Thank for sharing how you made the hole, I was going to use a glue gun but the rhinestone applicator is perfect because I do have one and thanks a perfect hole. 😊
Thank you you much😍✨! I have a question, do I have to sand the acrylic tumbler then add decals or permanent vinyl? Or I can just add it then add brite tone ? Thanks😇
If you use permanent vinyl, you won't need to seal. If you're using waterslide, you will need to seal. Best results will be for you to sand the clear tumbler, apply a coat ot 2 of BT or GFand then apply the waterslide. The sanding will give a surface that the BT or GF or even epoxy to adhere to.
What waterslide paper do you use? I've tried Inkjet Waterslide Decal Paper. Even if I seal it, the image comes off the backing fast and image is ruined!
@@queenofthepack-nr9mw at the time I was new to making waterslides. I didn’t know the difference between sublimation printer vs inkjet. I printed with the wrong printer!🤦🏻♀️
![ไข้ขึ้นเลย! เมื่อแฝดโดนจัดเต็มวัคซีนครบ2เดือน🤒 [cc] แดนแพทตี้ SS2 | EP.54 |](http://i.ytimg.com/vi/z2VHItnyyvY/mqdefault.jpg)
Hello, you must be doing something right, that was perfect I'm going to have to try your ratio & that glitter omg very pretty!
Thank for sharing how you made the hole, I was going to use a glue gun but the rhinestone applicator is perfect because I do have one and thanks a perfect hole. 😊
Hey. Are you able to show the process of sanding,and what to do after that?
How many coats of brite tone did you do?
Are you using epoxy with bare hands?? And no respiratory protection?
No. This is Brite Tone by Crystalac. It's not resin or epoxy, it's a water based alternative. So no gloves or respiratory masks required.
Hi! What waterpaper slide did you use? How did you get the waterslide not to be transparent? Thanks!
There are both clear and white waterslide papers.
Thank you you much😍✨!
I have a question, do I have to sand the acrylic tumbler then add decals or permanent vinyl?
Or I can just add it then add brite tone ? Thanks😇
If you use permanent vinyl, you won't need to seal. If you're using waterslide, you will need to seal. Best results will be for you to sand the clear tumbler, apply a coat ot 2 of BT or GFand then apply the waterslide. The sanding will give a surface that the BT or GF or even epoxy to adhere to.
@@michellesamaniego5316 Thank you so much, I really appreciate it!! 🥰
Another thing also remember to use a mask and gloves when using resin… it’s very toxic.
@@jojosicairos6903 definitely!!
What paper you used for decal and logo sticker
I used glossy sticker paper.
@@michellesamaniego5316 place link inbox please
How did you seal the waterslide
Hi there, I sealed with a few coats of Rustoleum 2x Clear gloss.
What waterslide paper do you use? I've tried Inkjet Waterslide Decal Paper. Even if I seal it, the image comes off the backing fast and image is ruined!
????
@@queenofthepack-nr9mw at the time I was new to making waterslides. I didn’t know the difference between sublimation printer vs inkjet. I printed with the wrong printer!🤦🏻♀️
What is the ratio of water and glycerin mixed?
You can use whatever ratio you like, even just use the glycerine without the water. Test out ratios to find the flow that works best for you.