AutoCAD 3D to 2D Conversion Tutorial - Part 1 of 2

AutoCAD 3D to 2D Conversion Tutorial - Part 1 of 2. This tutorial shows how to convert 3D model to 2D drawing in AutoCAD step by step from scratch. AutoCAD commands used in this tutorial are: Layout drafting standard setup, Base view from Model Space. This will also show how to create section views. This will convert AutoCAD 3D to orthographic views. Briefly topics covered in this tutorial are:
Learn to create 3D model used in this tutorial for conversion:
• AutoCAD 2019 3D Tutori...
- How to convert 3d to 2d drawing in AutoCAD
- AutoCAD 3d to 2d convert
- AutoCAD convert 3d to 2d drawing
- Convert 3d model to 2d drawing in AutoCAD
- Convert 3d to 2d drawing in AutoCAD
- How to convert 3d drawing to 2d in AutoCAD
- How to convert 3d drawing into 2d in AutoCAD
- AutoCAD 3d to 2d projection
- How to convert 3d to 2d in AutoCAD 2019
#CADCAMTutorials #CADTutorials #AutoCADTutorial #AutoCAD2019 #AutoCAD #autocad3d
Learn more about AutoCAD in following playlist:
AutoCAD Tutorials for Beginners Complete: • AutoCAD Training Exerc...
AutoCAD Full Tutorials: • AutoCAD Tutorial for B...
AutoCAD Isometric Drawing Tutorials: • AutoCAD Isometric Draw...
AutoCAD 3D Modeling Tutorials: • AutoCAD 3D Tutorial fo...

[@MyPetVide0s]

this the thing what i am searching of in youtube. godjob great.

[@muhammadtahir9462]

I always searching for getting new commands it's my goodness to find this. Thank you very much for this tutorial.

[@CADCAMTutorials]

You're welcome 😊

[@allbeit582]

Your tutorials are so detailed....perfect....thank you

[@CADCAMTutorials]

You're welcome 😊

[@ramses773]

great job teaching, better than any College teacher Ive ever had.

[@CADCAMTutorials]

Thank you 😊

[@armandomacamo7047]

I'm so grateful! Muito Obrigado, estava mesmo a precisar

[@kingA_1822]

I love you yarrr....🔥🔥🔥
Thank you so much bro
I need it and i learn it 🙏🙏🙏🙏

[@stef2465]

Thanks, man, helped a lot

[@ashishmahale1415]

Very well explained sir,
Thank u very much.

[@suvronaskar9757]

Thank you very much sir .. nicely explained❤

[@farizalazamuddin6306]

Very well explained. Thank you !

[@CADCAMTutorials]

You're welcome 😊. Please subscribe to get new video notification and please like and share the video.

[@alguderadhika989]

Great knowledge and awesome explanation ....

[@jacobsimonnavarro4534]

THANK YOU SIR, YOU ARE FANTASTIC!!

[@balishreddy7959]

Very informative thank for the tutorial sir.

[@amolthokle6614]

Better than the best tutor I found

[@CADCAMTutorials]

Thank you 😊

[@TRUSHAR_]

so much detailed and accurate , thankyou sir.

[@CADCAMTutorials]

You're welcome 😊

[@BARTLANTV]

Thanks for this video, this is awesome....

[@gunerakgun9777]

thank you sir, you are great

[@victorycious21]

Can you help me how to change the thickness of the line that is displayed on the layout when we have changed the 3D display image to 2D? Thank you

[@ipc3024]

Thank you sir very informative

[@CADCAMTutorials]

Most welcome 😊

[@eahmedshendy]

I have a question thinking you can help me with.
I do it hard imagining drawing a complex box in 2d world, so I thought to draw it as 3d model in some software like autocad, then maybe I can get the parts as 2d to import in CorelDraw .. it is directly possible? or with some workaround? can you point me on how to learn to do it?

[@leninreddy5332]

ty cuz ive been having a hard ti getting started.

[@CADCAMTutorials]

You're welcome 😊

[@allinone-hy1jw]

Thank you sir

[@MohamedElngredy]

Great Video!
Just one question, Can I do the exact same in AutoCad with a 3D drawing exported from 3dsmax??

[@paulmorrey733]

Thanks Great video

[@CADCAMTutorials]

You're welcome 😊

[@mutaleb1969]

thank you

[@Artist.nagaraj]

Hi,, can you tell me how to use removed multiple sections solid by using guide in CATIA

[@gv9652]

THANK YOU.

[@CADCAMTutorials]

You're welcome 😊

[@abdulghani2084]

Ok bht bht Shukriya
And kindly share the list of interior designing drawings and furniture drawings?

[@apschiount]

Thanks...

[@deljojosunny7669]

After drawinv completed in layout model is in balck color, how can i fic it?

[@samuddhaofficial4303]

Its not showing drawing view creation tab. Why is that?

[@akeenegamer8730]

It doesn't work for me. It says "Unable to perform the requested action. This drawing was last edited with model documentation in a newer version of AutoCAD. What should I do with it? How can I make it work? Please respond asap thank you.

[@shotsbyjoji]

When I click on "From Model Space" it select the move command rather then "enter new or existing layout". Kindly help me what should I do (AutoCad 2024)

[@alifyusri8758]

PAKKK ALIFF HADIR PAKKKK

[@alifyusri8758]

Aku dari masa depan

[@ilhamdwicahya2697]

mantapp❤

[@yaconbezzahi3567]

I follow the same thing, but when I click on base button, it won't insert the drawing, it keeps asking for object corner. I keep clicking in many corners but nothing. please let me know what would the problem and how to sort it out

[@Deepakkumar-wc9zj]

Sir mere AutoCAD software me jb mai viewbase command use krta hu to " inventor server failed to load" show hota hai... please tell me sir solution of it...?

[@cristicioaba3029]

Can this be reversed? Once the drawing it is saved can be generated a 3D model from this ?

[@ranelopamin6584]

What if the model is long but need to present in bigger scale and won't fit in the paper space, in oldways will have multiple viewports cuts in different parts of the model like for instance steel beam will show only the important part where there is connections, how do you present that using this 3d to 2d technique?

[@CADCAMTutorials]

You can create detail view. Showing particular portion larger.

[@xxxlukxxx613]

You should use First Angle Projection in case you're using Metric system. Otherwise great video

[@chiekepeter-paul2635]

Please my object is still in wire frame not auhographic view

[@timwallace8126]

You are a god

[@CADCAMTutorials]

Thank you 😊

[@hobbysilvasouza]

MUITO OBRIGADO

[@CADCAMTutorials]

You're welcome 😊

[@christianrodriguez6939]

on the view tab I can't find it, is that on because I am using mac?

[@mehulchaudhariiitb2765]

Are you talking about the "Base" option? If yes, then it's true. It's not available on mac devices as well as softwares with 32 bits

[@prakini1]

can u show how to dimension those view too?

[@CADCAMTutorials]

Link to dimension video th-cam.com/video/LZ4Pasg8odc/w-d-xo.html

[@canderinoz2288]

Does anyone know how to do this on Mac? 😪

[@omboyflorenvied.6473]

Is 3d hidden similar to realistic?

[@CADCAMTutorials]

No

[@surya.yadav.]

Sem tutorial hindi me bana do plz

[@nileshbind0749]

Bhai apki awaj bahut jada slow hai sunayi nahi deta sahi se

[@user-fs1mh6kf9e]

И здесь Английский-Индийский ((( Иль биль траель туметроикь трэш трэш )))

[@ttt11yt59]

extensions/tutorial/free/most-popular