Flipper Zero: RFID & NFC Hacking (125kHz & 13.56MHz)
ฝัง
- เผยแพร่เมื่อ 26 เม.ย. 2023
- #flipper #flipperzero #nfc #rfid #hacking #accesscontrol #hacker #howto
Anytime Fitness PWNED! RFID/NFC tag duplicator vs. Access Control Systems
• Video
Radio Frequency Identification & NFC Research with Proxmark3
www.udemy.com/course/radio-fr...
I love my flipper zero but I really want to trigger a RFID reader from 15 feet away. At my work we use weight sensors to exit the property. I own a moped. My moped does not trip the weight sensor so I would love to be able to scan my employee badge from the inside of the gate so I can exit the entrance gate so I can leave work without having to open the pedestrian gate which is the ONLY gate that has a reader on the inside. Long story short, I have to build up speed and slam my breaks to trip the weight sensor and yesterday it didnt work so I went full speed locked my brakes and ended up crashing into the gate after my wheels slid out from under me. Missing work today because of a bad knee now. I think there should be a way to amplify the range to achieve 15 feet. I would be okay even if I had to carry a back pack to worth of devices to do it. Anyone know of such a way to accomplish what I am trying to do using a flipper? I am not versed in antenna design only code and protocols. My work uses h10301 id's and they are not encrypted so they are easily clonable (already got yelled at once for doing this sadly). But at the same time, it's rather discriminatory to not allow my vehicle access to leave the property. I don't want my $2,000 moped being considered "abandoned" and taken from me. I would rather take the L on getting fired so that I am not held hostage inside a gated area. If I get fired for that, that's an easy UI claim. Either way, I don't like being kidnapped/hostage or what ever it's called.
I feel you bro
@@andrewshomemovies At least security must have done something to the gate because now i can slowly ride over it and just as my moped is about to be off the sensor it finally hits. So I can now make it off the property at work and begin a 30 minute freezing cold journey home lol... but at least I can leave now without abusing the pedestrian gate that has a badge reader on both sides.
Is there a way to extend the range of the Rfid reader?
I also want to know this because being trapped at my work SUCKS!! I am injured right now so I am missing work because our weight sensors dont like moped's and I ride a moped. The tag reader is only on the OUTSIDE of our gates which means I cannot use my badge to badge out the in gate even. I cannot drive out the out gate. I have to more or less violate state laws using a pedestrian gate (the only gate with a badge reader on the inside) and then squeeze thru it slowly before hopping the curb back onto the street. It's unlawful to ride a moped on the sidewalk where I live :( bummer. If I could only extend my range a little I could hit that reader on the other side of the gate and let myself out. I am currently thinking my only solution is to clone my h10301 tag to a keyhain style tag and then using a teloscopic pole with the tag on the end to try and hit the reader. I would love to know how to amp up my range to 15 feet lol.
I can copy nfc card at my work but can’t get doors to open while emulating it
You’ll have to write it on to a card for the manufacturer specified in the “info” when you read the nfc card
Will FZ determine/display whether RFID tag is Active/Passive/Semi Passive?
FZ? You mean fuzzing?
Can you copy encrypted cards?
NO, it's encrypted for that exact reason. Learn some actual fundamental knowledge before you ask some goddamn questions.
@@jj987987987 it's obvious im talking about if it has the software to brute attack or copy through vulnerability or middle man... It can do rolling code middle man
OP:
What's the name of the app that you use? I wanna download yours in the Flipper app via bluetooth.
The app to update flipper via smartphone?
@@ninjavelli:
I’m new to Flipper, the app that you use isn't something I have in mine, therefore I wanna know the app you were using in the clip.
this is not true, you can NOT copy/write NFC tags. You can only emulate with the flipper
bro i’m pretty sure you can ??? it’s literally an option isn’t it?
@@manasez2548 incorrect. You can write RFID 125 mhz not nfc though
@@manasez2548could be wrong but maybe nfc magic
@@Daddymcgoo2000 You are correct. I cloned my 125 khz RFID tag that is a H10301 no problem. However you are off with your frequency by a factor of 1000 because its kilohertz not megahertz ;). Even my modified flipper zero cannot write NFC only RFID.
if you enable debug logging, you can get the info you need for cloning it using a proxmark easy.@@scriptles