Very informative as usual. I do appreciate you taking the time showing the how to. Pointing out key points is what’s really needed in most cases. Thank you
Great video I'm rather new to the hobby been working on a layout for a little over a year now. I learn a lot from videos just like this. Can't wait for you to get back to the scratch build / kitbash.
I've installed a number of decoders over the years, some are pretty easy some are difficult. I never thought of doing a video on it, probably if I did I would screw it up 😅. Anyway, you had a lot of good tips for those who have never done one of these. 👍
@@johnlazar7582 thanks John. I always try to keep it simple for those who are new to the hobby. Oh and I forgot to talk about the headlights and what tabs they get soldered to.
He Rob Question? Do you have to isolate the Atlas Motor from the Frame of the engine Like you have to do with old Athearn Bluebox engines? Also I would clean the solder joints with Alcohol and a acid brush cut down to about 1/8th inch. Just so the that the residue is cleaned off of the Board. Thanks Kevin
Very informative as usual. I do appreciate you taking the time showing the how to. Pointing out key points is what’s really needed in most cases. Thank you
@@steveprice436 anytime Steve. Thanks for watching.
Great video I'm rather new to the hobby been working on a layout for a little over a year now. I learn a lot from videos just like this. Can't wait for you to get back to the scratch build / kitbash.
@@larryrogers5996 thanks for watching Larry. Most of my videos are aimed at people new to the hobby or those getting back into it.
I've installed a number of decoders over the years, some are pretty easy some are difficult. I never thought of doing a video on it, probably if I did I would screw it up 😅. Anyway, you had a lot of good tips for those who have never done one of these. 👍
@@johnlazar7582 thanks John. I always try to keep it simple for those who are new to the hobby. Oh and I forgot to talk about the headlights and what tabs they get soldered to.
You are very talented!
@@lottaaction8072 thank you. That means a lot to me.
Bruh...I thought you said easy/simple 😂😂...really appreciate you doing this video...will be trying it in the future...
@@georgiasunbelt just call. I can talk you through it.
@ don’t worry…will be calling…
Great video, lotsa h elp. Now, how about a video on an Atlas/Roco unit? Theres still a lot of them out there.
@@AMX86 that’s in the works. I have a couple here just waiting for me to stop being lazy.
He Rob Question? Do you have to isolate the Atlas Motor from the Frame of the engine Like you have to do with old Athearn Bluebox engines? Also I would clean the solder joints with Alcohol and a acid brush cut down to about 1/8th inch. Just so the that the residue is cleaned off of the Board. Thanks Kevin
@@kba3039 no you don’t have to isolate the motor, great idea to clean the board.
email didn't work
@@audietrexler157 hoscalemodeltrains2022@gmail.com