Stenter Machine Front Side Operating | Bruckner Power Freme | Stenter Machine Operating Porbo 2
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- Bruckner Stenter Machine Front Side Operating
Stenter Machine Operating Bruckner power freme
A stenter machine is a textile processing machine that is used to stretch and dry fabrics. The front side of the stenter machine is the side where the operator controls the machine and the fabric is fed into the machine for processing. Here are the steps for operating the stenter machine from the front side:
1. Preparing the Fabric: The first step is to prepare the fabric for processing. The fabric is usually cleaned, dried, and inspected for any defects.
2. Feeding the Fabric: Once the fabric is prepared, it is fed into the stenter machine through the front side. The operator needs to ensure that the fabric is aligned properly and the edges are straight.
3. Adjusting the Tension: The tension of the fabric needs to be adjusted according to the type of fabric being processed. The operator needs to adjust the tension using the tension adjustment knobs.
4. Adjusting the Width: The width of the fabric needs to be adjusted to ensure that it is evenly stretched. The operator needs to adjust the width using the width adjustment knobs.
5. Setting the Temperature: The temperature of the stenter machine needs to be set according to the type of fabric being processed. The operator needs to set the temperature using the temperature control panel.
6. Setting the Speed: The speed of the stenter machine needs to be set according to the type of fabric being processed. The operator needs to set the speed using the speed control panel.
7. Monitoring the Process: The operator needs to monitor the fabric as it goes through the stenter machine. Any issues or defects should be noted and addressed immediately.
8. Removing the Fabric: Once the fabric has been processed, it is removed from the stenter machine through the front side. The operator needs to ensure that the fabric is removed carefully and without causing any damage.
By following these steps, the operator can successfully operate the stenter machine from the front side and produce high-quality fabrics.
1St porbo Link :
youtu.be/py6Nr...
3rd Porbo Link:
• Bruckner Stenter Machi...
#Stenter_Machine_Front_Side_Operating
#Bruckner_stenter_machine_operating
#the_message_all_time
Welcome to my channel
please subscribe now
The Message All Time
Very good and informative. I was in procurement Department in DIRD group.
❤❤ nice
Vai Vai protik motor nam bolte hobe asha Kori bolben ar akta Kotha stenter m/c padder pick up somporke janan
Brather thies photosensor no,it is asensor name is febric center controler
good job
very good
Osadharon
Thanks brother, please give more details
Ok next time
Sound kome gelo keno
Nice video
Thanks
Brother... Wheel brush,pin bar,pin clip,chain lagle amk inbox
অনক কিছু জানলাম
Excilent vido
Ai machine Muzzi stenter coating machine er moto
loop steamer er kno vdo ny
Oparetor lagla bolben
Ok
ভাই4,নাম্বার,পববানাইবেন,না,কথা,গুল,আর ভালভাবে,বলেন
apnar kisu vul information royese segulo suddho kore niben
Vai