Hello, I have read your project and am working on it. I installed it according to the diagram and loaded the code you gave me, but the left rear wheel can only move forward and right. I can't adjust it backwards and left
These durable (but affordable!) plastic gearbox motors (also known as 'TT' motors) are an easy, low-cost way to get your projects moving. This is a TT DC Gearbox Motor with a gear ratio of 1:48, and it comes with 2 x 200mm wires with breadboard-friendly 0.1" male connectors. Perfect for plugging into a breadboard or terminal blocks. You can power these motors with 3VDC up to 6VDC, they'll of course go a little faster at the higher voltages. We grabbed one motor and found these stats when running it from a bench-top supply At 3VDC we measured 150mA @ 120 RPM no-load, and 1.1 Amps when stalled. At 4.5VDC we measured 155mA @ 185 RPM no-load, and 1.2 Amps when stalled At 6VDC we measured 160mA @ 250 RPM no-load, and 1.5 Amps when stalled. Note that these are very basic motors, and have no built-in encoders, speed control or positional feedback. Voltage goes in, rotation goes out! There will be variation from motor to motor, so a separate feedback system is required if you need precision movement.
Hello, how about I would like to know how I could make the same robot but changing your L298N H bridges for some BTS7960 and how I could connect them with the same arduino code or what would I have to do
there is no way that the bts7960 module can be used is that the prototype that I am trying to make uses larger motors and burns the L298N H-bridges, so I wanted to know if there is no way to connect them to the module and if the module would also have to be modified arduino code
@@RobotLk ok I understand but how would it have to be connected, because I assumed that 4 bts7960 modules would have to be used, because this module is only for one motor but in what way would I have to connect it to the arduino and the motors so that they work correctly the mecanum rims
this is good! great channel!
🙂thanks
Felicitaciones por su proyecto. lo hice y me funciono perfectamente
Thank 😃
නියමයි 😍🙂☺️😙👍
Giveaway එකක් වගේ කරන්නකෝ
U're a legend bro 🥺🥺
Thnks bro ❤️👌👌
👍❤️
Hello, I have read your project and am working on it. I installed it according to the diagram and loaded the code you gave me, but the left rear wheel can only move forward and right. I can't adjust it backwards and left
Have you properly positioned the wheels direction while fitting it?
Can I use the AT - 09 module instead of the HC - 05. Will the app work for this module too or should I configure anything?
AT-09 I have not used before.
Maru wade hode මල්ලි
👍🙂
Good project 23:35
App download link - drive.google.com/file/d/19av_7nMOK3M8V3ip91Xtsa8PL9yyxsX0/view
L293D moter drvers ekkim hadanna puluvan neda awlk nhene😁
Ekakin haduwoth special mode , normal mod deken ekayi puluwan
@@RobotLk Mecanum Wheel vala price ehema kohomada ....shops vala hoyagannath amarui wheel 4m vage kiyak venavad😉
Mn gaththe 2500i
Mn link dala athi.alixprass eke
Wah bhai wah mja agye
निश्चित रूप से😁👍
Why do I connect and it does not work🥹🥹??
hi can i use L293D motor driver sheild instead of L298N motor?
L293d cannot be used.
Why ?
Can esp32 camera be attached to this diagram?
ai me eka video ekakawath voice ekak natte......katha karana gaman assemble karanm supiri.........voice nathikama loku madi kamak...prashna wedi ena baladdi...next eke idala puluwannam eka add karanna
Aniwaryen ,mn voice ekka video hadannam,meke prashna thiyenawanam whatssapp ekata message ekak danna 0771489786
Niyami
How to make the dc jack 😢, and please tell How to buy it
Dc jack red wire (+) Dc jack black wire (-)
Arduino VIN Arduino GND
12v IN motor GND Motor
Drive 1 drive 1
12v IN Motor GND motor
Drive2 drive 2
This is common knowledge. Learn how to make a basic electric circuit first
What is the max speed of this car
5 to 10 kmh
I did the same as in video but it doesn't work for sideways. Do you know why?
The video has the wheels incorrectly oriented. You want the rollers to form an "X" when viewed from above.
@@ddegn My school project has finished one month ago and YOU ARE CORRECT! It has to be an "X”. Thank you btw.
Fantastic project. Do you have the sketch for PS2 controller? Thanks!!
Good idea. I will make a video
@@RobotLk Great!!! thanks!!
what is rpm and torque of motor
These durable (but affordable!) plastic gearbox motors (also known as 'TT' motors) are an easy, low-cost way to get your projects moving. This is a TT DC Gearbox Motor with a gear ratio of 1:48, and it comes with 2 x 200mm wires with breadboard-friendly 0.1" male connectors. Perfect for plugging into a breadboard or terminal blocks.
You can power these motors with 3VDC up to 6VDC, they'll of course go a little faster at the higher voltages. We grabbed one motor and found these stats when running it from a bench-top supply
At 3VDC we measured 150mA @ 120 RPM no-load, and 1.1 Amps when stalled.
At 4.5VDC we measured 155mA @ 185 RPM no-load, and 1.2 Amps when stalled
At 6VDC we measured 160mA @ 250 RPM no-load, and 1.5 Amps when stalled.
Note that these are very basic motors, and have no built-in encoders, speed control or positional feedback. Voltage goes in, rotation goes out! There will be variation from motor to motor, so a separate feedback system is required if you need precision movement.
Infinity Retinal Intelligent System එකක් හදන හැටිගැන වීඩියෝ එකක් දානවද
E wage ekak hadannam amaruyi.mulin e gena wisthara tikak hiyaganna one.
👍👍👍
👍
Wow. Nice
Why there using 2 moter drivers
If a motor drive is used, only one of the special mode or normal mode will work
Eka motor drive ekakin normal yawanna hadanna puluwan ,naththam special mode witharayi.motor drive 2 dammahama dekama puluwan .e mode 2 wenasa video eke penwanawa
Super ayiye
Hello, how about I would like to know how I could make the same robot but changing your L298N H bridges for some BTS7960 and how I could connect them with the same arduino code or what would I have to do
BTS7960 This doesn't work
there is no way that the bts7960 module can be used is that the prototype that I am trying to make uses larger motors and burns the L298N H-bridges, so I wanted to know if there is no way to connect them to the module and if the module would also have to be modified arduino code
Maybe it can be made by applying module 4. I will send a message if possible
Viewed the btS7960 pdf. It can be made using 4 types. No need to change the code
@@RobotLk ok I understand but how would it have to be connected, because I assumed that 4 bts7960 modules would have to be used, because this module is only for one motor but in what way would I have to connect it to the arduino and the motors so that they work correctly the mecanum rims
the website has a host error
It was fixed. 👍
👍❤️
☺🙂
Are you sure that it will work 100persent correctly
💯 working hai maine banaya
Yes. Definitely work
How to make it controlled from anywhere in the world... Lije using gps
Let's look ahead. I still don't know much about big things. I'm still looking for new things. Oya lankawe ekkenekne.
Bang adakah gambar rangkaiyanya bang
❤️❤️
❤️🙂
meka harawrnne kohomada
Eka roda wala thiyenne.oya kalupata kali nikan karakawenawa.eka nisa ehema yanne.mecanum wheels kiyala kiyanne.google karala balanna.wisthara hoyaganna puluwan
Nice Bro
where Arduino Code ????
robotlk.com/how-to-make-arduino-mecanum-wheels-robot-car/
BRO PLZ GIVE ME A DIAGRAM SO PLZ
drive.google.com/file/d/1vgeBori_dF0MFT4g_PFq5EHGEXpiqKbf/view
Download code
robotlk.com/how-to-make-arduino-mecanum-wheels-robot-car/
👍👍