Civil QC Interview Questions ■Audio Clip■ Details can be checked from the description.
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2024
- The following questions have been addressed in this audio lecture:
Chapter
0:00
🛑1. How would you manage if the excavation level exceeds the specified depth set by the construction team?
01:35
🛑2. What steps should a Quality Control (QC) take if loose soil is encountered below the foundation during excavation?
03:15
🛑3. Upon completion of excavation, how does a QC proceed with determining the soil type and initiating work?
03:25
🛑4. How can a QC determine whether the foundation load exceeds or meets the specified limit of 320kpa?
3:50
🛑5. What methods does a QC employ to ascertain the necessary compaction level for a structure?
4:20
🛑6. How can a QC interpret soil sample reports and analyze sieve analysis graphs to identify soil types?
6:20
🛑7. What precautions should be taken during curing, and how can violations be prevented to avoid core test or rebound hammer test?
7:00
🛑8. What aspects of the concrete delivery note should a QC inspect upon receiving concrete on site?
🛑9. Can you distinguish between Red line, Technical Query (TQ), and as-built drawings?
🛑10. Under what circumstances should a QC raise a TQ?
10:40
🛑11. If there is a discrepancy between the IFC drawing and Aramco/International standards, should a QC raise an INCR or TQ?
10:50
🛑12. How many types of violations are identified by Aramco?
11:05
🛑13. What is the distinction between Proactive notification, LBE, standard violation, and NCR?
14:10
🛑14. What precautions should be taken before and after pouring mass concrete, aside from their definitions?
14:50
🛑15. How should concrete be poured for a wall with a height of 10m?
15:20
🛑16. What level of tolerance is acceptable in concrete mix design?
16:40
🛑17. What are the three types of anchor bolts, and what strength is required for each according to ASTM standards?
16:45
🛑18. Should the edge distance between an anchor bolt and concrete edge increase if the diameter of the anchor bolt increases?
17:25
🛑19. Who is responsible for issuing an ACD for any violation?
🛑20. What are the consequences if a company or contractor fails to close an INCR within the specified ACD time frame?
🛑21. According to which standard, what tolerance is permitted between two reinforcement spacings?
🛑22. According to which standard, what tolerances are allowed in concrete cover for walls, beams, columns, and foundations?
🛑23. According to which standard, what spacing should be maintained between two reinforcement bars?
20:50
🛑24. What types of drawings are used to initiate construction work, and which drawings are relied upon by the construction team?
21:00
🛑25. Who is tasked with preparing the method statement of work for an activity?
Thank you for exploring these topics with us. #2iconstructions #approvals #aramco #concrete #civilengineering #letsexplore #educationgateway #construction
• Civil QC Interview Que...
The following questions have been addressed in this audio lecture:
🛑1. How would you manage if the excavation level exceeds the specified depth set by the construction team?
🛑2. What steps should a Quality Control (QC) take if loose soil is encountered below the foundation during excavation?
🛑3. Upon completion of excavation, how does a QC proceed with determining the soil type and initiating work?
🛑4. How can a QC determine whether the foundation load exceeds or meets the specified limit of 320kpa?
🛑5. What methods does a QC employ to ascertain the necessary compaction level for a structure?
🛑6. How can a QC interpret soil sample reports and analyze sieve analysis graphs to identify soil types?
🛑7. What precautions should be taken during curing, and how can violations be prevented to avoid core test or rebound hammer test?
🛑8. What aspects of the concrete delivery note should a QC inspect upon receiving concrete on site?
🛑9. Can you distinguish between Red line, Technical Query (TQ), and as-built drawings?
🛑10. Under what circumstances should a QC raise a TQ?
🛑11. If there is a discrepancy between the IFC drawing and Aramco/International standards, should a QC raise an INCR or TQ?
🛑12. How many types of violations are identified by Aramco?
🛑13. What is the distinction between Proactive notification, LBE, standard violation, and NCR?
🛑14. What precautions should be taken before and after pouring mass concrete, aside from their definitions?
🛑15. How should concrete be poured for a wall with a height of 10m?
🛑16. What level of tolerance is acceptable in concrete mix design?
🛑17. What are the three types of anchor bolts, and what strength is required for each according to ASTM standards?
🛑18. Should the edge distance between an anchor bolt and concrete edge increase if the diameter of the anchor bolt increases?
🛑19. Who is responsible for issuing an ACD for any violation?
🛑20. What are the consequences if a company or contractor fails to close an INCR within the specified ACD time frame?
🛑21. According to which standard, what tolerance is permitted between two reinforcement spacings?
🛑22. According to which standard, what tolerances are allowed in concrete cover for walls, beams, columns, and foundations?
🛑23. According to which standard, what spacing should be maintained between two reinforcement bars?
🛑24. What types of drawings are used to initiate construction work, and which drawings are relied upon by the construction team?
🛑25. Who is tasked with preparing the method statement of work for an activity?
Thank you for exploring these topics with us. #2iconstructions #approvals #aramco #concrete #civilengineering #letsexplore #educationgateway #construction
th-cam.com/video/9GGzAgBQGXU/w-d-xo.htmlsi=Z3naLILwfD_r-jbd
Thank you soo much sir
Best wishes for your future success.
Super
This type of audio clip will help too much
Thanks
Best Video Please make Some More like This One ❤❤
Appreciated❤❤❤
Kindly gave the answer of (As QC how you know loads is more than 320)
It has been noted on equipment and in vendor/NMR drawings. The engineer will analyze and design the structural member accordingly.
On-site, as a quality control inspector, verification can only be performed using NMR drawings and the equipment tag plate.
@@2iconstructions918 NMR stands for?
Do this interview have another part also if yes Please share link plzzz
th-cam.com/play/PLRB7OxFXVmxgQ2nfXT8JWnR5uF6Igglo1.html&si=1LqKDffPvbE1zjjF
This is the playlist for interview preparation
@@2iconstructions918 i review your Chanel So good so far But these Questions are scenario based I wish you could make another video like this 🙏
@ziawazir7861 we will try our best, need your support
What is LB
Logbook
th-cam.com/video/dd19o9oS4sc/w-d-xo.htmlsi=f_l7CI4CqEVwBq2L
Watch this video for detailed information 👌
"LBE" "Log Book Entry." "LBE" refers to recording relevant information in a logbook. These entries typically document activities, events, observations, or maintenance tasks for record-keeping, regulatory compliance, or reference purposes.
Log book entry (the first stage of reporting deficiency manually use log book entry
TQ means????
Technical Query
Technical queery
Please in se ap SAEP py audio clips bnway
@@sajidkhan-dl2lv
We sincerely apologize for the informal nature of the initial segments of this audio lecture, as well as for the unplanned nature of the recordings within this playlist. Originally intended solely for personal archival purposes, we have recognized their potential to benefit others seeking knowledge. We humbly ask for your understanding regarding any inconvenience caused and encourage you to concentrate on the educational content provided. Thank you for joining us on this journey of enrichment.
🛑🛑Within this audio lecture, the following topics have been comprehensively addressed:
00:10 Phases of construction projects
00:40 Moderate violation
01:38 Major violation
02:25 Repeated violation
03:00 Major violation
04:00 Example
05:20 PCS (Project Completion Stage)
PMCC (Partial Mechanical Completion Certificate)
FMCC (Final Mechanical Completion Certificate)
No Category = Minor violation
Yes Category = Major Violation
05:50 Yes and No Category
08:30 G.I MPCS (Mechanical Performance Closeout System)
09:50 Walkthrough and punch listing.
th-cam.com/video/2IOTIsnsBzk/w-d-xo.htmlsi=kxuX9PyNXzw8nDKY
@@sajidkhan-dl2lv In Aramco projects, TQ stands for Technical Query. It's a formal process used to seek clarification or resolution on technical matters related to engineering, construction, or other project-related activities. TQs help ensure that all parties involved have a clear understanding of the project requirements and specifications, ultimately contributing to the successful execution of the project.
For second question answer is (CLSm) I think
In one of my interviews, I repeated the interviewer's same line back to him. 🤨 He got angry and asked if I wasn't 100% sure, how could I possibly achieve the minimum quality requirements? 🤔
FYI, in SA projects, every material needs to be approved and should be from approved sources. CLSM needs to be approved prior to use in such cases, which is a lengthy process (If necessary, we'll have to take approval). While structural and binder concrete are used normally on a daily basis and were approved earlier at the start of the project. So, with ID permission and mutual agreement, we'll go with lean, while in some cases, with structural concrete. #construction #engineering #qualitycontrol
🚨🚨Alternatively, you could approach this matter strategically by discussing it with the relevant department and obtaining prior approval before proceeding..
2.3 Over-excavation at footings shall be backfilled with compacted Select Fill as specified in sections 6.2 and 6.3, CLSM, or lean (1,000 psi minimum 28-day compressive strength) concrete.
SAES_A_114
@arabvibes4620
Very informative kindly make more videos
Thank you brother..