Good video. I had my 2600 delivered. They should secure the box better, ie: nylon banding, mine was out of the box from fedex guy pieces laying in drive way. I started assembly, and your right bad assembly instructions, all components need to be labled. I laid out screw holes on tracking bars and predrilled, held in place to drill through sled, not to bad by yourself. Also, I am not sure about screw locations, but I made sure all my screws were on the side or underneath the bars as not to contact the skin/fabric, that should emphasized in instructions. I will attempt skin installation today.
Very entertaining! Thank you for sharing!! How’s the flipover doing? Since having the 2600, have you had any issues with the pole locking mechanisms sliding in or any issues with the flipover at all? Anything you’d change/improve?
No issues with it at all with any of the locking or sliding mechanisms. Well if ice gets in the pins they stick but only happen once. That’s only because melt and freeze again, as mine stays on my trailer outside. They only change/improve is the crap bolt/rivet in the seats. I had one seat break last year but I have left it out.
Just got my 2600 this season 2022. After watching your video!! I'm going to have a couple of friends come over and help me put it together!!!! Wouldn't think it would be that much of a pain in the arse!! Thanks for the video!! Now I have a good idea what I'm in for!!! LOL
Oh my lord…Glad I wasn’t the only one…The struggle was real! It’s a heck of a shack though…lots of people commented on it last season. Hope you got to enjoy it. Sgt. Outdoor has two awesome vids on how he tricked it out and a year review.
If someone finds this comment, I used a bunch of binder clips (any stationery store) and squeeze clamps to get the skin in place when attaching the stripping at the back. If you get that part right the shack works so much better overall. The thing that confuses me still is they tell you to take the entire skin off when storing it for the summer. But… I screwed the skin to the tub? 🤨
That’s a awesome idea I never thought of that. Thanks for the info on this nightmare of a spot🤙 With the skin I’m leaving mine on lol. I thought the same thing
Maybe I will next year. I feel they are just about the same, it’s just what color scheme you like more. Many have told me to look at getting clam next. I see they make a much lighter version with tons of room now. That’s what I’m looking for to get in and out of the truck and drag around.
Sorry to tell you but they are not even close to being the same the color has nothing to do with it, It's all about the material they use, Insulation, stitching, fabric, poll design, and Warranty. I can speak from experience clam's customer service and warranty department is top notch best in the industry, they stand by there products.
Just got my 2600 The Assembly Is a true nightmare if you are not a handy person I would recommend paying somebody to do it, I do want to punch the engineers in the face.
Bringing humor to fishing I love it! Subscribed! Hoping to get the 2600 for this coming season!
Thanks for watching and welcome to the channel! Hopefully we get some good ice this year lol the last two year have sucked for me.
@@Fillet_Release we are in the same boat! Two years is long enough I hope the anti winter people enjoyed it now let’s bring real winters back!
@@207ice2woods lol I’m one of them myself but if I can’t fish open water I want nice ice.
Love the 2600 only problem is no numbers on metal frame bars
Lol I watched your video to try and do the weatherstripping
Yeah it’s tough and the time lapse was my only option. Did you get it on? I thought about taking mine off and try to do a video on just that
@@Fillet_Release I haven’t yet. Life got in the way today. But I have some sort of idea now.
Good video. I had my 2600 delivered. They should secure the box better, ie: nylon banding, mine was out of the box from fedex guy pieces laying in drive way. I started assembly, and your right bad assembly instructions, all components need to be labled. I laid out screw holes on tracking bars and predrilled, held in place to drill through sled, not to bad by yourself. Also, I am not sure about screw locations, but I made sure all my screws were on the side or underneath the bars as not to contact the skin/fabric, that should emphasized in instructions. I will attempt skin installation today.
Just bought the 2600. Putting it together next weekend...wish me luck and thanks for the video!😊
Thanks..only video I saw putting the back edge trim on..I have the Sierra so a little different...but I found it to suck too... 😂
Very entertaining! Thank you for sharing!! How’s the flipover doing? Since having the 2600, have you had any issues with the pole locking mechanisms sliding in or any issues with the flipover at all? Anything you’d change/improve?
No issues with it at all with any of the locking or sliding mechanisms. Well if ice gets in the pins they stick but only happen once. That’s only because melt and freeze again, as mine stays on my trailer outside. They only change/improve is the crap bolt/rivet in the seats. I had one seat break last year but I have left it out.
You turned off the heater because it was getting cold in there lol 🤣. Thanks for the demo, very informative
I'm here cause of the trim
That trim is was weird to put on lol. I’m thinking I need to do a video on just that. That’s a problem I’m seeing a lot of people are having
Yes a video on the rubber trim
For the chair assembly, is the front black piece supposed to be flush with the sled? I can't seem to figure it out on mine as it doesn't sit flush.
Mine hangs over a little bit. I think it’s for flexibility when pulling it loaded.
i had to do same thing with my 2400 nothing labled missing couple bolts but in the end i like it compared to my old one
I’m thinking of the 2400 now for the weight for early ice.
Just got my 2600 this season 2022. After watching your video!! I'm going to have a couple of friends come over and help me put it together!!!! Wouldn't think it would be that much of a pain in the arse!! Thanks for the video!! Now I have a good idea what I'm in for!!! LOL
Yeah it should go a lot easier lol. I’m going to try and get a short video out just for the trim this weekend. A lot of questions about that part lol.
Just got the 2800.. great video.
Nice 👍 I’m super happy with the 2600. I don’t have a quad now, I will be pulling it around now with my BMW ( Basic Method of Walking ) lol
Oh my lord…Glad I wasn’t the only one…The struggle was real! It’s a heck of a shack though…lots of people commented on it last season. Hope you got to enjoy it. Sgt. Outdoor has two awesome vids on how he tricked it out and a year review.
I hate those rubber trim pieces to get it pinched in there
Yeah that is my least favorite part. I didn’t take the skin off because I didn’t won’t to mess with it again lol!!
If someone finds this comment, I used a bunch of binder clips (any stationery store) and squeeze clamps to get the skin in place when attaching the stripping at the back. If you get that part right the shack works so much better overall.
The thing that confuses me still is they tell you to take the entire skin off when storing it for the summer. But… I screwed the skin to the tub? 🤨
That’s a awesome idea I never thought of that. Thanks for the info on this nightmare of a spot🤙
With the skin I’m leaving mine on lol. I thought the same thing
Did you use clips and not the rubber? Or both
Should have got a clam
Maybe I will next year. I feel they are just about the same, it’s just what color scheme you like more. Many have told me to look at getting clam next. I see they make a much lighter version with tons of room now. That’s what I’m looking for to get in and out of the truck and drag around.
Sorry to tell you but they are not even close to being the same the color has nothing to do with it, It's all about the material they use, Insulation, stitching, fabric, poll design, and Warranty. I can speak from experience clam's customer service and warranty department is top notch best in the industry, they stand by there products.
the clam flip over is basically the same (nanook) my son has that
@@shaunsmuder1637 I just mean the same as putting together
Clam seems cheaply built these days.
Just got my 2600 The Assembly Is a true nightmare if you are not a handy person I would recommend paying somebody to do it, I do want to punch the engineers in the face.
Hahaha you are not wrong about the engineers! Outside of the nightmare putting it together how have you like it?