Just a Sequential Custom LED Strip
ฝัง
- เผยแพร่เมื่อ 23 ก.ค. 2024
- People ask me about the cost to get a simple setup: "Just a Sequential LED Strip" and I genuinely want them to know whats involved in working with these custom parts, and the time needed to just assemble one of these strips.
Make sure you're in the Discord server to ask questions and hang out with other builders!
I'll do some follow ups to this, including some training for programming custom animations into the strip, with endless possibilities for your show modes!
FOLLOW ME ON SOCIAL MEDIA
IG: / flyryde
FB: / flyryde
Twitch: / flyrydechris - ยานยนต์และพาหนะ
This is exiting !!!!! Thank you for showing the soldering part to the led and how to set power! I’m learning as much as I can for my Ford Fusion!
I missed these kinds of vids. This was an awesome watch.
These bi color LEDs are my favorite 🔥 miss these type of videos bro. Keep it going!!
Got your bicolor on 3 channels now too 😁. I swear you must be the only one, I don't think most people know what they are or the benefits.
hillbillyhydrographicsandvinyl.com/products/led-5050-6-channel-wyr-rgb-bipolarity
Dude it blows my mind that these videos get so much love. We literally shot and edited 2 hours start to finish 😅
Amazing!! Been binge watching all your videos to gain as much info about lighting as I can before I work on my own setup. I do want to see you mess with a morimoto sealed 3 projector(headlight) but because they're new from morimoto and I'm thinking of using one for my build.
Perfect timing on this video since i literally just received my led Stripz from Yunique Led!
I got a board of white/ amber and a board of red / amber.
Just a couple weeks ago, i also got these same style led panels but from corsomotion that I had custom made with red and white leds.
how do you get just the led strips i looked on the Yunique Led site and cant find just the white/ amber led boards
Definitely an informational video
You got some patient skills to be soldering all those little wires in there!!!!!awesome job!!!!
Thanks for watching 🙏 Would you believe these are the easier strips to solder 😅
Where can I find these parts from Unique LED? cant seem to find them on insta or online.
Congratulations for the video, very well explained, one question: where do they sell the module that turns on the leeds? Regards.
This is what I’ve been looking for !!!
What are your plans for them?
@@flyryde il send ya some photos over on email if you’d like? So far it’s I’m nearly fully LED convertered on the old civic, I’ve tinted the lenses with a different style, at the mo I’m working on a long light bar that fits under the back seats I wanna start programming!
Thank you for your insightful videos. I am in South Africa. I have a 2012 Suzuki Kizashi which came without drls. I bought the twenty dollar 23 inch flexible strips and stuck them with white 3m double-sided tape inside bottom of lenses and curved them to the sides of lenses. (Forward facing)
They have functioned without fail since 2019. I feel it's now time for upgrade but keep the appearance simple as it is. (I can send a video clip).
I basically want more led's per strip. What is the best you can do if your strips cannot curve gently and at what price?
Jay.
Really awesome video. Thanks a lot for this. What surprises me, however, that YuniqueLED still sells exLED LED emitter products, although exLED has not received any responses to inquiries for several years. Unfortunately, I haven't had a good experience with the Koreans. Many greetings from Dresden Germany ....
Very informative. Thanks
Thanks for watching!
In the video you said you would link to the tools and most importantly the LED strip itself. I dont see any links though. I am subscriber and email subscribed on your site btw
Very straightforward.
Hey dude, how are you!
Hey quick 2 part question. Where can I buy that board? and did you get it with lights or without?
Do you not use soldering flux for small components? I do DIY electronics occasionally as a hobby, and soldering flux helps quite a bit in keeping molten solder from shunting small connections by making the solder stay on the metal pads.
hello, what is this type of LED that glow white and yellow? Thanks and GJ
Any other videos on how to make them? I want to make a small led strip for my sidemarkers?
Yup, lots dude.
Make a board with a few drilled holes so you don't lose the ends of the cables, if you aren't removing the spools all the time
Hi,where can i buy these led bar?
Please let me know the link to buy online
Can u shape them into a v shape like the Lexus headlights
Hey how do I Ordered a These type of LEDs
How much is a drop in for e70 x5?
Where do I buy these leds ???
Faster way to tin the cables: solder heat pot, keeps a bath of solder where you can just dip the cable in to tin it
My cable for the heat pot is trashed, and that thing kinda freaks me out to be honest.
@@flyryde you work with cables all day yet the one useful one is trashed haha, jk, well, yet it is the easiest version, or let's call it most comfortable, you could also use flux, sticks like honey, is cold, makes the solder flow on the cables easier, but is double the work ;)
@@Tarex_ I really don’t work much in the workshop anymore my man. Long enough to teach something in a video, but I truly would rather be making videos than lights.
@@flyryde on the one hand i can fully understand you and know where it's coming from (I'm in the process of getting a startup going and have been building up to it for a while) on the other hand it's of course a sad thing, great videos, well the technical ones since I'm in germany and the Ghozt modules aren't a thing here.. but i'm subscribed and will watch whatever you fabricate
@@Tarex_ I’m just getting warmed up dude. Wait till you see what I get to build and make videos about, once I’m not longer a slave to the trade.
That’s when I’ll REALLY be able to help people with my content here. Till then I’m just doing my best with what I have available. I’m patient 👍
Are these leds available ..and but where
I have an auxbeam led 6 mode 20" light bar, three wire unit. It works a couple of times and never works again. I'm on my third one from auxbeam. They don't know why it stops working, so just send me another one. We'll. I don't want to hook up the third one and have it not work. For you do you might know what might be happening to the light bar
How we purchase
so can you do this with an addressable led strip instead?
So yes. 👍
white amber led code ? or name ? smd chip name ?
What’s the correct name of the leds can u share a link to them
These are a two channel or bicolor LED. Just like a RGB LED is a 3 channel. Not to be confused with bipolar LEDs which are typically 2 color also but they only have 1 set of connections.
Bi color is available from most parts houses like Mouser or even super bright LEDs. They also come in a 5mm through hole if your just starting and want something a little easier to work with.
bit.ly/Ledstripz
Hi, how are you? My name is Erasmo. I want to congratulate you because you do some excellent jobs. I live in the state of Maryland. I would like to know if you can give me a job for a honda accord sport 2017.
Thanks dude! I’ll announce some new ways to get me to build lights for people in the hopefully near future. Till that happens though I can’t accept new custom build jobs.
Dude are they look a bit easier to work with
This is one of the easiest strips out there for v5 Ghozt sequencers or even Corsomotion Sequencers
haha sup
Is there any way or place to make custom lenses for the headlight?
I need one but flexible...
CAn I order 2 of this flexible for my side mirrors
What is the Link to the ribbon cable tool?