из такой заготовки можно было сделать два ножа- на ручку дамаск не нужен, можно было обычной железкой обойтись. закалка кривая- больше всего нагрелся цент клинка , а не края, хотя должно быть наоборот, отпуск не сделал - кромка будет крошиться. рукоять конечно на любителя, но как по мне - колхоз, такое красивое дерево в некрасивом исполнении.
المادة التي أضعها على الحديد المتجمر تُسمى **البوراکس** (Borax). ### فائدتها: - تعمل كـ **مساعد صهر** (Flux) أثناء عملية الحدادة. - تمنع **الأكسدة** التي قد تحدث على سطح المعدن عند درجات الحرارة العالية. - تُساعد في **تنظيف المعدن** وإزالة الشوائب. - تُحسن من جودة اللحام بين طبقات المعدن في حالة تصنيع الفولاذ الدمشقي. شكرًا لسؤالك! إذا كنت بحاجة إلى مزيد من التفاصيل، فلا تتردد في السؤال. 😊🔨
Sadık usta çok yahşi bir bıçak ürettin. Ama dövüş esnasında bıçağın balçağı olmadığı için alttaki sakalı kullananın parmaklarına zarar verebilir. Bu tip mücadele aletleri her daim balçaklı olmalıdır, bunu bir ürün tasarımcısı olarak söylüyorum..
Teşekkür ederim, güzel yorumlarınız ve öneriniz için! 😊 Balçak konusunda haklısınız, özellikle dövüş bıçaklarında kullanıcının güvenliği açısından önemli bir detay. Gelecek projelerde bu tasarım önerisini kesinlikle göz önünde bulunduracağım. Değerli geri bildiriminiz için tekrar teşekkür ederim! 🔨🔪
Thank you for the suggestion! Using powdered 1085 is definitely a great idea for reducing voids and improving the overall quality. I appreciate your feedback and will consider it for future projects. Thanks for watching! 😊🔨🔪
I really like this guy. No talking, just doing. The knife is not an item of beauty but it is a beautifully hand crafted by someone who does this all the time. This knife is super strong and is made for duty, not beauty and not to be hung on a wall. You sir are the best and I congradulate you on the knife and the other knives I have seen youj make. Your video is truly sinplistic and done in a masterful way. Thank you for what you make. I'd buy a knife anytime from you.
Thank you so much for your kind words and support! 😊 I truly appreciate your understanding of the effort and craftsmanship that goes into my work. You’ve perfectly captured the essence of what I strive for-functional, durable knives made with care and dedication. Your encouragement means a lot, and I’m glad you enjoy the videos. Hopefully, I’ll be able to make my knives available to more people in the future. Thanks again for watching and for your wonderful feedback! 🔨🔪✨
Très bon travail mais il manque quelques détails : protection du trançeneuse. Gants de protection. Lunettes de protection pour éviter les projections particulier.
Thank you! 😊 Absolutely, working with that tough steel is always a challenge, but it makes for a durable and reliable blade. Appreciate your support! 🔨🔪✨
Genio!! Me fascina su trabajo y quisiera hacer un cuchillo a su manera. Gracias por mostrar su manera de trabajar y de forjar sus ideas, a mí me fascinan y no tengo la palabra ideal que lo califique o describa a lo que lo yo admiro su trabajo. Saludos de Argentina. Espero consejos para iniciar o realizar mi primer cuchillo. Gracias genio!!!
¡Muchas gracias por tus palabras tan amables! 😊 Me alegra saber que te inspiran mis trabajos. Para tu primer cuchillo, te recomiendo empezar con acero reciclado, como una lima vieja o un resorte, y herramientas básicas como una lima y un esmeril. La paciencia y la práctica son clave. ¡Saludos hasta Argentina y mucha suerte en tu primera creación! 🔨🔪✨
Haha, it’s true! 😄 I really appreciate how much people care, though. It shows how supportive this community is. And don’t worry, I’m taking their advice and prioritizing safety more and more! 👓🔨😊
I often think the same damn thing. He's a grown ass man choosing not to wear glasses. I'm positive he knows all the risks associated with that but it's his choice to make. These comment karens can just stfu. Always worried about everyone's else's business but their own.
Дамасская сталь - это удивительный материал, который создаётся путём многократной ковки и сварки разных видов стали. Обычно берутся два типа стали: одна с высоким содержанием углерода (твёрдая и хрупкая) и другая с низким (гибкая и прочная). Эти слои чередуются, многократно складываются и проковываются, создавая характерный узор на поверхности. Процесс происходит именно ковкой, а не литьём. Каждый слой добавляет уникальный узор и свойства металлу: он становится прочным, острым и в то же время гибким. Дамасская сталь славится своей красотой и практичностью. Спасибо за интерес к теме! 🔨😊
I've commented on alot of his videos about that but he doesn't take precautions on the safety of his eyes, he commented and said he doesn't use them but I've never seen him use them and I've watched several of his videos
Merhaba! Döktüğüm beyaz tozun adı **boraks**. 😊 ### İşlevi: - **Akı (flux)** olarak kullanılır. - Yüksek sıcaklıkta metal yüzeyinde oluşabilecek **oksitlenmeyi önler**. - Metali **temizler** ve saflığını artırır. - Özellikle **damascus çeliği** gibi katmanlı çeliklerin birleştirilmesinde daha güçlü bir kaynak oluşmasını sağlar. Sorunuz için teşekkür ederim! Daha fazla bilgi isterseniz memnuniyetle paylaşırım. 🔨😊
You’re absolutely right-safety glasses are a must, and I’m making sure to wear them consistently now. 😊 As for selling my creations, I currently can’t sell outside my country, but I’m working on making that possible in the future. Stay tuned, and thank you for your support! 🔪✨
Danke für den Hinweis! 😊 Du hast absolut recht, Sicherheit sollte immer an erster Stelle stehen. Ich werde sicherstellen, dass ich in Zukunft konsequent eine Schutzbrille trage - Ersatzaugen habe ich nämlich leider keine! Danke, dass du dir Sorgen machst! 👓🔨
Thank you so much! 😊 I don’t currently make my own charcoal, but it’s definitely something I’ve considered trying in the future. I usually use pre-made charcoal for convenience. Thanks for watching and for the great question! 🔥🔨
DANG!!! I wish you had some nickel powder, or some other steel powder that you could have filled each disc's holes with before you welded them all together.... that way each hole would have a good chance of staying more circular while forging and then when you ground the knife down you would see remnants of the circles.... - Ahh well.... there is always next time, right? - I think that is a purchase you should make, and it would open up a lot of new ideas for you... but I have no idea which metal powder would be the best one for you.. I have no idea what the differences are... and that's why I'm WATCHING the video about KNIFE MAKING and not CREATING THE VIDEO about knife making - YOU are the MASTER/PROFESSIONAL (and a really good one too :D )
This Blade Wheel Keel.......Totally functional......and fingers, hands, arms and necks are merely inconveniences....Just saying. Whack a mole just entered the Twilight Zone.....
Not everyone is the same. Some have powers that can protect themselves. You can see in real life example on TH-cam "Carok Hasan vs Mat Tanjar" duel between 2 vs 10 people using "celurit" traditional knife. 2 people win, 4 out of 10 die. These 2 people have the power to not be hurt by sharp weapons. Another example is that there are people who can fry food using their hands directly dipped in hot oil without getting hurt. I hope Master knives also has spesial power to protect himself for getting hurt. But still using safety stuff is more better to give good example for all people.
Thank you for sharing these fascinating stories and examples! It’s amazing to hear about such unique abilities and strengths. While I may not have any special powers, I truly appreciate your thoughtful wishes for my safety. 😊 You’re absolutely right-using proper safety gear is not just about protecting oneself but also setting a good example for others. I’ll definitely work on being more consistent with safety precautions in my videos. Thanks again for your support and kind words! 🔨👓✨
Grazie mille per il tuo interesse, Vladimiro! 😊 Al momento, non posso vendere i miei coltelli al di fuori del mio paese, ma sto lavorando per rendere possibile la vendita internazionale in futuro. Ti terrò aggiornato!
Мастер просто молодец, не смотря ни на что!!! Сварить решётки от мясорубки, с листовым металлолом - нормально! Но на болгарке нет защиты...... Очков тоже нет.... Видать как у кота 9 жизней..... Ну и 2 глаза роскошь....... Элементарная безопасность, сказки для детей. Всё, умолкаю.
I noticed this as well. He should have filled the holes in the plates with powdered metal, and welded on the solid plates as he filled each ring. Then, when he drew out his billet, he should have oriented these holes so the they would appear on each side of the knife (instead of the way he did, which was vertically from blade to spine). Is it was, the holes were simply sealed shut when the billet was formed, so there was nothing there to create any sort of contrast. He may as well have used solid pieces. The only contrast was from the thinner plates he used, and with nothing but a straight forging and a single set of folds, this design was never going to be anything more then a small handful of of thin slightly wavy stripes.
When you are CUTTING with the ANGLE GRINDER, DO NOT PUSH DOWN HARD TO CUT FASTER! This ONLY destroys the disc faster! I've seen two different video of people testing if it is better to push down hard on the cut or let it use it's own weight or GENTLY PUSH DOWN and BOTH VIDEOS SHOWED THAT GENTLY PUSHING IS THE BEST WAY :) The only thing you are doing is cutting a LITTLE BIT FASTER but at the cost of DESTROYING THE CUTTING DISC - And when you cutting into quarters after the first forge/drawing out, it sure looks like you are PUSHING VERY HARD.... Yes it seems like this is VERY HARD TOOL STEEL, but you SURELY CAN eat through 2 cutting disc with those few cuts - - - You can test this for yourself with 2 new cutting discs... using the same piece of steel that is the same size for each cut just make two cuts punishing down hard and then 2 cuts gently pushing.... the 'pushing hard' cuts will be a little but faster but you will surely see how much more of the cutting disc is GONE! :) (If you weren't pushing hard at all, and that amount of sparks is just from the steel then I AM VERY SORRY and I did not intend to insult your skill or knowledge... I only wanted to help if I could :) )
Thank you so much for the detailed explanation and thoughtful advice! 😊 You’re absolutely right about the impact of pushing too hard on the angle grinder-it does wear down the cutting disc much faster. I appreciate you sharing your knowledge and the results of those tests. In some cases, the sparks might just be from the type of steel, but I’ll definitely pay more attention to my technique to ensure I’m not overloading the disc unnecessarily. Your suggestion to test both methods is a great idea-I’ll give it a try and see the difference for myself. No offense taken at all! I truly value input like this-it helps me improve my work and processes. Thanks again for taking the time to share this! 🔨😊✨
Thank you, brother! You’re absolutely right-protecting my eyes is so important. I’ll make sure to be more consistent with wearing safety glasses. Appreciate you looking out for me! 👓🔨😊
Howdy! 🤠 Thank you so much for the kind words! I’m thrilled you enjoyed the transformation. I’ll definitely keep pounding, and it means a lot knowing you’ll keep watching. Thanks for the support! 🔨🔪✨
Молодец мужик. Ты все делаешь круто, но итог получается у тебя какое то безвкусие какое то некрасивое что то. Можно же ради столько трудов сделать красивый нож с красивой рукояткой и гардой.
Спасибо за честный отзыв! Очень ценю конструктивную критику. Вы правы, уделять больше внимания эстетике - хорошая идея. Постараюсь в будущих проектах работать над дизайном, чтобы ножи выглядели не только функциональными, но и элегантными. Спасибо за мотивацию к развитию! 😊🔨🔪
Клинок куется, а не выпиливается болгаркой. И режущую кромку нужно отковать. Тогда твёрдость кромки режущей. Это обычный тесак из магазина. Испорчена хорошая заготовка.
Other knife makers: "...and now we need to fill the gaps with steel powder to remove the air from the billet and prevent cracks while forge-welding..." This guy: casually forge-welds parts of an 1980s era meat ginder face/shield/sieve/screen (whatever it's named) with holes in it, not caring about any leftover air inside... and succeeds... At this point you're just putting others to shame. 😂
из такой заготовки можно было сделать два ножа- на ручку дамаск не нужен, можно было обычной железкой обойтись. закалка кривая- больше всего нагрелся цент клинка , а не края, хотя должно быть наоборот, отпуск не сделал - кромка будет крошиться. рукоять конечно на любителя, но как по мне - колхоз, такое красивое дерево в некрасивом исполнении.
там ничему крошится весь углерод который там был он выжег
Gonna be a Master with 1 eye!
Someone needs to give him some safety glasses! sparks everywhere .... Nice end result.
Рисунок дамасска не получился, щели в накладках огромные...
это называется возможности огромные - реализация ноль.
Safety squints 💪
That's right who needs safety glasses when you have safety squints?!
Ого, вы очень мощно работаете кувалдой, большая сила 💪💪💪
ما أسم المادة او المسحوق التي ترشها او تضعها على الحديد المتجمر
وما فائدتها رجاءً .
المادة التي أضعها على الحديد المتجمر تُسمى **البوراکس** (Borax).
### فائدتها:
- تعمل كـ **مساعد صهر** (Flux) أثناء عملية الحدادة.
- تمنع **الأكسدة** التي قد تحدث على سطح المعدن عند درجات الحرارة العالية.
- تُساعد في **تنظيف المعدن** وإزالة الشوائب.
- تُحسن من جودة اللحام بين طبقات المعدن في حالة تصنيع الفولاذ الدمشقي.
شكرًا لسؤالك! إذا كنت بحاجة إلى مزيد من التفاصيل، فلا تتردد في السؤال. 😊🔨
this knife is very beautiful
Послушай Мастер , Ты почему без защитных очков работаешь ? Одна искра и писец на всю оставшуюся жизнь, послушай меня и пользуйся Очками !!😊😊😊😊😊
Ему похуй , у него раговица как у ящерицы
Согласен! Берегите глаза.
когда защиту на болгарке снимаешь, то очки уже не нужны)
На фига защита, они и так моргают, когда надо...
У этого мастера две жизни .
You do great work my friend.
Sadık usta çok yahşi bir bıçak ürettin. Ama dövüş esnasında bıçağın balçağı olmadığı için alttaki sakalı kullananın parmaklarına zarar verebilir. Bu tip mücadele aletleri her daim balçaklı olmalıdır, bunu bir ürün tasarımcısı olarak söylüyorum..
Teşekkür ederim, güzel yorumlarınız ve öneriniz için! 😊 Balçak konusunda haklısınız, özellikle dövüş bıçaklarında kullanıcının güvenliği açısından önemli bir detay. Gelecek projelerde bu tasarım önerisini kesinlikle göz önünde bulunduracağım. Değerli geri bildiriminiz için tekrar teşekkür ederim! 🔨🔪
1:28 I can already tell that this is going to have a lot of voids. You really should invest in some powered 1085
Thank you for the suggestion! Using powdered 1085 is definitely a great idea for reducing voids and improving the overall quality. I appreciate your feedback and will consider it for future projects. Thanks for watching! 😊🔨🔪
Nice work buddy thanks for sharing.👍
Thanks 👍
YOU ARE IRON MASTER !
Salam usta ellerinize sağliq. Super hazirladız👍👌
🤗🤗🤗
Для шлифовки в наше время используют гриндер ленточный он намного эффективнее, либо купи или сам сделай такой гриндер .
a question the white powder that you put on the piece what material is it? what is it for? I assume to eliminate the slag from the fusion?
I really like this guy. No talking, just doing. The knife is not an item of beauty but it is a beautifully hand crafted by someone who does this all the time. This knife is super strong and is made for duty, not beauty and not to be hung on a wall. You sir are the best and I congradulate you on the knife and the other knives I have seen youj make. Your video is truly sinplistic and done in a masterful way. Thank you for what you make. I'd buy a knife anytime from you.
Thank you so much for your kind words and support! 😊 I truly appreciate your understanding of the effort and craftsmanship that goes into my work. You’ve perfectly captured the essence of what I strive for-functional, durable knives made with care and dedication. Your encouragement means a lot, and I’m glad you enjoy the videos. Hopefully, I’ll be able to make my knives available to more people in the future. Thanks again for watching and for your wonderful feedback! 🔨🔪✨
Usta Super 👍👍👍
Très bon travail mais il manque quelques détails : protection du trançeneuse.
Gants de protection.
Lunettes de protection pour éviter les projections particulier.
Два глаза роскошь
Puede ser el mejor forjador del mundo ... pero sin los anteojos es un simple Herrero sin profecíon... primero la seguridad mi compa 👍👍👍👍
I'm from Indonesia country,🙏👍👍
Здравствуйте, интересно, какую сталь вы использовали, кроме колец с мясорубки?
Сталь от самой мясорубки )))
I really like those nice chunky handles you put on your blades.
It was great 🌟🌟🌟
やっぱこれミンチ作る時の先についてる金具だ！ステンレスだろうけど、硬さが出る鋼材なんだろうか？
Nice, those things are some hard ass steel too
Thank you! 😊 Absolutely, working with that tough steel is always a challenge, but it makes for a durable and reliable blade. Appreciate your support! 🔨🔪✨
The sound of machine your habilities in your hands is increíble i liked that 🔪👍🏻🤗🇻🇪💯
Good to see ya. Hi from USA
Thanks for coming
Genio!! Me fascina su trabajo y quisiera hacer un cuchillo a su manera. Gracias por mostrar su manera de trabajar y de forjar sus ideas, a mí me fascinan y no tengo la palabra ideal que lo califique o describa a lo que lo yo admiro su trabajo. Saludos de Argentina. Espero consejos para iniciar o realizar mi primer cuchillo. Gracias genio!!!
¡Muchas gracias por tus palabras tan amables! 😊 Me alegra saber que te inspiran mis trabajos. Para tu primer cuchillo, te recomiendo empezar con acero reciclado, como una lima vieja o un resorte, y herramientas básicas como una lima y un esmeril. La paciencia y la práctica son clave. ¡Saludos hasta Argentina y mucha suerte en tu primera creación! 🔨🔪✨
Very nice 👍
Safety squints engaged!
Impossible? Anything is possible if Master Knives is making it.
🙏🙏🙏🤝
Moc pěkná práce 👌
It amazes me how many people that don't know this guy are so damn concerned with his eye health.
Haha, it’s true! 😄 I really appreciate how much people care, though. It shows how supportive this community is. And don’t worry, I’m taking their advice and prioritizing safety more and more! 👓🔨😊
I often think the same damn thing. He's a grown ass man choosing not to wear glasses. I'm positive he knows all the risks associated with that but it's his choice to make. These comment karens can just stfu. Always worried about everyone's else's business but their own.
Although his country does not have an equivalent to OSHA, he does have free health care.
Друг анука роскажи что значит дамасская сталь и из каких миталов она собирается в литье или в ковке...
Дамасская сталь - это удивительный материал, который создаётся путём многократной ковки и сварки разных видов стали. Обычно берутся два типа стали: одна с высоким содержанием углерода (твёрдая и хрупкая) и другая с низким (гибкая и прочная). Эти слои чередуются, многократно складываются и проковываются, создавая характерный узор на поверхности.
Процесс происходит именно ковкой, а не литьём. Каждый слой добавляет уникальный узор и свойства металлу: он становится прочным, острым и в то же время гибким. Дамасская сталь славится своей красотой и практичностью. Спасибо за интерес к теме! 🔨😊
Nice safety glasses 🥴🫣
I've commented on alot of his videos about that but he doesn't take precautions on the safety of his eyes, he commented and said he doesn't use them but I've never seen him use them and I've watched several of his videos
Debería decir los productos que le pones o agregas.
Food grinder disc
Amazing workmanship...but why not use safety goggle and dust mask?
Merhaba, malzemenin üstüne döktüğü beyaz toz nedir? Ne işe yarar?
Merhaba! Döktüğüm beyaz tozun adı **boraks**. 😊
### İşlevi:
- **Akı (flux)** olarak kullanılır.
- Yüksek sıcaklıkta metal yüzeyinde oluşabilecek **oksitlenmeyi önler**.
- Metali **temizler** ve saflığını artırır.
- Özellikle **damascus çeliği** gibi katmanlı çeliklerin birleştirilmesinde daha güçlü bir kaynak oluşmasını sağlar.
Sorunuz için teşekkür ederim! Daha fazla bilgi isterseniz memnuniyetle paylaşırım. 🔨😊
@@masterknives555 çok teşekkür ederim.Başarilar dilerim.
safety glasses a must and do you sell your creations when they are complete
You’re absolutely right-safety glasses are a must, and I’m making sure to wear them consistently now. 😊 As for selling my creations, I currently can’t sell outside my country, but I’m working on making that possible in the future. Stay tuned, and thank you for your support! 🔪✨
Работать без кожуха на ушм запрещено, опасно для здоровья.
That was a lot of sparks flying around your head and unprotected eyes.
Ain’t it awesome!
Arte pura.👍
Seus trabalhos são fantásticos!
Thank you so much🙌
Schön und gut! Aber, warum trägst Du beim Trennschleifen keine Schutzbrille? Hast Du Ersatzaugen in der Hosentasche?
Danke für den Hinweis! 😊 Du hast absolut recht, Sicherheit sollte immer an erster Stelle stehen. Ich werde sicherstellen, dass ich in Zukunft konsequent eine Schutzbrille trage - Ersatzaugen habe ich nämlich leider keine! Danke, dass du dir Sorgen machst! 👓🔨
Superrrrrrr
Amazing video! Do you make your own charcoal? 😊
Thank you so much! 😊 I don’t currently make my own charcoal, but it’s definitely something I’ve considered trying in the future. I usually use pre-made charcoal for convenience. Thanks for watching and for the great question! 🔥🔨
Почему с болгарской без защиты глаз. Я замучался вам извлекать разные окалины.😢
I definitely got to get me some of those acrylic eyes 🤣
DANG!!! I wish you had some nickel powder, or some other steel powder that you could have filled each disc's holes with before you welded them all together.... that way each hole would have a good chance of staying more circular while forging and then when you ground the knife down you would see remnants of the circles....
- Ahh well.... there is always next time, right? - I think that is a purchase you should make, and it would open up a lot of new ideas for you... but I have no idea which metal powder would be the best one for you.. I have no idea what the differences are... and that's why I'm WATCHING the video about KNIFE MAKING and not CREATING THE VIDEO about knife making - YOU are the MASTER/PROFESSIONAL (and a really good one too :D )
Ela usta😊
На днях этот нож в сводках проходил??
Grind it good with a cutting disk. I think they work much better but only for a little bit. Of course sometimes they explode
I think you can get it much flatter with a cutting disk
Sizlər çox bacarıq nümayiş edirsiniz.
Var oıasız. Allah sizdən razı olsun.🙌
Those are plates from a meat grinder if you didn't know.
This Blade Wheel Keel.......Totally functional......and fingers, hands, arms and necks are merely inconveniences....Just saying. Whack a mole just entered the Twilight Zone.....
Блин я думал что-то красивое получится, а такие ножи я по пять штук за день делал.
Not everyone is the same. Some have powers that can protect themselves.
You can see in real life example on TH-cam "Carok Hasan vs Mat Tanjar" duel between 2 vs 10 people using "celurit" traditional knife. 2 people win, 4 out of 10 die. These 2 people have the power to not be hurt by sharp weapons.
Another example is that there are people who can fry food using their hands directly dipped in hot oil without getting hurt.
I hope Master knives also has spesial power to protect himself for getting hurt.
But still using safety stuff is more better to give good example for all people.
Thank you for sharing these fascinating stories and examples! It’s amazing to hear about such unique abilities and strengths. While I may not have any special powers, I truly appreciate your thoughtful wishes for my safety. 😊
You’re absolutely right-using proper safety gear is not just about protecting oneself but also setting a good example for others. I’ll definitely work on being more consistent with safety precautions in my videos. Thanks again for your support and kind words! 🔨👓✨
Great craftsmanship skills
Bellissimi coltelli,quanto costano? Grazie vladimiro
Grazie mille per il tuo interesse, Vladimiro! 😊 Al momento, non posso vendere i miei coltelli al di fuori del mio paese, ma sto lavorando per rendere possibile la vendita internazionale in futuro. Ti terrò aggiornato!
Could a knife be made from rare earth metals (yttrium, Germanium, etc)?
Чисти ржавчину коралловым кругом. Огонь штука.
Maybe a fillet knife for cleaning fish next go round. And a nice rose tea!.
OMG dude ! This one is awesome !!! That's a level up 😎 Kisses from France !
Bitte benutze eine Schutzbrille, sei ein Vorbild.
Pisau yg cantik
É disso que eu falo Brasil
Мастер просто молодец, не смотря ни на что!!!
Сварить решётки от мясорубки, с листовым металлолом - нормально!
Но на болгарке нет защиты......
Очков тоже нет....
Видать как у кота 9 жизней.....
Ну и 2 глаза роскошь.......
Элементарная безопасность, сказки для детей.
Всё, умолкаю.
Обычная углеродка
بیننده همیشگی از ایران
What type of coal are you using?
А " бенгальские огни"( когда заготовку достаёт из горна), это нормально? По моему метал теряет свои свойства.
Cool vid. Not seeing much of a pattern.
I noticed this as well. He should have filled the holes in the plates with powdered metal, and welded on the solid plates as he filled each ring. Then, when he drew out his billet, he should have oriented these holes so the they would appear on each side of the knife (instead of the way he did, which was vertically from blade to spine).
Is it was, the holes were simply sealed shut when the billet was formed, so there was nothing there to create any sort of contrast. He may as well have used solid pieces. The only contrast was from the thinner plates he used, and with nothing but a straight forging and a single set of folds, this design was never going to be anything more then a small handful of of thin slightly wavy stripes.
Awesome piece brother
Thank you kindly
@masterknives555 always enjoy your builds brother awesome craftsmanship
When you are CUTTING with the ANGLE GRINDER, DO NOT PUSH DOWN HARD TO CUT FASTER! This ONLY destroys the disc faster! I've seen two different video of people testing if it is better to push down hard on the cut or let it use it's own weight or GENTLY PUSH DOWN and BOTH VIDEOS SHOWED THAT GENTLY PUSHING IS THE BEST WAY :)
The only thing you are doing is cutting a LITTLE BIT FASTER but at the cost of DESTROYING THE CUTTING DISC - And when you cutting into quarters after the first forge/drawing out, it sure looks like you are PUSHING VERY HARD.... Yes it seems like this is VERY HARD TOOL STEEL, but you SURELY CAN eat through 2 cutting disc with those few cuts -
- - You can test this for yourself with 2 new cutting discs... using the same piece of steel that is the same size for each cut just make two cuts punishing down hard and then 2 cuts gently pushing.... the 'pushing hard' cuts will be a little but faster but you will surely see how much more of the cutting disc is GONE! :)
(If you weren't pushing hard at all, and that amount of sparks is just from the steel then I AM VERY SORRY and I did not intend to insult your skill or knowledge... I only wanted to help if I could :) )
Thank you so much for the detailed explanation and thoughtful advice! 😊 You’re absolutely right about the impact of pushing too hard on the angle grinder-it does wear down the cutting disc much faster. I appreciate you sharing your knowledge and the results of those tests.
In some cases, the sparks might just be from the type of steel, but I’ll definitely pay more attention to my technique to ensure I’m not overloading the disc unnecessarily. Your suggestion to test both methods is a great idea-I’ll give it a try and see the difference for myself.
No offense taken at all! I truly value input like this-it helps me improve my work and processes. Thanks again for taking the time to share this! 🔨😊✨
Where is your PPE?
Herzlichen Glückwunsch, die Trennscheibe nutzen ohne Schutzbrille ?! 🤨
you should protect your eyes brother
Thank you, brother! You’re absolutely right-protecting my eyes is so important. I’ll make sure to be more consistent with wearing safety glasses. Appreciate you looking out for me! 👓🔨😊
Super
J'avais le même pour faire mes ébauche de la marque (Béché )
Асалому алайкум
Well done. But why don't you wear safety glasses?
Howdy Master Seyran, what a great knife - - from meat grinder to meat slicer, inside or outside of the kitchen ! Keep pounding , I’ll keep watching !
Howdy! 🤠 Thank you so much for the kind words! I’m thrilled you enjoyed the transformation. I’ll definitely keep pounding, and it means a lot knowing you’ll keep watching. Thanks for the support! 🔨🔪✨
Молодец мужик. Ты все делаешь круто, но итог получается у тебя какое то безвкусие какое то некрасивое что то. Можно же ради столько трудов сделать красивый нож с красивой рукояткой и гардой.
Спасибо за честный отзыв! Очень ценю конструктивную критику. Вы правы, уделять больше внимания эстетике - хорошая идея. Постараюсь в будущих проектах работать над дизайном, чтобы ножи выглядели не только функциональными, но и элегантными. Спасибо за мотивацию к развитию! 😊🔨🔪
Клинок куется, а не выпиливается болгаркой. И режущую кромку нужно отковать. Тогда твёрдость кромки режущей. Это обычный тесак из магазина. Испорчена хорошая заготовка.
gostei do oculos de proteçao dele
Other knife makers: "...and now we need to fill the gaps with steel powder to remove the air from the billet and prevent cracks while forge-welding..."
This guy: casually forge-welds parts of an 1980s era meat ginder face/shield/sieve/screen (whatever it's named) with holes in it, not caring about any leftover air inside... and succeeds...
At this point you're just putting others to shame. 😂
Wonder what country hes from
I'm from Azerbaijan. Thank you for your interest! 😊
@masterknives555 woe that awesome keep up the good work
Вес ножа 3-4кг 😮
😊😊
Disculpa no hablo inglés.
как то все убого примитивно все на глазок не удивил ничем
Для гаража норм!
Meddl Loide
Кто бы ещё ему гриндер подарил😂
Value your eyes and face and hands ppe are cheaper than burns and missing digits
Без маски без очков, болгарка без кожуха😂 😂
Прилетит ....😢
Nice work buddy thanks for sharing
Thanks for the visit
Очередная серия "как делать нельзя" ))
YOU ARE WRONG !
@tretowntret7541 да щас. Посмотри Шурапа или Архангельских.
Я даже больше скажу - руки-то оттуда, откуда надо растут, а вот знания теории не хватает. Хотя Леонид Борисович не пример - он тот ещё тролль :)
@@reptilie согласен. Жалко, когда потенциальный творец на брак работает.