je me suis désabonné !!!
Et me dites pas que vous êtes désolé, ça ferait un mensonge de plus !
дрель жалко...
С дрелью все в порядке. Будем считать, что испытание прошла.
🤔😲😲😲😲
Thank you
Tune in next week for the follow-up episodes entitled _"I Installed a Lathe Chuck on the Drill - _*_How to Change Worn-Out Bearings",_* _"I Installed a Lathe Chuck on the Drill - _*_How to Change a Burnt-Out Motor"_* and lastly _"I Installed a Lathe Chuck on the Drill - _*_How to Dispose of a Knackered Drill in an Environmentally-Friendly Way!"_* 😂
All this and more on the *_My MiniCrafts_* channel. 🤦
Hey, at least he's not using sanding discs stuck to CDs in a grinder! 🤔🙄
Hello my friend. You are a very creative person. You made a content plan for me for a whole month, thank you so much for that. Actually this video was made for entertainment purposes. I wrote about this in the description of the video, there will be time and desire to read.
Plzzzzzz 😉😉🌷❤
That is a good modification, but something like between 2 and 3 inch. The antique drills would be incredible with this mod, and they have space for 3/4 threaded pipe mount which can be made to work in any vise as a very basic and perfectly functional wood lathe. Tools should be longest lasting, and useful, without being lousy in any of those areas.
Just like a hand circular saw, they should all be 10 inch, and easy to put on plywood as a circular saw. The fence is just 2 clamps and a straight piece of milled wood. Its too easy when you have the right shit. Too much, much too much straight wrong ass shit.
Thank you. I made this device for entertainment purposes.