Incredible work! The best looking BVE NYCT route I've seen yet! I played the entire Livonia Yard-148 Street route and it's pretty accurate for the most part. The signals work properly overall, although going between 96 and 110 I encountered a couple of timers which turned from yellow to green with the next signal still red, which can't happen with NYCT signaling -- that signal can't go green until the following signal has turned yellow or green first. Also, home signal X60 just before 142 Junction must have a bottom yellow for a route to 148, while this sim has it as green over green. Also when I get a yellow over yellow at X104 north of 145, the iron on the diamond crossover is set for a straight route. Otherwise, some amazing work!
Thanks man!! Appreciate it!! After going over it I did notice those home signals were wonky in the areas you pointed out, and in the next update I’ll definitely get around to fixing it. Thanks for the feedback!
Hi, thx for the great work and im quite enjoy it, but openbve force me to open both side of the door when I arrive every station (the stop bar appear on both side of the screen and doesn't count that I've arrived if I only open one side of the door). How can I fix it? thx.
If you don't mind me asking, for the 1 Line, is WTC-Cortlandt in development. It's just such an interesting station that you and the development team could pull off.
Hi, i am having a strange problem with this route along with many others that I attempted to download. For some reason whenever I load a train into this and some other routes the entire route is gray, with the train being the only thing that loads, could you or anybody else reading this please help me, Thanks
Sure. In your main BVE folder there should be a folder labeled Object, Route, and Sound. Drag everything in the object folder (IRT 7th Ave, Eastern Parkways, etc) from the 3 line file into your object folder for BVE. Do the same for the routes and sounds as well. Hopefully this helps!
Also as some advice, to get rid of the white outlines in textures that show up in game, expand the image in paint.net and then put it back to the normal size
Where are the objects? There are no objects loaded into the game. Can you troubleshoot this? I am using the latest openBVE. Again, nothing loads. Just my train.
![[OPENBVE] WMATA REMODEL PREMIER](http://i.ytimg.com/vi/eIlBjhtvxTQ/mqdefault.jpg)
Awesome! Thanks for the great content, I love routes that start at the yard.
This is absolutely amazing route ever and you did good with it
Great job again! I hope next is (E) To Jamaica Center
Nice release. Just downloaded the route and played it. Im currently thinking about coding a few more scenarios.
Nice miles!
Good R62 (3) video!
This christmas just keeps getting better!
Thanks so much for this great OpenBVE Christmas gift. Merry Christmas and Happy Holidays 😊🎄
Very nice job, Miles!
Oh snap what a lit Christmas present dude! 👌
This is soo dope great job to the developer's another gem
Amazing job ! I’m loving it
New lots avenue looks awesome!
A quality release gift brought to you by the developers of Openbve (Including you most importantly!)
mah boi did it, but all honesty, I'm waiting for that 2, so I'm now on edge.
NO!
@@lemonjuuce682 what?
@@SublimeTransit the 3 is bomb nocap
@@lemonjuuce682 But I don't care about the 3.
@@SublimeTransit I'm just joking don't worry lol
Incredible work! The best looking BVE NYCT route I've seen yet!
I played the entire Livonia Yard-148 Street route and it's pretty accurate for the most part. The signals work properly overall, although going between 96 and 110 I encountered a couple of timers which turned from yellow to green with the next signal still red, which can't happen with NYCT signaling -- that signal can't go green until the following signal has turned yellow or green first. Also, home signal X60 just before 142 Junction must have a bottom yellow for a route to 148, while this sim has it as green over green. Also when I get a yellow over yellow at X104 north of 145, the iron on the diamond crossover is set for a straight route. Otherwise, some amazing work!
Thanks man!! Appreciate it!! After going over it I did notice those home signals were wonky in the areas you pointed out, and in the next update I’ll definitely get around to fixing it. Thanks for the feedback!
You should be the #1 youtuber
Patients is key Great job
Did yours come up as a black box
Treating this like a christmas present
ayeeeeeeeee! nice one, miles!
15:25 Damn, this station aged well, I hope it’s reopened soon.
WOOOOOOOOOOO - the action of a leech & bve foamer
Its a miracle!!
Hi, thx for the great work and im quite enjoy it, but openbve force me to open both side of the door when I arrive every station (the stop bar appear on both side of the screen and doesn't count that I've arrived if I only open one side of the door). How can I fix it? thx.
*HERE WE GO*
If you don't mind me asking, for the 1 Line, is WTC-Cortlandt in development. It's just such an interesting station that you and the development team could pull off.
All we need is your trains those are fire
FINALLY
Awesome!
Lets gooo!
Is there a r62 out and if so can I get a download link?
i really would like to try this out. im hearing really good things. however, im having problems with downloading
decryption key
The key should be in the description, if it doesn’t work I’ll reupload it
yess sir I'm about to be a buff with this 3
Nice!
Hi, i am having a strange problem with this route along with many others that I attempted to download. For some reason whenever I load a train into this and some other routes the entire route is gray, with the train being the only thing that loads, could you or anybody else reading this please help me, Thanks
Did you move the objects to their respective folders?
@@justin483211 no, but i honestly dont know how to do that, could you please tell me? Thanks
Sure. In your main BVE folder there should be a folder labeled Object, Route, and Sound. Drag everything in the object folder (IRT 7th Ave, Eastern Parkways, etc) from the 3 line file into your object folder for BVE. Do the same for the routes and sounds as well. Hopefully this helps!
@@justin483211 it worked!! Thank you very much for helping me, I really appreciate it!!
nice! Do you need objects for the route?
The route will include all the objects
Miles2696 it won’t load objects latest bve
Openbve
*spits out coke* My favorite route being released on christmas!? Can't be true! Hope you're enjoying the speedometer texture!!
Also as some advice, to get rid of the white outlines in textures that show up in game, expand the image in paint.net and then put it back to the normal size
help
Thanks!!!!
Where are the objects? There are no objects loaded into the game. Can you troubleshoot this? I am using the latest openBVE. Again, nothing loads. Just my train.
When i downloaded your file the route only goes northbound until crown heights utica avenue so i see no more stops after that why?
This is nice but I don't know if there is a train that goes with the line.
does the r62 come with the route?
What version of OpenBVE works with this?
why wont the objects load? like, none of them will
help
Are the objects in their respective folders?
@@justin483211 yes.
but i found out a while ago how to fix it
fixed a couple other routes aswell
Miles are you going to release trains or only routes
Eventually both, for now I’m releasing things that are done/close to done
Miles2696 oh ok and is this the last release of 2019 and forgive me if I sound leeche but I love your content
Haha, no worries! Most likely this will be the last release for the year. However much more is in store for 2020 so stay tuned!
it doesnt work for 1.7.10. well for me
I have a problem loading the route
it works on the new version of openbve 1.7.1.0
Please do a mbta red line train
DeCrpytion key?
can't get it to work though, i've installed everything. ;-;
Which BVE Version are you using?
@@justin483211 nevermind, i've gotten it to work, sorry.
Miles2696 I use 1.7.cantremember.6 latest version no objects load
Miles i have 1.4 and its not working theres no objects can you fix it?
Are you sure the objects are in their respective folders?
@@justin483211 I downloaded it along with the objects the order is 1.Objects 2. route 3.sound
Same but latest version
@@Watchmeloseit2012 you need 1.5.4.0
P_atchy I tried to install from main page but it had a virus
How do you get the 3 to Work
The file was 7z but I converted it to a zip file.
it does not work for me it just shows my train no tracks no signals no nothing
I can do a tutorial vid on how to download it want me to do that?
RBX gamer 15 sure thanks
1NV4L3D ok I will do the video later :)
Ok I uploaded the video
Does it include objects
Ok so I’m missing stations all stations north of sutter av
MTA New York City Transit Films and I’m missing EVERYTHING
Crashes before it finishes loading the map. 😔
Try using a different version of BVE
@@justin483211 what version do u use?
@@justin483211 Downloaded v1.4.3.1 and not only does your route work now... my framerates double/trippled !!!
Where u get ur version
@@justin483211 i use version 1.7.1.8 does it work smoothly there
I really feel bad for people with low end PC because of The Quality of the route probably will crash peoples computer
It’ll still run fairly decent for low end PCs.
I have an i3 core with no objects loading with openBVE 1.7.uh.6 latest
It just came up as a black screen
It won’t work as well with the new BVE so try and use an older version. Also make sure you placed the objects in the right places.
Miles2696 which version should I have
Try 1.4.3 or anything below 1.6
Miles2696 I’m using openbve v1.4.2.0
I recommend 1.5 or 1.4.3
Oof everyone got it but me
Help
oof