TWO WAY SLAB DESIGN IN STAAD PRO V8i

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 ธ.ค. 2024

ความคิดเห็น • 48

  • @nicolasmarie4398
    @nicolasmarie4398 5 ปีที่แล้ว

    Please advise more on the loading and how it is applied on the slab. It seemed to me that we should add DL and LL and Design Load Combination. Why use mesh instead of plate? Can we add the mesh or plate in one single step over a whole project or it should be done in multiple steps along the various bays. Normally the DL along with Finish Floor and Waterproofing and Live Load is added, multiplied by factors and applied to the slab. The Beam takes the needed or tributary load from the slab (this should be done by the application) and its self-weight. The Column takes tributary point load from the various beam coming into it + its self wright. What about wall loads on the beam? Am I correct and how does staad pro deal with the loads?

  • @sudiptaboral4018
    @sudiptaboral4018 6 ปีที่แล้ว +2

    Plz show, how to check reinforcement of this slab ????

    • @engrkaribul
      @engrkaribul 6 ปีที่แล้ว

      have found the solution?

  • @shahukumarkambale9764
    @shahukumarkambale9764 4 ปีที่แล้ว

    Very informative

  • @dinukago
    @dinukago 7 ปีที่แล้ว +1

    what is the difference between floor load and plate loads?

  • @pothulaiahsake6667
    @pothulaiahsake6667 3 ปีที่แล้ว

    Please design the one way slab also

    • @vibhorshukla850
      @vibhorshukla850  3 ปีที่แล้ว

      Sure in next upcoming video I will discuss about it :)

  • @aanqu
    @aanqu 7 ปีที่แล้ว +3

    He forgot to assign the Selfweight to the whole structure when he changed the mesh, so technically the result is wrong. .

  • @suryakantpandey4897
    @suryakantpandey4897 4 ปีที่แล้ว

    How to read slab result how it provide detailing.

  • @vikrantchaudhary880
    @vikrantchaudhary880 7 ปีที่แล้ว +1

    What is a reason behind giving default number of bountry meshes is 10

  • @abuahamed9594
    @abuahamed9594 5 ปีที่แล้ว

    sir, where is the slab result? please show us it is carrying load or fails to carry the load.

  • @veer2806
    @veer2806 6 ปีที่แล้ว +1

    Stand pro can't be used to design slab or to get details of rebars in slab as per is 456

  • @shahukumarkambale9764
    @shahukumarkambale9764 4 ปีที่แล้ว

    Show the design of steel

  • @shaik229
    @shaik229 4 ปีที่แล้ว +1

    Sir, how to check reinforcement details of slab and spacing in output results

    • @vibhorshukla850
      @vibhorshukla850  3 ปีที่แล้ว

      Go to Run analysis and then click view output file there you can see the reinforcement details of beam column and slabs also .

    • @jeevan35
      @jeevan35 3 ปีที่แล้ว +1

      @@vibhorshukla850 in video u didn't show slab results

    • @vibhorshukla850
      @vibhorshukla850  3 ปีที่แล้ว

      @@jeevan35 you can check slab results in the drop down by sliding down in the Staad Analysis Results.

  • @analysisandcreatureofworld8003
    @analysisandcreatureofworld8003 7 ปีที่แล้ว

    if i give plate ,then beam analysis is Tee or rectangular???

  • @eznarafiq5386
    @eznarafiq5386 5 ปีที่แล้ว +1

    Thank you so muchhhhh..it means a lot....

    • @vibhorshukla850
      @vibhorshukla850  5 ปีที่แล้ว

      Welcome so much 😊Thank you Keep sharing Keep Liking 😊

  • @suryakantpandey4897
    @suryakantpandey4897 4 ปีที่แล้ว

    How to read the slab design output report.

  • @venkulraina4283
    @venkulraina4283 5 ปีที่แล้ว +1

    And how to choose reinforcement detailing

    • @vibhorshukla850
      @vibhorshukla850  3 ปีที่แล้ว +1

      Sure in next upcoming video I will discuss about it :)

  • @m.shaihanayub7179
    @m.shaihanayub7179 7 ปีที่แล้ว

    So how much should we keep the mesh size?

  • @DharanidharGanthia
    @DharanidharGanthia 6 ปีที่แล้ว +1

    Show slab reinforcement please

    • @engrkaribul
      @engrkaribul 6 ปีที่แล้ว

      have found the solution?

  • @nachiketmittal4589
    @nachiketmittal4589 5 ปีที่แล้ว +1

    you didnt assign the selfweight after changing the size of the mesh element to 0.5

  • @rmathew3595
    @rmathew3595 5 ปีที่แล้ว +1

    where is the design part? its only analysis ..

  • @PriyeshBalan-n1w
    @PriyeshBalan-n1w 9 หลายเดือนก่อน

    your not considered wind load here, may i know the reason

  • @rahmatturabi9408
    @rahmatturabi9408 7 ปีที่แล้ว

    could you plz show the result of slab with its detailing ?

    • @ppatil5376
      @ppatil5376 6 ปีที่แล้ว +1

      Rahmat Turabi may be in staadpro slab is not designrd as per as IS code

    • @vibhorshukla850
      @vibhorshukla850  3 ปีที่แล้ว

      Sure in next upcoming video I will discuss about it :)

    • @vibhorshukla850
      @vibhorshukla850  3 ปีที่แล้ว

      Detailing is not possible in Staad pro.

    • @vibhorshukla850
      @vibhorshukla850  3 ปีที่แล้ว

      @@ppatil5376 yes use BS 8007 code for Rcc Slabs.

  • @_Smart_Fusion
    @_Smart_Fusion 7 ปีที่แล้ว

    please give me the link to download this software. actually my Staadpro is showing INDIAN code is accepted. please share link on Google drive to download your software version.please will be helpful bro.

  • @premkumarpawar5817
    @premkumarpawar5817 7 ปีที่แล้ว

    i watch this video you have taken -3 GY plate load . how to calculate plate load for slab?

  • @sanchityadav9876
    @sanchityadav9876 7 ปีที่แล้ว

    assign selfweight again warning will go off

  • @kidsactivitiesmahiraverma5128
    @kidsactivitiesmahiraverma5128 7 ปีที่แล้ว

    sir please advance concrete design pr video banawo

    • @vibhorshukla850
      @vibhorshukla850  3 ปีที่แล้ว

      Okay I will try to make video soon on advanced concrete design .

  • @ahesanallikhan6738
    @ahesanallikhan6738 7 ปีที่แล้ว

    please give a note for it...

  • @venkulraina4283
    @venkulraina4283 5 ปีที่แล้ว

    Where is design part

  • @katikaveeresh3130
    @katikaveeresh3130 6 ปีที่แล้ว

    i need a software stadd pro v8 i you have haa

    • @vibhorshukla850
      @vibhorshukla850  3 ปีที่แล้ว

      You can download Staad pro by watching Staad pro video link.

  • @ajaypratap2956
    @ajaypratap2956 5 ปีที่แล้ว

    Slab rebar detailing also should be shown in tutorial video. Please share your contact no. I have to word with you regarding one project which I am designing currently.

    • @vibhorshukla850
      @vibhorshukla850  3 ปีที่แล้ว

      For more detailing you can use RCDC in conjunction with the staad pro file .