Hello, I bought exactly the 12V Auxito H4 KIT although on the box it indicates that it is 9V-30V of 6,000K Lumens and only by changing this it shows continuous errors in the speedometer although it is activated and deactivated, I preferred to uninstall it. I recently carried out a test by changing the quarter light bulb (12v-1w // 6000K Lumens) and it showed a complete error in the speedometer, so I put the correct bulbs in from the factory, all in turn the computer detects a better amperage and therefore turns on the sensor as if they were blown. I consider that it is a good improvement because it greatly improves visibility at night, it is cold light and does not heat the headlight glass too much and it even uses less amperage which is seen as a result of affecting the battery less, however the computer throws the error as if they were melted and it is annoying to handle like this apart from the fact that it can cause damage to the amperage sensor. Any suggestions?
Hopefully they approve it! It’s so much nicer at night. It felt almost dangerous before as I couldn’t even see my own headlight compared to all new cars with LEDs
Thank you for your reply I looked but unfortunately didn't understand.. Could you pleaee send me the video of how to connect the resistor and the type of this resistor? Thanks again
I am very much sorry for jumping into conclusion… i bought the very same light bulb for my bike and indeed.. there is no error.. just purchase the exact and same piece as mentioned here.. sorry and thank you once again.. Update... my bike wouldn't display the error when its not running..but, when it is, oftentimes the warning light together with the light warning indicator appear and disappear randomly. Totally went back to stock since it doesn’t work
looks so much better!
Hello, I bought exactly the 12V Auxito H4 KIT although on the box it indicates that it is 9V-30V of 6,000K Lumens and only by changing this it shows continuous errors in the speedometer although it is activated and deactivated, I preferred to uninstall it. I recently carried out a test by changing the quarter light bulb (12v-1w // 6000K Lumens) and it showed a complete error in the speedometer, so I put the correct bulbs in from the factory, all in turn the computer detects a better amperage and therefore turns on the sensor as if they were blown. I consider that it is a good improvement because it greatly improves visibility at night, it is cold light and does not heat the headlight glass too much and it even uses less amperage which is seen as a result of affecting the battery less, however the computer throws the error as if they were melted and it is annoying to handle like this apart from the fact that it can cause damage to the amperage sensor. Any suggestions?
Nice, I would also like to convert my S1000R to LED, I still have to wait until they have the approval from the authorities, not that easy in Germany!
Hopefully they approve it! It’s so much nicer at night. It felt almost dangerous before as I couldn’t even see my own headlight compared to all new cars with LEDs
I upgraded to the yellow H4
LEDs blind oncoming traffic imho
Canbus error codes?
No errors on mine since the install
Did you replace also position light?
Hi i installed the same led but i got light error on my dash!! how to clear the error please ? any help
Hi .you have to buy a resistance to correct the default.its easy on the web
Thank you for your reply
I looked but unfortunately didn't understand.. Could you pleaee send me the video of how to connect the resistor and the type of this resistor?
Thanks again
I am very much sorry for jumping into conclusion… i bought the very same light bulb for my bike and indeed.. there is no error.. just purchase the exact and same piece as mentioned here.. sorry and thank you once again..
Update... my bike wouldn't display the error when its not running..but, when it is, oftentimes the warning light together with the light warning indicator appear and disappear randomly.
Totally went back to stock since it doesn’t work
Sure bud.. except it works without one and there are no codes or warnings on the dash
Will try it
Your headlight is adjusted way to high.