I love watching Jarvis, but Tim is so much better at breaking it down and really detailing the explanation of what he is doing. Extremely talented rider and teacher... rare combo.
May I provide a piece of insight from my experience practicing this technique...... When trying to raise the wheel up as high as Tim is doing in the video, beginners usually don’t keep the throttle open long enough to arc the wheel up quite high, so what ends up happening is the wheel gets up maybe 2 feet in the air for a brief moment before it falls down. The reluctance to keep the throttle open for long enough seems to come from the fear of falling back. The chances of you falling back when the bike is almost vertical are none. Even of you do fall back, it’s mostly harmless if you’re wearing protective gear.. Do not be afraid to keep the throttle open until the whee goes up high. Once you get a feel for how long the throttle needs to be open, you will be able to reflexively control throttle open time. Expect it to take a week or two for those reflexes to be developed.
great points! it's also okay to start small. practice getting the timing right and just go a foot or two and practice using the rear brake to bring the front down. Once using the rear brake is burned into your brain you will not fear going to the balance point as you know you will be safe as long as you are covering the brake pedal! Also because this is a slow technique you can simply step off the back if you go too far too fast, that's why standing is safer at first.
I'm so glad he's on the 350... I have one and I have a lot of consistency issues getting the front end up. Seeing how easily he does it on my same bike proves that the bike is very capable, and I just need to keep practicing. It might sound stupid but this video is EXACTLY what I needed to see! Thank you!! And yes, I just subscribed 👍
It would have been amazing to see the footage of students trying it. Its one of the best ways to learn - from other peoples mistakes. There is a narrow 'correct' space but it is amazing the infinite ways learners get into trouble and make errors. Seeing these various errors is a gold mine for the master and the learner alike!
Key bit of info here is too pop the clutch on the down stroke of the suspension rather than trying to time it for the rebound. This one helped me break through to the next hurdle. What gear are you popping up in there Tim?
@@Papparratzi Correct! A common mistake is to try and catch the rebound with the clutch/throttle input but it happens too fast and you end up missing it. Just add in the clutch and throttle as soon as the bike is at the bottom of the travel. If you try and wait for it you are too late.
@@PrimalEnduro Hi, I'm back. It went very well considering my experience. The tip about going slow and pressing the front was very helpful, even when sitting. I'm at the point that I'm afraid of looping out, so I need to practice a lot my rear brake control. Thanks again :) (PD: sorry if I typed something wrong. English is not my native language. I'm from Uruguay)
Interesting. I've been trying to put in some practice with wheelies and pivot turns, and I've got the rear brake covered, but finding that balance is a hard task. I'll have to try the standing version and see how it feels next time. I'm thinking how every time I start a wheelie it's from a dead stop with my left foot down, and I'm quite short, and its VERY difficult to bring that foot up to the peg. I always end up doing 180°-360° pivot turns whilst repeatedly and rapidly dabbing the left foot. Good video though.👍
I have the same problem and I'm not very short @5'11" so it must be technique! Gotta go practice more and film it so I can see what I'm doing wrong. All of my seated slow wheelies turn into pivot turns!
Hi Tim, nice explanations. I struggle with the throttle... when the front wheel comes up and my body goes back, I hold the handlebar and my hand add too much throttle and the bike loops. How do you hold your body without adding gas ?
Thank you this helped a lot I was way over doing my RPM and bringing it up way too fast it made it harder to catch with the rear brake but I figured out the lower RPM takeoff I'm able to do my slow wheelies cuz I'm not over rotating too quickly thanks you so much
I would really like to see a short video segment talking about best practices for wheelie on a motorbike that is direct drive (no clutch) like the Zero Motorcycles FX, Alta Motors Redshift, Luna Cycles Sur Ron X, or KTM Freeride E-XC. All the same this is good information but there are few examples of technical riding on electrics.
I would think it would be similar using the suspension, the only difference is there is no clutch, so you get what you get with the throttle. However, my understanding is electric motors deliver torque very quickly so it might even be better! sort of "Electric Smooth"...LOL
With the Zero FX I had to train myself to put my hand a little further on the right handle than normal, forcing me to turn the right handle faster then normal
@@devinhood7340 not sure what you are asking? I think people tend to get too hung up on setting up the bike to perform a certain way when it's really just the technique used by the rider more than any bike setup. At least with these slow speed techniques.
@@devinhood7340 Primal meant (I assume) ..that the fork springs are a/the 2nd option higher of spring rate rated springs, available to be used for its particular stock OEM fitment of telescopic forks.
@@razor1uk610 I think he meant on the adjuster atop the forks if it was adjusted 2 clicks softer, which I believe iis the dampening but I can't remember
Can you do this technique without using the front brake? Also when you compress the forks do you release the front brake right after while giving throttle? Like using the front brake and throttle at the same time or hand off brake followed by throttle? Thanks.
The front brake is only use to initiate the compression of the fork. You can let go before it rebounds. you don't need to use the brake, but it's just easier and helps with the weight transition.
Do you think an auto clutch holds a person's development of riding skill back? I think I got better after I stopped using an auto clutch. Plus how do you double blip a log on the auto?
I was a long time Auto clutch fan and still think they have their place. When I decided I wanted to learn some trials techniques it was obvious I needed the manual clutch. I've ditched the auto and am so much happier with my progress. You really need the precise control of the manual to master these techniques. The auto just gets in the way...you are trying to do your thing and it's trying to do it's.
Unfortunately there are some videos on youtube that tell you to weight the forks to help pop up the wheel. This video obviously teaches the right way which is to compress on the pegs. If you try to compress the forks you will be leaning too far forward to be able to easily lift up the front wheel.
This video shows the technique for the standing slow wheelie. We practiced this method first because as you approach an obstacle most of the time you will be standing. For seated slow wheelies the front brake method works better since you can't really compress from the pegs.
Lets see if i can get my DR650 up with this method... im pretty confident. My DR has a weird balance point though... comes really late. Also i need to drain my tank before since with the full 5.3 gal tank its not even power wheeling in first and clutching it up is difficult because there is so much weight so high located
Hi PrimalEnduro, this is really helpful and thank you for posting it. I have one question, though. My 150cc 2-stroke doesn't seem strong enough to bring the front up if I use the clutch and throttle together from the idle. Do you think the engine should be strong enough as long as the timing is right? It's amazing to see that Tim was hardly using any rpms...
The one thing not mentioned in the explanation is how quickly and fully you shift your weight to the back of the bike immediately as you’re rebounding.
Maybe adjust your idle up a bit to keep it from pop stalling. I haven't ridden a motox four stroke in some time, but even Tim pop stalled the KTM a few times getting used to it. Maybe a flywheel weight would help?
Having a hard time with my KTMXCF without giving it too much throttle on the torque pulls too hard and it seems like you’re giving almost nothing. Does it matter your suspension settings currently I have mine set to soft on front and rear should I make them more stiff?
suspension is fine soft. You want to give it just a little bit of gas with the clutch slipping right at the biting point. Then compress the front suspension by moving your weight forward by flexing(bending) your legs so your whole body moves forward (not just your chest and shoulders) then as you "unflex" and move back and as the suspension starts to rebound just give a small blip of throttle and clutch. It really take very little throttle to get the front end up. Most people think it takes a lot but it's more about body movement and timing. I hope this helps.
Can it be done on underpowered bikes (see 125cc 4 stroke for example)? I have found I can pop the front if I use a kicker, but actually lifting the front is really difficult for me.
Certainly! This technique relies on body positioning and weighting/un-weighting the suspension much more than bike power. If you watch Tim, He first weights the suspension and then catches the rebound with just a little bit of throttle and clutch while he shifts his weight up and back to assist the front end coming up. Practice and you will see it's not the power of the bike at all.
PrimalEnduro thank you!!! I'll try it tomorrow. Sadly my bike's suspension is quite hard, so compressing the front is also a bit more difficult, but I've seen my friend do it, so it's definitely not impossible!
@@riveraluciano One trick that helps is to apply throttle/release clutch just as the suspension reach full downward travel. If you try to wait for the rebound you will miss it and the throttle will just cause the wheel to spin. I just uploaded a video of Graham Jarvis demonstrating this technique as well.
Yes, very little throttle and weighting the rear for traction , then spring up/back on the rebound (as soon as the suspension reaches full compression) spring up/back. with the body movement you won't need much throttle.
@Shlutty Mc'Shlutface exactly, the main thing is weighting the suspension so it store and releases the energy to rebound. Then with your body unweight the suspension and lean back while giving just a little blip of throttle to help. It's the combination of these 3 things at the right time that makes it easy! A common mistake is to add the blip of throttle too late, so as soon as the suspension goes down ad the blip of throttle as you spring up and back. Practice, Practice, Practice and you will get it!
At the same time feed in just a little bit of throttle as you release the clutch lever, you don't need much! Do this just as you complete the downstroke of the fork so it catches the rebound stroke up.
@@user-np6wq1tx9c practice getting the front wheel up just a bit and using the rear brake to bring it down. Practice this until you don't have to think about it and it just happens..Then and only then you are ready for 12 oclock wheelies!
I like standing better because I have a bad habit of not covering the rear brake so it's easy to step off. before I'm buying yet another rear fender...LOL
@@PrimalEnduro Hahaha yes I know the feeling. I learned sitting down on a four stroke 450 an then tried the same clutch, front brake throttle on a 300xc 2 stroke an that 2 stroke put me right on my back like a pancake being flipped. Broke all the plastic, fender, seat ripped off, an side plastic. Two stroke hit combined with whiskey throttle. I invested in a wheelie guard an it's saving me money in the long run. Lol
@@emburgess7186 I think it would be pretty hard to work the clutch and left hand rear brake at the same time which is needed with this technique. Maybe with something a bit more complicated such as the Clake Two? Probably better to train yourself to use the foot brake just like the Pro's. It just takes practice to build the muscle memory.
Beta USA wouldn't help our local dealer out with a demo bike for Tim, but the shop was still nice enough to loan him a brand new KTM. He would have prefered a Beta for sure!
just not for this class, he's riding a borrowed KTM from our local dealer, there were no Beta's available for loan...He can ride anything like a beast!
LOL, I'm living proof that it can be done on a two stroke and I have no where near the talent of Tim! I little bike setup and clutch/throttle control goes a long way. With the slow wheelie it's more about body positioning to weight and deweight the front end than it is about what kind of power the bike makes. Tim typically rides a two stroke, but for this trip he was on a borrowed 350exc.
@PrimalEnduro Excellent instructional Vid...Learning the correct way is PRICELESS ! Thx
What's even better is getting trained directly by Tim. The instant correction you get from him is PRICELESS!
... and while having so impressive skills, he is a very nice - humble - guy
@@frogzie Incredibly so! What a blast it was to hang out and ride with him for 2 weeks! Can't wait until next year!
I think this is the best video online explaining how to start wheeling.
Tim Coleman defiantly knows how to explain.
Yes, he does a great job explaining and then also demonstrating!
I love watching Jarvis, but Tim is so much better at breaking it down and really detailing the explanation of what he is doing. Extremely talented rider and teacher... rare combo.
Yeah I was thinking the same thing man.
May I provide a piece of insight from my experience practicing this technique......
When trying to raise the wheel up as high as Tim is doing in the video, beginners usually don’t keep the throttle open long enough to arc the wheel up quite high, so what ends up happening is the wheel gets up maybe 2 feet in the air for a brief moment before it falls down.
The reluctance to keep the throttle open for long enough seems to come from the fear of falling back.
The chances of you falling back when the bike is almost vertical are none.
Even of you do fall back, it’s mostly harmless if you’re wearing protective gear..
Do not be afraid to keep the throttle open until the whee goes up high.
Once you get a feel for how long the throttle needs to be open, you will be able to reflexively control throttle open time. Expect it to take a week or two for those reflexes to be developed.
great points! it's also okay to start small. practice getting the timing right and just go a foot or two and practice using the rear brake to bring the front down. Once using the rear brake is burned into your brain you will not fear going to the balance point as you know you will be safe as long as you are covering the brake pedal! Also because this is a slow technique you can simply step off the back if you go too far too fast, that's why standing is safer at first.
Perfect examples of what you're describing start at 7:25.
Good stuff! Going to practice slow wheelies this weekend, thanks y’all!
The best wheelie video I've seen
I'm so glad he's on the 350... I have one and I have a lot of consistency issues getting the front end up. Seeing how easily he does it on my same bike proves that the bike is very capable, and I just need to keep practicing. It might sound stupid but this video is EXACTLY what I needed to see! Thank you!!
And yes, I just subscribed 👍
Almost always the rider more than the bike! The 350 is a very capable bike.
It would have been amazing to see the footage of students trying it. Its one of the best ways to learn - from other peoples mistakes. There is a narrow 'correct' space but it is amazing the infinite ways learners get into trouble and make errors. Seeing these various errors is a gold mine for the master and the learner alike!
Key bit of info here is too pop the clutch on the down stroke of the suspension rather than trying to time it for the rebound. This one helped me break through to the next hurdle. What gear are you popping up in there Tim?
1st gear
@@PrimalEnduro Thanks
Excellent instruction. Loved the convo about clutch release timing
Thanks for sharing the knowledge of how you do this-hopefully so can I!
Practice makes Perfect!
Wow, this is fabulous. Maybe this old man can finally learn to wheelie!
I'm old too! If I can do it, You can do it!
Seeing is believing.
So much clearer now that I’ve seen this.
My new goal is to master using the clutch instead of the throttle.
The clutch controls the bike way more than the throttle!
PrimalEnduro I guess you’re just slightly slipping the clutch with low revs and releasing just as the suspension is rebounding?
@@Papparratzi Correct! A common mistake is to try and catch the rebound with the clutch/throttle input but it happens too fast and you end up missing it. Just add in the clutch and throttle as soon as the bike is at the bottom of the travel. If you try and wait for it you are too late.
Wonderful videos! Thanks for sharing and helping! I'm going to try this today 👌🏻
Post your results! Thanks for watching!
@@PrimalEnduro Hi, I'm back. It went very well considering my experience. The tip about going slow and pressing the front was very helpful, even when sitting. I'm at the point that I'm afraid of looping out, so I need to practice a lot my rear brake control. Thanks again :) (PD: sorry if I typed something wrong. English is not my native language. I'm from Uruguay)
Great tips, thanks. Awesome coaching.
Tim is the best at explaining the techniques. Thanks for watching!
awesome vid. I realize now that I've been using too much throttle for my slow wheelies
cool, it doesn't take much!
That’s awesome
I need a lot more time and training on my new kx250 four stroke !
Thanks your videos are amazing
Cheers
Glad you enjoyed it.
Interesting. I've been trying to put in some practice with wheelies and pivot turns, and I've got the rear brake covered, but finding that balance is a hard task. I'll have to try the standing version and see how it feels next time.
I'm thinking how every time I start a wheelie it's from a dead stop with my left foot down, and I'm quite short, and its VERY difficult to bring that foot up to the peg. I always end up doing 180°-360° pivot turns whilst repeatedly and rapidly dabbing the left foot. Good video though.👍
I have the same problem and I'm not very short @5'11" so it must be technique! Gotta go practice more and film it so I can see what I'm doing wrong. All of my seated slow wheelies turn into pivot turns!
Hi Tim, nice explanations.
I struggle with the throttle... when the front wheel comes up and my body goes back, I hold the handlebar and my hand add too much throttle and the bike loops.
How do you hold your body without adding gas ?
My Country flag is on your shirt!😍😍😍Thanks you so much
Thank you this helped a lot I was way over doing my RPM and bringing it up way too fast it made it harder to catch with the rear brake but I figured out the lower RPM takeoff I'm able to do my slow wheelies cuz I'm not over rotating too quickly thanks you so much
often times less is more! More important to use the suspension than throttle!
Thanks for the vid Guys, so good to hear Tim explain it All.
He has a great way of explaining the technique and then demonstrating it! The two qualities that make a great teacher! Thanks for watching
Makes it look so easy
I think he's practiced a bit!
Cheers man, I watch these videos hoping for an easy way.... nope they're still hard as hell to do properly!
The secret is: There is no secret! Practice makes Perfect, but proper technique makes that process much smoother! Thanks for watching.
I would really like to see a short video segment talking about best practices for wheelie on a motorbike that is direct drive (no clutch) like the Zero Motorcycles FX, Alta Motors Redshift, Luna Cycles Sur Ron X, or KTM Freeride E-XC. All the same this is good information but there are few examples of technical riding on electrics.
I would think it would be similar using the suspension, the only difference is there is no clutch, so you get what you get with the throttle. However, my understanding is electric motors deliver torque very quickly so it might even be better! sort of "Electric Smooth"...LOL
With the Zero FX I had to train myself to put my hand a little further on the right handle than normal, forcing me to turn the right handle faster then normal
I am definitely a dummy so this video is really good for me.
Since you were smart enough to watch this video you can't be a complete dummy!😆
Really nice video master!
Great video thanks a lot
His suspension looks really soft. I'm sure that helps to compress the suspension.
Just for reference: That bike was bone stock brand new with the exception to 2 rates higher fork springs. I believe .46's
@@PrimalEnduro 2 Click's out ?
@@devinhood7340 not sure what you are asking? I think people tend to get too hung up on setting up the bike to perform a certain way when it's really just the technique used by the rider more than any bike setup. At least with these slow speed techniques.
@@devinhood7340
Primal meant (I assume) ..that the fork springs are a/the 2nd option higher of spring rate rated springs, available to be used for its particular stock OEM fitment of telescopic forks.
@@razor1uk610 I think he meant on the adjuster atop the forks if it was adjusted 2 clicks softer, which I believe iis the dampening but I can't remember
Thanks a lot , great explanations😉
Wow, so good explanation.
Tim has a great way of explaining the technique and then demonstrating exactly how it works! What a great teacher!
Primo Great info for myself and my son Great Thx..
Can you do this technique without using the front brake? Also when you compress the forks do you release the front brake right after while giving throttle? Like using the front brake and throttle at the same time or hand off brake followed by throttle? Thanks.
The front brake is only use to initiate the compression of the fork. You can let go before it rebounds. you don't need to use the brake, but it's just easier and helps with the weight transition.
Do you think an auto clutch holds a person's development of riding skill back? I think I got better after I stopped using an auto clutch. Plus how do you double blip a log on the auto?
I was a long time Auto clutch fan and still think they have their place. When I decided I wanted to learn some trials techniques it was obvious I needed the manual clutch. I've ditched the auto and am so much happier with my progress. You really need the precise control of the manual to master these techniques. The auto just gets in the way...you are trying to do your thing and it's trying to do it's.
Unfortunately there are some videos on youtube that tell you to weight the forks to help pop up the wheel.
This video obviously teaches the right way which is to compress on the pegs.
If you try to compress the forks you will be leaning too far forward to be able to easily lift up the front wheel.
This video shows the technique for the standing slow wheelie. We practiced this method first because as you approach an obstacle most of the time you will be standing. For seated slow wheelies the front brake method works better since you can't really compress from the pegs.
Not to be a dick, but its the same thing. Waiting the suspension is the key while standing or sitting. Hope that helps
Hold on now, you can't do that kinda stuff on a 4 stroke! Lol Nice video Tim, I enjoyed it, thanks. I'm going out and practice this tomorrow.
95% rider 5% bike! But you knew that!😄
Lets see if i can get my DR650 up with this method... im pretty confident. My DR has a weird balance point though... comes really late. Also i need to drain my tank before since with the full 5.3 gal tank its not even power wheeling in first and clutching it up is difficult because there is so much weight so high located
No experience myself with the DR, But Barry over at Cross Training Enduro can do some nice wheelies on the big girl!
Another great vid- love your channel!.
Thanks so much. Glad you are enjoying the vids!
Hi PrimalEnduro, this is really helpful and thank you for posting it. I have one question, though. My 150cc 2-stroke doesn't seem strong enough to bring the front up if I use the clutch and throttle together from the idle. Do you think the engine should be strong enough as long as the timing is right? It's amazing to see that Tim was hardly using any rpms...
The one thing not mentioned in the explanation is how quickly and fully you shift your weight to the back of the bike immediately as you’re rebounding.
Ótimos vídeos, obrigado. Very good, thank you
Do you think this works on a 4 stroke motocross bike too? I think on this low rpms my crf will pop off(hope this is OK my English is not the best) 🤔
Maybe adjust your idle up a bit to keep it from pop stalling. I haven't ridden a motox four stroke in some time, but even Tim pop stalled the KTM a few times getting used to it. Maybe a flywheel weight would help?
i see you have a cambodia jersey i did a dirt bike tour in siem reap was fun but hard in the deep sand
Tim is sponsored by the Cambodia Tour company!
Having a hard time with my KTMXCF without giving it too much throttle on the torque pulls too hard and it seems like you’re giving almost nothing. Does it matter your suspension settings currently I have mine set to soft on front and rear should I make them more stiff?
suspension is fine soft. You want to give it just a little bit of gas with the clutch slipping right at the biting point. Then compress the front suspension by moving your weight forward by flexing(bending) your legs so your whole body moves forward (not just your chest and shoulders) then as you "unflex" and move back and as the suspension starts to rebound just give a small blip of throttle and clutch. It really take very little throttle to get the front end up. Most people think it takes a lot but it's more about body movement and timing. I hope this helps.
Can it be done on underpowered bikes (see 125cc 4 stroke for example)? I have found I can pop the front if I use a kicker, but actually lifting the front is really difficult for me.
Certainly! This technique relies on body positioning and weighting/un-weighting the suspension much more than bike power. If you watch Tim, He first weights the suspension and then catches the rebound with just a little bit of throttle and clutch while he shifts his weight up and back to assist the front end coming up. Practice and you will see it's not the power of the bike at all.
PrimalEnduro thank you!!! I'll try it tomorrow. Sadly my bike's suspension is quite hard, so compressing the front is also a bit more difficult, but I've seen my friend do it, so it's definitely not impossible!
@@riveraluciano One trick that helps is to apply throttle/release clutch just as the suspension reach full downward travel. If you try to wait for the rebound you will miss it and the throttle will just cause the wheel to spin. I just uploaded a video of Graham Jarvis demonstrating this technique as well.
th-cam.com/video/LX-WMnO_C9g/w-d-xo.html
Nice video. On the rebound he moves his body back.. he didn't mention that. Also that low RPM 🤔 I need to try that!
Yes, very little throttle and weighting the rear for traction , then spring up/back on the rebound (as soon as the suspension reaches full compression) spring up/back. with the body movement you won't need much throttle.
@@PrimalEnduro excellent. Hopefully get to try this soon. Also happy to see a 4T being used.. so it's definitely the rider and not the bike 😕😜
@@kiwi-moto We tried to handicap him with a heavy thumper....it didn't work!
What actually pops-up the bike? Your body position or the engine? After You release the clutch how do You change your body position and stance?
@Shlutty Mc'Shlutface Thanks but that answer is just a common words an it does not help. I wanted the author to explain exactly how he feels it
@Shlutty Mc'Shlutface exactly, the main thing is weighting the suspension so it store and releases the energy to rebound. Then with your body unweight the suspension and lean back while giving just a little blip of throttle to help. It's the combination of these 3 things at the right time that makes it easy! A common mistake is to add the blip of throttle too late, so as soon as the suspension goes down ad the blip of throttle as you spring up and back. Practice, Practice, Practice and you will get it!
Which gear would be best on a newer yz450?
This is a slow movement, so 1st gear for sure.
What is the you are running
on gearing you are running I am am at 12 front 53;rear
Cheers from Cambodia!
Do you give it gas before you let go of clutch, or same time you let go of clutch?
At the same time feed in just a little bit of throttle as you release the clutch lever, you don't need much! Do this just as you complete the downstroke of the fork so it catches the rebound stroke up.
Wish I had that much control
This was 1st gear?
Yes sir
How do you not fall backwards???!!!
And why are the students wearing backpacks?
Love from USA!
Rear brake keeps you from going over backwards and you should always train in whatever you are going to wear when you ride.
@@PrimalEnduro So cool! I just started riding and love it.
Thank you for answering ✌
@@user-np6wq1tx9c practice getting the front wheel up just a bit and using the rear brake to bring it down. Practice this until you don't have to think about it and it just happens..Then and only then you are ready for 12 oclock wheelies!
Awesome stuff. I started learning sitting down an standing feels so screwed up now...
I like standing better because I have a bad habit of not covering the rear brake so it's easy to step off. before I'm buying yet another rear fender...LOL
@@PrimalEnduro Hahaha yes I know the feeling. I learned sitting down on a four stroke 450 an then tried the same clutch, front brake throttle on a 300xc 2 stroke an that 2 stroke put me right on my back like a pancake being flipped. Broke all the plastic, fender, seat ripped off, an side plastic. Two stroke hit combined with whiskey throttle. I invested in a wheelie guard an it's saving me money in the long run. Lol
@@emburgess7186 LOL, the wheelie guard resides under you right foot.....I just never remember!
@@PrimalEnduro I wonder if putting a rear hand brake on the bars like a lot of supermotos do, if that's a better way???
@@emburgess7186 I think it would be pretty hard to work the clutch and left hand rear brake at the same time which is needed with this technique. Maybe with something a bit more complicated such as the Clake Two? Probably better to train yourself to use the foot brake just like the Pro's. It just takes practice to build the muscle memory.
what gear is he doing this in
1st gear.
Thanks ！
you are welcome!
So many great riders coming out of Australia these days.... are you guys born with helmets on or something?!
Can't do that sort of wheelie with a 50cc 110kg Yamaha dt:D
I can do it on my Yamaha Chappy?
Tim on a KTM?
Beta USA wouldn't help our local dealer out with a demo bike for Tim, but the shop was still nice enough to loan him a brand new KTM. He would have prefered a Beta for sure!
finally a good wheelie tutorial without a bunch of useless talking
Question : what ktm you have ?
I'm on a Beta 200rr
PrimalEnduro that beta ?
PrimalEnduro i mean this bike on the video that beta ?
@@speedy_blondy Tim's bike in the video is a borrowed KTM 350 EXC.
PrimalEnduro thank you
iv been riding bikes my whole life and this guy is atleast 100 x better than me
You're not alone!
Ive been thrashing bikes for 42 years and i still cant do wheelies on command, ive got this inbuilt traction control thing!
Heck yeah.
I saw my flag, Cambodia 🇰🇭, on his shirt
Cambodia motor tours is a sponsor of Tim!
Suspension looks really soft...
it's a bone stock 350 EXC with 2 rates heavier on the front springs.
Susbtitulos en español plase...
Cover that break dudes
Cover the "brake" ....."break" is what happens to your rear fender if you don't!😄
Top
After my last race I just want to stay on top of my bike not the other way around.
Wasn't that always the goal?
Seria super si estubiera en español
Sorry, maybe someone can do the translation for subtitles?
@@PrimalEnduro son buenos tus videos saludes gracias por responder mi comentario
@@denilsoncruz4055 Thanks for watching!
I guess he’s not on Beta anymore
just not for this class, he's riding a borrowed KTM from our local dealer, there were no Beta's available for loan...He can ride anything like a beast!
Rip fork seals
I think they can handle it! LOL
practice going UpHill makes easier to learn
I learn everything the wrong way..........it’s just how I roll
There's the right way, the wrong way, and the Primal Enduro way (which is the same as the wrong way, only faster!)
Try that shit on a two stroke from a stand still. Aint happening.
LOL, I'm living proof that it can be done on a two stroke and I have no where near the talent of Tim! I little bike setup and clutch/throttle control goes a long way. With the slow wheelie it's more about body positioning to weight and deweight the front end than it is about what kind of power the bike makes. Tim typically rides a two stroke, but for this trip he was on a borrowed 350exc.
So scawie