Fix filament Jam issue with E3D V6 full metal 1.75 mm throat

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ม.ค. 2019
  • Hello friends

    My recent upgrade to anet i.e bowden setup with E3D v6 hotend has some issues. While printing the filament jams in the hotend at the entry point of throat. I experiment with retraction settings etc but result is the same.

    Hence finally i decided to change the throat with 4.1 mm bore where the PTFE tube will go upto nozzle and guide the filament upto nozzle which solves the issues.

    There are so many prints are failed to this filament jam issue. So checkout this video and if any suggestion / question please comment below.

    If you like our video please subscribe our channel and hit the bell button for future video notifications

    # project
  • วิทยาศาสตร์และเทคโนโลยี

ความคิดเห็น • 32

  • Delslogos 3D Printing
    Delslogos 3D Printing 3 ปีที่แล้ว

    Great video, just need to add if you are doing anything with your hotend to make sure to re-level the bed before you start to print. Keep up the good work.

  • krishnañ kv
    krishnañ kv 6 หลายเดือนก่อน

    Thanks bro....this really help me to clear the e3dv6 clogging... everytime i used to buy all metal hotend still facing the same issue i see ur video then changed to 4.1mm bore and the problem fixed...thanks for sharing this video bro

    • Aakaar Lab
      Aakaar Lab  6 หลายเดือนก่อน

      u welcome

  • Dariusz Wojtaszko
    Dariusz Wojtaszko 10 หลายเดือนก่อน

    Hello. are there better printing results after switching to bore 4.1? I wonder if I should change my full metal to bore.

    • Aakaar Lab
      Aakaar Lab  10 หลายเดือนก่อน

      try sir the jam issue will be gone print result will be better

  • Randy Chua
    Randy Chua ปีที่แล้ว +2

    I'm also having the filament jam issue with the all metal heatbreak, ordered the ptfe lined heatbreak and hopefully it can solve the problem

  • Jzf Lmr
    Jzf Lmr 2 ปีที่แล้ว

    Do you have stl for your v6 direct mount? I was looking for some simple one couldn find it and here you go.. PPL make big one w two fans atc look like a wind tunnel lol

    • Jzf Lmr
      Jzf Lmr 2 ปีที่แล้ว

      about the throat i was just asking, but i have clone and now got e3d v6 original never used either of them i like your simple setup. want to do this first thats why was asking for stl. later i have titan coming but thats for after i build Am8 with mgn12h linear have all coming but first want to do your setup.

    • Aakaar Lab
      Aakaar Lab  2 ปีที่แล้ว +1

      Yes but what type of arrangement u have i didnt get u. So please tell me clearlly so that i can sharr the stl file. The mount in this video the stl file available in thingiverse. Checkout there . In thingiverse search aakaarlab

  • danlatu
    danlatu 2 ปีที่แล้ว

    4.1mm throat max heat? Can I print nylon with this setup?

    • Aakaar Lab
      Aakaar Lab  2 ปีที่แล้ว +1

      Sir i not checked for nylon yet i am using max 250 deg without issue. When i test it i will get back to u

  • Jzf Lmr
    Jzf Lmr 2 ปีที่แล้ว

    If you take out the PTEF tube out off stock clone throat it will be 3mm bore will it work?

    • Aakaar Lab
      Aakaar Lab  2 ปีที่แล้ว

      www.thingiverse.com/thing:3154297

    • Aakaar Lab
      Aakaar Lab  2 ปีที่แล้ว

      @Jzf Lmr super

    • Jzf Lmr
      Jzf Lmr 2 ปีที่แล้ว +1

      i just have bunch a thoats from v6 clone with teflon tube so was asking.Now i am still using stock Anet setup i print prtg, abs, asa with it no problem w the heat so far 245-250c when i tuk the thoat out there was litle of melt but change it and works ok dont print a lot.

    • Aakaar Lab
      Aakaar Lab  2 ปีที่แล้ว

      Share the throat u have i will see once

    • Aakaar Lab
      Aakaar Lab  2 ปีที่แล้ว

      I think it wont. ptfe tube some what works like a heat insulator it will maintain hardness of filament. If throat is hotter the filament may starts jam since the filament softer when heat rises.

  • Paul Tsoi
    Paul Tsoi 2 ปีที่แล้ว

    I have the same problem. The filament melt and jam inside ptfe tube. Do you think a water cool jacket can solve the problem?

    • Aakaar Lab
      Aakaar Lab  2 ปีที่แล้ว

      @Paul Tsoi I will try it first then I will

    • Paul Tsoi
      Paul Tsoi 2 ปีที่แล้ว

      @Aakaar Lab can u explain more detail why it will not work? Thx.

    • Aakaar Lab
      Aakaar Lab  2 ปีที่แล้ว

      I think no sir

  • Yaash
    Yaash 11 หลายเดือนก่อน

    There's no explanation of the issue here.

  • someoneonlylol
    someoneonlylol 3 ปีที่แล้ว +2

    The only reason it jammed is because you bought a cloned heatsink. Genuine e3d heatsinks have to be machined to have smooth interiors

    • Arturo Mendéz
      Arturo Mendéz 2 ปีที่แล้ว +1

      I just have tried with a Original E3D V6 and have such problem. I returned to my clone one that works. Certainly I was not satisfied with this clone so I decided to buy a original (Amazon 70 USD) that never works at all.
      Obviously E3D V6 was installed as several tutorial says. A gap between nozzle and aluminum block tighten after warm up,....

      First attempt to repair was to replace PTEF tube that worked only for 2 hours. Replaced two more tubes without any success. I am still working with my old clone hotend.

      Any idea how to fix it?

    • martiens botha
      martiens botha 2 ปีที่แล้ว +2

      You are absolutely right in saying that the it is because it is a clone (cheap Chinese knock off) But this is our problem. We are living in 3rd word country’s where the clone E3D V6 is the only one that we can get, or if you can get the genuine E3D V6, it costs ¼ of the price that the printer costed. I can get hold of a Swiss Micro heat brake but this will cost me 5 x more than the whole clone hot end assembly costed. I just replaced my all metal heat brake with a PTFE lined heat brake and live with the fact that you can’t print at over 240 degrees Celsius

    • Aakaar Lab
      Aakaar Lab  3 ปีที่แล้ว

      @someoneonlylol ok i will brought that to

    • someoneonlylol
      someoneonlylol 3 ปีที่แล้ว +2

      Its not the filament which is an issue its the heatsink. It has to be smooth enough for filament to flow at high temperatures which is why people still buy genuine e3d and microswiss if they want to print high temperature materials

    • Aakaar Lab
      Aakaar Lab  3 ปีที่แล้ว

      One of my friend has fladh forze and cr10 printers with e3d and mk8 setup but he also experience same issue. Note that its not for all filaments of different manufacture

  • mysilentwarrior
    mysilentwarrior 2 ปีที่แล้ว

    Yu instal da trot...