This is such a great move from Deity. I know there have been standard brands for production and a lot of time people are mostly snob about new ones. However product like this are easier for people to try Deity product. Eventually they will open up to every product to your catalogue. Kudos! I'm really waiting for a new party to come in in an industry that there are only few players that are being trusted. I love it!
This seems very useful for a portable live broadcast station. Switcher, monitors and video transmitter. I would love to try it on my team. Congratulations for this innovation that I am sure will be of great help to the industry.
I was looking power system for my field recording kit and it ends here. Very good products. Lets see how these devices can handle the recording enviroments? Moisture... -20 celcius... etc...
Hi Andrew! Great product! How do you power the SPD-1 with the Ta4 input on Mixpre series ? Do we need a Ta4 to hirose cable when using the MX-HIROSE DC ? Thanks
Other way around. You need the MX-HIROSE adapter for your MixPre, and then you'd use the SPD-HRHR cable to link your MixPre to the SPD-1. Ideally you'd use Output #1 for your MixPre.
@@DeityMicrophones Okay for that but the SPD1 will be powered by the battery. Do we need exclusively the SPD-T4BATT for that? I only got NP1. I'll have to change my batteries I guess ?
Is there a certain AC to DC power supply with a TA4F connection that you all would recommend in order to provide house power to the SPD-1? Or is there a different method you all suggest?
@DeityMicrophones If I have two batteries plugged into the inputs will it Fully drain the A- battery and auto swap to the second B-Battery or will it constantly switch between the batteries until both are fully drained?
Yes!!!!! Can it power the DUO-RX units without a buzz? I have had issues with powerbanks on my 3.. to the point I have to charge the units on breaks and not in situ. AND.. if so, if I also get the HR3U (I think this is designed for use with your DUO-RX in this case).. Should that be on OP Group 1 or 2? I have a small soundbag (DOP not a soundo), so the only other thing to power is a Sound Devices MixPre6II.. Thanks
Glad you get it, cuz he ain’t talking to me 😳 not knowing even after watching this what exactly it does! , if it’s something I may need or want or grow into, 🤷♂️ I watch to expand my knowledge not just to give views 😳 😂
Hi Andrew, I have a AKG SST-4500 in ear monitor system that I use for FIB. That unit works on 12V. I normally use a camera battery plate and run a cable from the 12v output of the plate to power this unit. If I use the PTap cable to power the SPD-1 and get the HIROSE to 5mm cable to power that unit using a V Mount battery (getting rid of the plate) would the SPD-1 will send more than 12V. The output of the battery via P-Tap is 14.8V. Is there a way to set the SPD-1 to send 12V to a specific output? Or can I use it like that. Thanks in advance for information.
You'd need to use a cable that has an in line 12V regulator buck converter. Best bet would be to call Gotham Sound in NYC or Location Sound Corp in LA to see if they have anything like that.
Not bad Deity, you keep surprising us with your products!
We're like a ninja with our designs
Such a smart design
Sensational. I'm still riding the high from the Deity TC-SL1, and now this drops!! Too good!
We try 😅
This is such a great move from Deity. I know there have been standard brands for production and a lot of time people are mostly snob about new ones. However product like this are easier for people to try Deity product. Eventually they will open up to every product to your catalogue. Kudos! I'm really waiting for a new party to come in in an industry that there are only few players that are being trusted. I love it!
A great response to my community question!
This seems very useful for a portable live broadcast station. Switcher, monitors and video transmitter. I would love to try it on my team. Congratulations for this innovation that I am sure will be of great help to the industry.
Great product. I wouldn't have much use for this currently but nice to know something like this exists for when I upgrade.
Looks great, might pick one up in the future!
What isolation, regulation, protection the outputs have?
Thanks !
I was looking power system for my field recording kit and it ends here.
Very good products. Lets see how these devices can handle the recording enviroments?
Moisture... -20 celcius... etc...
Pretty dope that you can use USB-C if needed! Innovative!
Amazing!
Amazing.
I would really love a smaller version with 4 outputs! The current version would take a little bit too much room in my bag
Hi Andrew! Great product!
How do you power the SPD-1 with the Ta4 input on Mixpre series ? Do we need a Ta4 to hirose cable when using the MX-HIROSE DC ?
Thanks
Other way around. You need the MX-HIROSE adapter for your MixPre, and then you'd use the SPD-HRHR cable to link your MixPre to the SPD-1. Ideally you'd use Output #1 for your MixPre.
@@DeityMicrophones Okay for that but the SPD1 will be powered by the battery. Do we need exclusively the SPD-T4BATT for that? I only got NP1. I'll have to change my batteries I guess ?
Is there a certain AC to DC power supply with a TA4F connection that you all would recommend in order to provide house power to the SPD-1? Or is there a different method you all suggest?
Awsome!!! You should be doing smart batteries also!!!
Soon
@DeityMicrophones If I have two batteries plugged into the inputs will it Fully drain the A- battery and auto swap to the second B-Battery or will it constantly switch between the batteries until both are fully drained?
It will pull from the unit with the highest voltage till both batteries are equal and then draw from both
Can you plug in a USB-C power brick (Anker, Apple, etc..) in order to power the whole kit from mains power?
Yes. You need to make sure it supports PD3 and offers 12V3A as one of its USB-C power options.
Yes!!!!! Can it power the DUO-RX units without a buzz?
I have had issues with powerbanks on my 3.. to the point I have to charge the units on breaks and not in situ. AND.. if so, if I also get the HR3U (I think this is designed for use with your DUO-RX in this case)..
Should that be on OP Group 1 or 2?
I have a small soundbag (DOP not a soundo), so the only other thing to power is a Sound Devices MixPre6II.. Thanks
When it switches to usb-c is that seamless without the rig turning off for a second?
It is perfectly seamless. Your setup will never lose power.
Wait, can you use the SPD-1's USB-C plugged into a wall outlet to charge the smart battery?
Seems like a great system.
Is the SPD-HRDC 2 way?
Technically ya. That would work.
Looks really nice! Definitely pushing deeper into the pro film world (not as much for us little TH-camrs 😅).
Glad you get it, cuz he ain’t talking to me 😳 not knowing even after watching this what exactly it does! , if it’s something I may need or want or grow into, 🤷♂️ I watch to expand my knowledge not just to give views 😳 😂
Hi Andrew, I have a AKG SST-4500 in ear monitor system that I use for FIB. That unit works on 12V. I normally use a camera battery plate and run a cable from the 12v output of the plate to power this unit. If I use the PTap cable to power the SPD-1 and get the HIROSE to 5mm cable to power that unit using a V Mount battery (getting rid of the plate) would the SPD-1 will send more than 12V. The output of the battery via P-Tap is 14.8V. Is there a way to set the SPD-1 to send 12V to a specific output? Or can I use it like that. Thanks in advance for information.
You'd need to use a cable that has an in line 12V regulator buck converter. Best bet would be to call Gotham Sound in NYC or Location Sound Corp in LA to see if they have anything like that.
What connector will i need to connect to my Sound Devices Mix Pre3 II?
Probably going to want the Hirose battery sled from Sound Devices and a SPD-HRHR
www.amazon.com/dp/B089B5F19F?tag=mus0a-21
So it is a power distributor, indeed.
Wow, Wow and Wow!!!
Is Andrew from Deity, another Avatar of Santa Claus?
Is Christmas early this year?
😊