This isn’t non-stop. When the water runs out in one bottle, you have to turn it upside down to refill and then prime again. At that point it has stopped!
According to the 6:14 diagram, the liquid is flowing on the blue tube to the bottom recipient. Here, in the bottom recipient, the pressure is increasing and the air (!) is going through yellow tube to the top recipient. Here, again, the pressure is increasing and the liquid is sending up through the green tube. I didn't test it but what if the bottom recipient is filled with liquid, no air remaining? Through the yellow tube is going up, to the top recipient not air (!) but liquid, so the top recipient will always have liquid? I guess this would be perpetuum mobile - first grade ..... The liquid flowing through the blue tube will be equal with liquid from green+yellow tube ....
Автор ролика просто прикалывается, молодец. Но, сколько же глупцов верящих в этот "вечный движок" . Вода из верхней секции перестанет литься пока воздушная масса будет поступать в среднюю секцию. А поступать будет только если вода льется в нижнюю секцию, где и остается наполняя секцию.
Well now that you but made a little water fountain why don't you go big turn create a waterfall to power a hydro generator to produce electricity if you can do that with the little you can go big.
@Adi Zete Ah yes I am glad at least it worked for a few mins cause whenever I try to do something it doesn't go as expected but this time I did something nice and didn't make my whole room a mess.....I AM PROUD OF MYSELF😌🤣
In Russia, it is called "Паяльник" (soldering iron). In Europe and USA, it can be referred to as "Soldering iron", "Soldering tool", "Soldering kit". However, it is not meant to burn plastic bottles. It has a different purpose. But it is also possible to burn a plastic bottle with it.
Super spannendes Video, wenn man Zeit hat und sonst nix zu tun hat. Nur eine kurze Frage so nebenbei, was passiert wenn die untere Flasche voll gefüllt ist, dann die obere Flasche, und dann die Flüssigkeit bis zum Trichter voll ist. Was kommt aus dem grünen Röhrchen raus?
if bottle is placed standing like:🚦 and if the bottle is big enough and the amount water is right and placing a bendy straw at the bottom and other part of bendy straw at top over bottle , this can work forever as long as there is no water leaking....if the straw is too long in other words holding more water than a shorter straw would , this might not work , also if the straw is too wide in other words , holding too much water , this might not work , because of gravity , you would have to pour in alot more water *[ also you can put stuff which is heavy but never sinks on top of water to help create even more pressure so water in straw is more likely to be pushed up ]*
Диаметр трубочек рояли не играет. Давление определяется только высотой столба воды. Ну или ртутного столба - все равно. Эта машинерия работать не будет.
The higher the water level, the stronger the pressure. I tried with smaller bottles it works worse. The larger the bottle, the stronger the pressure! And the diameter of the tubes that inside should be larger than the one at the exit from above.
@@CrazyBlackHacks Can you explain about the diameter of the tubes that inside should be larger than the one at the exit from above? And also size for each bottle must be the same for one prototype?
@@batrisyiabalqis2718 That system is pretty easy. When you fill water into the top, it flows through the blue tube, filling the lower bottle. When it is filled the whole system is turned around to fill the upper bottle leaving a rest, so the air cannot escape. If you turn it back again, the water can't flow back because the lower bottle is filled with air and some water. If you now fill in more water, the air pushes up water through the green pipe, which then flows back into the lower bottle. When the lower bottle is filled up, you actually have to get rid of the water in that bottle to restart the system. Keep all of that in mind, and you can build a similar fountain however you want
@@spidercat8262ummmmm yeah..... After writing this comment I realized that I don't need that because it's not the thing that reacts on air or any effect... By the way thank you
This is ancient Greek tech, it's called heron's fountain. Once the middle bottle fully empties in the bottom bottle the fountain will stop and will need to be reloaded by turning it upside down.
@@CrazyBlackHacks Acredito também que a funcionabilidade do movimento isso seria mais a ajuda necessária para o AR dentro das garrafas para empurrar a circulação da água.
Yeah I was figuring it out and coming to the comments to see what was up. The middle bottle would eventually run out and the bottom bottle would become full. Correct me if I'm wrong.
Правило на скачените съдове се нарича във физиката,а в бившия Източния блок всеки ученик с успех над Добър-4 го е чувал,а и водопроводчиците.Уникална идея и за домът.Познават го и шофьори и някой трафиканти на гориво.Важно е горната точка да се изравни и обезвъздуши.
Да аз съм дипломиран историк от ВТУ,,Св.Кирил и Методий",не уча ,а съм я изучил.Автор също,аз ги уча не те мен,учител съм.Но тази материя е между физика,химия и естествознание не е история.
This isn’t non-stop. When the water runs out in one bottle, you have to turn it upside down to refill and then prime again. At that point it has stopped!
You say everything correctly, you need to turn it over all the time.
@@CrazyBlackHacks ...
Nice idea
@@CrazyBlackHacks still very good and doable
According to the 6:14 diagram, the liquid is flowing on the blue tube to the bottom recipient. Here, in the bottom recipient, the pressure is increasing and the air (!) is going through yellow tube to the top recipient. Here, again, the pressure is increasing and the liquid is sending up through the green tube.
I didn't test it but what if the bottom recipient is filled with liquid, no air remaining? Through the yellow tube is going up, to the top recipient not air (!) but liquid, so the top recipient will always have liquid?
I guess this would be perpetuum mobile - first grade .....
The liquid flowing through the blue tube will be equal with liquid from green+yellow tube ....
@@CrazyBlackHacks Otherwise it would be perpetual motion!
Автор ролика просто прикалывается, молодец. Но, сколько же глупцов верящих в этот "вечный движок" . Вода из верхней секции перестанет литься пока воздушная масса будет поступать в среднюю секцию. А поступать будет только если вода льется в нижнюю секцию, где и остается наполняя секцию.
Laxmhinarayan
Не гони, всё работает. Вечным это не будет, потому, что вода имеет свойство испаряться. Воду придётся доливать.
شكرا جزيلا من الجزائر 🇩🇿
Very very good work 🎉🎉🎉
Good man👍
PERFEKT ❤❤🎉🎉🎉🎉
Well now that you but made a little water fountain why don't you go big turn create a waterfall to power a hydro generator to produce electricity if you can do that with the little you can go big.
Exelente demostración ,muy sencilla y eficaz
😢😢😢😢😢😢😢😢😢😢😢😢😢
Super.....
Thank you, I am very pleased
Wow
Good nice 👍
It's great good luck 🔔
Thank you, very nice!
When one bottle water will end then fountain will also stop then What is the benefit to prepare such type of fountain after hard struggle
Te quedó genial!
I tried it and it worked , subscribed 👍🏻💕
@Adi Zete Ah yes I am glad at least it worked for a few mins cause whenever I try to do something it doesn't go as expected but this time I did something nice and didn't make my whole room a mess.....I AM PROUD OF MYSELF😌🤣
@Jainab Siddiqui it worked for few days but after that straw broke so…I bought a new waterfall…
I love it. I would like to know where you got the tool to burn holes in the bottles? What's it called and where you can buy it. 😊
It’s called a sodering iron
@@stephenc8596 thanks.
Можешь взять обычный гвоздь, нагреть его газовой горелкой и прожечь им бутылку
Не думай это прикол. Не будет постоянно лится
In Russia, it is called "Паяльник" (soldering iron). In Europe and USA, it can be referred to as "Soldering iron", "Soldering tool", "Soldering kit". However, it is not meant to burn plastic bottles. It has a different purpose. But it is also possible to burn a plastic bottle with it.
That's good idea 💪
Cool 😎
Thank friend
Super spannendes Video, wenn man Zeit hat und sonst nix zu tun hat.
Nur eine kurze Frage so nebenbei, was passiert wenn die untere Flasche voll
gefüllt ist, dann die obere Flasche, und dann die Flüssigkeit bis zum Trichter voll ist.
Was kommt aus dem grünen Röhrchen raus?
nunca. pues la misma q. cae vuelve y sube
En cuanto se le termine la presión a la botella inferior el mecanismo se para
Hola y que se puede hacer para mantener la presión ?. Gracias y BENDICIONES 🙏
Este ,,non stop" pentru 10 secunde ! Avem un măscărici care vrea să pară magician .
@@yeetyboi3331Подкачивать насосом
These aren’t “non stop” They stop as soon as the water siphons down. It’s a simple siphon nothing more.
Bonjour... combien de temps dure le fonctionnement de la fontaine pour l'écoulement du liquide ?
Herhangi bir arıza olmazsa sonsuza dek gider😂
Galing
Show!
Bom, bom, bom demais.
Parabéns!
Inscritos.
Chia sẻ video quá tuyệt vời.đồng cùng bạn nhé.❤👍🎁🔔
Thank you 😊
It's very beautiful first time fale seconde time sucsus
It realy asome
Cuanto tiempo dura este movimientos del agua
Hasta que se vacía la botella superior. Luego vuelves a hacer lo del minuto 7:16
@@JULIA05111971 Tiene logica si no. No vuelve a funcionar 💪
What's its aim & use ?
Super Bro 😎😎😎
I tried this experiment bit it is not at all non stop. But very good that you make it 👌👌😊
Very very good. I like your style and artistry
Hello, let's get to know each other
Ruchi... Is real bro..
Me encantó muchas gracias por, enseñar a hacerlo, desde Colombia
Legal gostei 👍👍👍👍
Excellent I appreciate you but it is fake (not working)
Yeahhh its not working . .wasted time
Bro it's not fake. It might be air tight
@@monkeyking8841 de lo no mi
@HE3A yes
@XXxtentacion fan skill issue fr
It will work for any bottle
No
The larger the bottle, the better the fountain works.
Show them potential difference over energy⚡ expenditure and after how much time⌚ it's become profitable.???
if bottle is placed standing like:🚦 and if the bottle is big enough and the amount water is right and placing a bendy straw at the bottom and other part of bendy straw at top over bottle , this can work forever as long as there is no water leaking....if the straw is too long in other words holding more water than a shorter straw would , this might not work , also if the straw is too wide in other words , holding too much water , this might not work , because of gravity , you would have to pour in alot more water
*[ also you can put stuff which is heavy but never sinks on top of water to help create even more pressure so water in straw is more likely to be pushed up ]*
Super
Thank you, very nice
так же можно сделать и с 2-х литровой баклашкой,а горловину поставить от 5-ти литровки,и запустить туда рыбок,вот вам и мини аквариум👍
olaaa ta bonito el experimento lo voy hacer
Самое главное не освещено!диаметр трубочек -----разный должен быть.это самое главное.
Диаметр трубочек рояли не играет. Давление определяется только высотой столба воды. Ну или ртутного столба - все равно. Эта машинерия работать не будет.
super
that is good idea
Can you explain how it works regarding with its pressures, the height of the water or etc
The higher the water level, the stronger the pressure. I tried with smaller bottles it works worse. The larger the bottle, the stronger the pressure! And the diameter of the tubes that inside should be larger than the one at the exit from above.
@@CrazyBlackHacks Can you explain about the diameter of the tubes that inside should be larger than the one at the exit from above? And also size for each bottle must be the same for one prototype?
@@batrisyiabalqis2718 That system is pretty easy. When you fill water into the top, it flows through the blue tube, filling the lower bottle. When it is filled the whole system is turned around to fill the upper bottle leaving a rest, so the air cannot escape. If you turn it back again, the water can't flow back because the lower bottle is filled with air and some water. If you now fill in more water, the air pushes up water through the green pipe, which then flows back into the lower bottle.
When the lower bottle is filled up, you actually have to get rid of the water in that bottle to restart the system.
Keep all of that in mind, and you can build a similar fountain however you want
Wath Dave hax
@@CrazyBlackHacks Good
Fantastic bro
Hallo: Läuft das Wasser immer im Kreis. Oder hört es auf zu fließen, wenn bei der oberen Flasche kein Wasser mehr trinken ist?
👍👍👍👍👍👍
how to stick the straw?
what's the gum used?
muito bom gostei parabéns
Con este experimento se utiliza la ley de Boyle
Muy lindo como le llaman a la máquina caliente para abrir los agujeros gracias
Pistola de silicon
Cautin
Do I need that gaps between the two bottles where you used two bottle caps...or I can skip that gap?
So long as you can keep the bottles stable, you don't need that gap
@@spidercat8262ummmmm yeah..... After writing this comment I realized that I don't need that because it's not the thing that reacts on air or any effect... By the way thank you
@@rubayethassan5615 lol, np
It isn't NON STOP as you have to keep priming it. You liiiieeerrrrr
Brother I made the same, but the water is not working pls tell some tips
Hay bạn ơi
Nice popel
FANTASTIC AND BEAUTIFUL THANKS 😊👍🆗
But it flows continuously??
Thank u saranghae 💜
Excellent, Thanks
Que es lo que le echas, funciona con agua? Y el silicon no puede ser frío? O solo funciona con caliente? Por favor respondeme!!! 🥺
Muy bueno. Super.
Is it ordinary water or any other liquid
quantos volts é a bomba dágua ?
Keep it up😃😃😃
compressed air....work.
The fountain stops after after several minutes.
I was suspicious my self because energy doesn't work like that
It willll Stoppp
how much minute?
This is ancient Greek tech, it's called heron's fountain. Once the middle bottle fully empties in the bottom bottle the fountain will stop and will need to be reloaded by turning it upside down.
That's because there's no such thing as perpetual motion
Очень доступно и просто. Спасибо.
huh
bruh
@@eazboi8141 Вообще то это ОНА-ДЕВУШКА,А НЕ БРАТАН🤣
Kanjuuu😂😂
It's fake I have tried it but failed very badly
Gostei muito. Gostaria de saber porque após colocar água é preciso dar uma virada de ponta cabeça para funcionar? por favor.
Esse projeto, se não for revertido, não funcionará.
@@CrazyBlackHacks Acredito também que a funcionabilidade do movimento isso seria mais a ajuda necessária para o AR dentro das garrafas para empurrar a circulação da água.
Круто
nice
Герон определённо был гением.
Problema que tem que virar por que a água encheu o litro debaixo não sobe mais pra cima
Классно
How much ML or Litre bottles we need? Plz reply me early
1000ml bottle
1000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000ML
@@Manveer724 🤣
Скажите пожалуйста вы что наливал, что за жидкость.
Это вода с синей краской для того что бы лучше было видно как она течет.
It use pepsi. How about water? Is it work?
Сына заинтересовала физика, спасибо
Супер.
Hola alguien me explica que debo hacer cdo deja de funcionar vertiendo el agua????!!!
Gracias
Deja de funcionar cuando la botella superior se vacía. Debes volver invertir las botellas, como se hace en el minuto 7:16
Heron fountains are not non-stop. When the top bottle has emptied itself into the bottom bottle the fountain stops.
How many times to fountain this
Don't let the title mislead you guys. This isn't non-stop.
Yeah I was figuring it out and coming to the comments to see what was up. The middle bottle would eventually run out and the bottom bottle would become full. Correct me if I'm wrong.
Фонтан Герона, или что бывает если пьёшь " палёнку" 😊
Works only until the liquid has run down. As per the original.
What is that blue coloured water 💧
Amazing
Disculpen, pero se acaba esa agua y hay que volverlo a voltear
funciona por quanto tempo +/-?
на 0-45 встает вопрос. а где же фольга)
спасибо за труды. видео шикарны.
De que pais eres crazi blak
здоровья вам
скажите какой КПД у фонтана герона ?
если емкость содержит 1литр. сколько воды вытекает в верхней точке ?
Точно меньше 1
@@CrazyBlackHacks
это понятно .
хотелось бы по подробней.
сколько вешать в граммах ❗❓
😁
it is not none stop . you must again charge it !
Правило на скачените съдове се нарича във физиката,а в бившия Източния блок всеки ученик с успех над Добър-4 го е чувал,а и водопроводчиците.Уникална идея и за домът.Познават го и шофьори и някой трафиканти на гориво.Важно е горната точка да се изравни и обезвъздуши.
Учиш ли история? Аз също се интересувам от тази тема, аз я уча в университета на NAU ERA чухте за това? th-cam.com/users/Perspectiva-info
Да аз съм дипломиран историк от ВТУ,,Св.Кирил и Методий",не уча ,а съм я изучил.Автор също,аз ги уча не те мен,учител съм.Но тази материя е между физика,химия и естествознание не е история.
@@CrazyBlackHacks Идеята ви е хубава за популяризиране просто държах да кажа,че се изучаваше принципът преди 35-40 г.в Източния блок.
Всичко е ясно. Ако искате да разберете историята, отидете на канала, който пуснах.
I will try this
great
Did u get
Why is the Wather blue?
Прям Архимед... Эврика)))
sympa