I have the NB4+ with the FGr4S receiver. I can't seem to get power to the motor cooling fan. What do I need to program to get power to the chanel I have the fan plugged into?
Nothing all the + and - pins are live all the time, I'd check you have the fan connected to the correct pins and the correct way round also check that the fan is rated for the correct 6 to 9v
Would this application apply to setting a light switch on to channel 3 on any of the Flysky receivers. I brought a switch but can't figure how to assigned a button on the Noble Pro.
Between the plus and the pro are you able to see more sensor data in one screen are they both the same? I'm trying to find out what the differences are between the pro and the Plus
I got your message yesterday, why I notice I don’t have Aux app on the noble Pro transmitter. So just figured out how to assign a channel to the light switch. I connected to channel 3 on the receiver but just can’t do it , assigning channel
Hello again I have a question about the old version vs new version of sensors? Is there any benefits to buy the more expensive new version vs using old style sensors since that's what I'm used to? I have the NB4+ TX & FS 4Gr8b Rx in both my buggies
The new sensors have more data fields in some of them and are ibus 2 meaning you can use the ibus 2 breakout board with 7 ports they are also faster due to higher bandwidth of ibus 2 that said if the old sensors work fine for you there is no issues using them :)
@WTFRCCars cool thanks for the info. I'm building a Arrma Typhon 6s TLR and I used the older sensors on my Typhon 3s so I was just debating whether or not to try new temp sensor?
I’m not sure what you mean by a 2 position switch, but I try and still can’t figure it out . I’m wondering if I have to download the latest firmware on the transmitter, but what I understand the latest is 1.0.5 unless you something different. I truly appreciate your response, your videos are amazing and very helpful, thanks WTC 👍
I have the NB4+ with the FGr4S receiver. I can't seem to get power to the motor cooling fan. What do I need to program to get power to the chanel I have the fan plugged into?
Nothing all the + and - pins are live all the time, I'd check you have the fan connected to the correct pins and the correct way round also check that the fan is rated for the correct 6 to 9v
Would this application apply to setting a light switch on to channel 3 on any of the Flysky receivers. I brought a switch but can't figure how to assigned a button on the Noble Pro.
No for the led switch you just assign a button to a channel and connect the led switch to that channel
Between the plus and the pro are you able to see more sensor data in one screen are they both the same? I'm trying to find out what the differences are between the pro and the Plus
I have a whole playlist for the pro but yes you have more options in the pro on how to display data for the sensors
I got your message yesterday, why I notice I don’t have Aux app on the noble Pro transmitter. So just figured out how to assign a channel to the light switch. I connected to channel 3 on the receiver but just can’t do it , assigning channel
Goto assign and set ch3 to a 2 position switch and and see if the light works when you press the button you have it set to.
Hello again I have a question about the old version vs new version of sensors? Is there any benefits to buy the more expensive new version vs using old style sensors since that's what I'm used to? I have the NB4+ TX & FS 4Gr8b Rx in both my buggies
The new sensors have more data fields in some of them and are ibus 2 meaning you can use the ibus 2 breakout board with 7 ports they are also faster due to higher bandwidth of ibus 2 that said if the old sensors work fine for you there is no issues using them :)
@WTFRCCars cool thanks for the info. I'm building a Arrma Typhon 6s TLR and I used the older sensors on my Typhon 3s so I was just debating whether or not to try new temp sensor?
@nathancunningham8717 they work well but don't daisy chain like the old sensors
@WTFRCCars didn't know that I haven't really checked into them too much. May just stick with older version just running temp, rotation & voltage
I’m not sure what you mean by a 2 position switch, but I try and still can’t figure it out . I’m wondering if I have to download the latest firmware on the transmitter, but what I understand the latest is 1.0.5 unless you something different. I truly appreciate your response, your videos are amazing and very helpful, thanks WTC 👍
Yeh 1.0.5 is the latest firmware, and when you assign a button it has the option of what kind of switch you want 2 position or 3 position